Hi! I use the following system: ppp0 fast Internet via DSL ippp0 slow Internet eth1 LAN Now I want to seperate traffic between these two internet interfaces depending on the destination address/port I searched through the archive and some articles seemed to be similar to my problem, but till now I could't solve this problem. ip route show : 195.2.0.3 dev ippp0 scope link 195.2.0.1 dev ippp0 proto kernel scope link src 195.2.0.3 212.88.181.5 dev ppp0 proto kernel scope link src 212.88.172.165 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.2 192.168.2.0/24 dev eth1 proto kernel scope link src 192.168.2.1 127.0.0.0/8 dev lo scope link default via 212.88.181.5 dev ppp0 ip rule show : 0: from all lookup local 32765: from all fwmark 1 lookup ippp0.out 32766: from all lookup main 32767: from all lookup 253 ip route show table ippp0.out : default via 195.2.0.1 dev ippp0 I used: $IPTABLES -A PREROUTING -t mangle -p TCP -d ! $LOCALNET --dport 8888 -j MARK --set-mark 1 echo 201 ippp0.out > /etc/iproute2/rt_tables ip rule add fwmark 1 table ippp0.out ip route add default via 195.3.65.85 dev ippp0 table ippp0.out then still all traffic goes through fast Interface ppp0 Does anybody know what kind of mistake I did? -- thanx Stefan Email: stefan.bayer@xxxxxxx ---------------------------------------------------- My Box said: "Install Win95 or better ..." So I installed Linux. Microsoft gives you Windows Linux gives you the whole house
