[PATCH 14/14] drm/i915: Configure eDP PLL freq from ironlake_edp_pll_on()

[ville.syrjala@xxxxxxxxxxxxxxx]

From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

ironlake_set_pll_cpu_edp() only gets called just before
ironlake_edp_pll_on(), so just pull the code into ironlake_edp_pll_on().

Also toss in a debug print into ironlake_edp_pll_off() to match the one
we have in ironlake_edp_pll_on().

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp.c | 45 +++++++++++++++++------------------------
 1 file changed, 19 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 63659e7..ba4cbf5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1542,28 +1542,6 @@ found:
 	return true;
 }
 
-static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp)
-{
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n",
-		      crtc->config->port_clock);
-
-	intel_dp->DP &= ~DP_PLL_FREQ_MASK;
-
-	if (crtc->config->port_clock == 162000)
-		intel_dp->DP |= DP_PLL_FREQ_162MHZ;
-	else
-		intel_dp->DP |= DP_PLL_FREQ_270MHZ;
-
-	I915_WRITE(DP_A, intel_dp->DP);
-	POSTING_READ(DP_A);
-	udelay(500);
-}
-
 void intel_dp_set_link_params(struct intel_dp *intel_dp,
 			      const struct intel_crtc_state *pipe_config)
 {
@@ -2173,7 +2151,20 @@ static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
 	assert_dp_port_disabled(intel_dp);
 	assert_edp_pll_disabled(dev_priv);
 
-	DRM_DEBUG_KMS("\n");
+	DRM_DEBUG_KMS("enabling eDP PLL for clock %d\n",
+		      crtc->config->port_clock);
+
+	intel_dp->DP &= ~DP_PLL_FREQ_MASK;
+
+	if (crtc->config->port_clock == 162000)
+		intel_dp->DP |= DP_PLL_FREQ_162MHZ;
+	else
+		intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+
+	I915_WRITE(DP_A, intel_dp->DP);
+	POSTING_READ(DP_A);
+	udelay(500);
+
 	intel_dp->DP |= DP_PLL_ENABLE;
 
 	I915_WRITE(DP_A, intel_dp->DP);
@@ -2191,6 +2182,8 @@ static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
 	assert_dp_port_disabled(intel_dp);
 	assert_edp_pll_enabled(dev_priv);
 
+	DRM_DEBUG_KMS("disabling eDP PLL\n");
+
 	intel_dp->DP &= ~DP_PLL_ENABLE;
 
 	I915_WRITE(DP_A, intel_dp->DP);
@@ -2390,6 +2383,8 @@ static void ilk_post_disable_dp(struct intel_encoder *encoder)
 	enum port port = dp_to_dig_port(intel_dp)->port;
 
 	intel_dp_link_down(intel_dp);
+
+	/* Only ilk+ has port A */
 	if (port == PORT_A)
 		ironlake_edp_pll_off(intel_dp);
 }
@@ -2670,10 +2665,8 @@ static void g4x_pre_enable_dp(struct intel_encoder *encoder)
 	}
 
 	/* Only ilk+ has port A */
-	if (port == PORT_A) {
-		ironlake_set_pll_cpu_edp(intel_dp);
+	if (port == PORT_A)
 		ironlake_edp_pll_on(intel_dp);
-	}
 }
 
 static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
-- 
2.4.10

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx