I have 2 cable modems with differant providers, connected to a nix box with 1 internal interface and 2 dmz if's.. to get both cable modems working at once, you simply need to remove the 2 default routes that each interface adds to the routing table upon startup.. however, you will then need to add static routes to each ISP's authentication server / POP server / dhcp server... selecting the device (dev ethX)... ie: route add -net isp1.pop.server.0/24 gw x.x.x.x dev eth1 route add -net isp2.pop.server.0/24 gw x.x.x.x dev eth2 at this point, both cable modems are stable and work, retreive email from each ISP's pop server via fetchmail, reply to ISP's heartbeats etc... you can then use netfilter (iptables) to mark packets going out, so, all traffic to tcp:80 (http), route via dev eth1 (faster link takes all outgoing web traffic).. however, my problem.. :) a web server listening on tcp:443 on eth1 (isp/cablemodem #1), is not contactable from the outside world, UNLESS this dev is set as the DEFAULT route for all traffic... can this be fixed with --SNAT ? or mark INCOMING packets with 5 say, then add route for mark 5 via dev ethX? help! :) --------------------------------------------------------------------- mBox makes you work Smarter, not Harder, from only $0.58 per WEEK! Visit http://www.mbox.com.au
