On 2015-04-08 19:40, Nadav Amit wrote:
> Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote:
>
>> On 2015-04-08 18:59, Nadav Amit wrote:
>>> Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote:
>>>
>>>> On 2015-04-08 18:40, Nadav Amit wrote:
>>>>> Hi,
>>>>>
>>>>> I would appreciate if someone explains the reason for enabling LINT0 during
>>>>> APIC reset. This does not correspond with Intel SDM Figure 10-8: “Local
>>>>> Vector Table” that says all LVT registers are reset to 0x10000.
>>>>>
>>>>> In kvm_lapic_reset, I see:
>>>>>
>>>>> apic_set_reg(apic, APIC_LVT0,
>>>>> SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
>>>>>
>>>>> Which is actually pretty similar to QEMU’s apic_reset_common:
>>>>>
>>>>> if (bsp) {
>>>>> /*
>>>>> * LINT0 delivery mode on CPU #0 is set to ExtInt at initialization
>>>>> * time typically by BIOS, so PIC interrupt can be delivered to the
>>>>> * processor when local APIC is enabled.
>>>>> */
>>>>> s->lvt[APIC_LVT_LINT0] = 0x700;
>>>>> }
>>>>>
>>>>> Yet, in both cases, I miss the point - if it is typically done by the BIOS,
>>>>> why does QEMU or KVM enable it?
>>>>>
>>>>> BTW: KVM seems to run fine without it, and I think setting it causes me
>>>>> problems in certain cases.
>>>>
>>>> I suspect it has some historic BIOS backgrounds. Already tried to find
>>>> more information in the git logs of both code bases? Or something that
>>>> indicates of SeaBIOS or BochsBIOS once didn't do this initialization?
>>> Thanks. I found no indication of such thing.
>>>
>>> QEMU’s commit message (0e21e12bb311c4c1095d0269dc2ef81196ccb60a) says:
>>>
>>> Don't route PIC interrupts through the local APIC if the local APIC
>>> config says so. By Ari Kivity.
>>>
>>> Maybe Avi Kivity knows this guy.
>>
>> ths? That should have been Thiemo Seufer (IIRC), but he just committed
>> the code back then (and is no longer with us, sadly).
> Oh… I am sorry - I didn’t know about that.. (I tried to make an unfunny joke
> about Avi knowing “Ari”).
Ah. No problem. My brain apparently fixed that typo up unnoticed.
>
>> But if that commit went in without any BIOS changes around it, QEMU
>> simply had to do the job of the latter to keep things working.
> So should I leave it as is? Can I at least disable in KVM during INIT (and
> leave it as is for RESET)?
No, I don't think there is a need to leave this inaccurate for QEMU if
our included BIOS gets it right. I don't know what the backward
bug-compatibility of KVM is, though. Maybe you can identify since when
our BIOS is fine so that we can discuss time frames.
Jan
--
Siemens AG, Corporate Technology, CT RTC ITP SES-DE
Corporate Competence Center Embedded Linux
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
