Hi, i have a problem with my setup. The box has 3 interfaces to the cable modem, to the dsl modem to the switch serving our other boxes all boxes on the switch have static ips behind the cable modem is a subnet with hosts with static ips on the sae subnet in behind the cable modem is also the default the arp-proxying is done between the cable interface and the switch interface the third goes to the adsl modem we do masqing on this interface now, some of the boxes on the switch are supposed to go out over the adsl line, and some are supposed to go via the gateway behind the cable modem. default route via the adsl, and a seperate table for those supposed to go via the cable. Now, when we add that table everything works as its supposed to. But if a windows box reboots it suddenly complains the switch interface had its ip and doesent configure the interface if we remove the table it boots fine Anyone have an idea what might be the problem? -- Arne 'zal' Hueggenberg <zalaster@xxxxxxxxxxxxxxxxxxxxxx>
