Atm on ILK we attempt to detect if eDP is present even if LVDS was
already detected and an encoder for it was registered. This involves
trying to read out the eDP EDID, which in turn needs the same power
sequencer that LVDS uses. Poking at the VDD line at an unexpected time
may or may not interfere with the LVDS panel, but it's probably safer to
prevent this. Registering both an LVDS and an eDP connector would also
present a similar problem accessing the shared PPS at any point later in
an unexpected way.
We also need this to be able fix PPS initialization before its first use
in the next patch. For that we want to be sure that PPS is not in use
by LVDS.
v2:
- Split out the PPS init fix to a separate patch. (Chris)
- Add comment about eDP init depending on LVDS init. (Chris)
- Make the use of the intel_encoder ptr less error prone.
CC: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
CC: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 5 +++++
drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8c6f4e2..b6bb438 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14708,6 +14708,11 @@ static void intel_setup_outputs(struct drm_device *dev)
struct intel_encoder *encoder;
bool dpd_is_edp = false;
+ /*
+ * intel_edp_init_connector() depends on this completing first, to
+ * prevent the registeration of both eDP and LVDS and the incorrect
+ * sharing of the PPS.
+ */
intel_lvds_init(dev);
if (intel_crt_present(dev))
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index be08351..5f7d731 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5303,9 +5303,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
{
struct drm_connector *connector = &intel_connector->base;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct intel_encoder *intel_encoder = &intel_dig_port->base;
- struct drm_device *dev = intel_encoder->base.dev;
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *intel_encoder;
struct drm_display_mode *fixed_mode = NULL;
struct drm_display_mode *downclock_mode = NULL;
bool has_dpcd;
@@ -5316,6 +5316,19 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
if (!is_edp(intel_dp))
return true;
+ /*
+ * On ILK we may get here with LVDS already registered. Since the
+ * driver uses the only internal power sequencer available for both
+ * eDP and LVDS bail out early in this case to prevent interfering
+ * with an already powered-on LVDS power sequencer.
+ */
+ for_each_intel_encoder(dev, intel_encoder) {
+ if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
+ DRM_INFO("LVDS was detected, not registering eDP\n");
+ return false;
+ }
+ }
+
pps_lock(intel_dp);
intel_edp_panel_vdd_sanitize(intel_dp);
pps_unlock(intel_dp);
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
