On Thu, Aug 06, 2015 at 02:47:22PM +0530, Animesh Manna wrote:
>
>
> On 8/5/2015 2:35 PM, Daniel Vetter wrote:
> >On Mon, Aug 03, 2015 at 09:55:33PM +0530, Animesh Manna wrote:
> >>Mmio register access after dc6/dc5 entry is not allowed when
> >>DC6 power states are enabled according to bspec (bspec-id 0527),
> >>so enabling dc6 as the last call in suspend flow.
> >>
> >>v1: Initial version.
> >>
> >>v2: commit message updated based on comment from Vathsala.
> >>
> >>Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> >>Cc: Damien Lespiau <damien.lespiau@xxxxxxxxx>
> >>Cc: Imre Deak <imre.deak@xxxxxxxxx>
> >>Cc: Sunil Kamath <sunil.kamath@xxxxxxxxx>
> >>Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
> >>Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
> >>Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@xxxxxxxxx>
> >>---
> >> drivers/gpu/drm/i915/i915_drv.c | 12 ++++++------
> >> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> >> drivers/gpu/drm/i915/intel_runtime_pm.c | 33 ++++++++-------------------------
> >> 3 files changed, 16 insertions(+), 31 deletions(-)
> >>
> >>diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> >>index 0d6775a..e1d0102 100644
> >>--- a/drivers/gpu/drm/i915/i915_drv.c
> >>+++ b/drivers/gpu/drm/i915/i915_drv.c
> >>@@ -1017,14 +1017,11 @@ static int skl_suspend_complete(struct drm_i915_private *dev_priv)
> >> {
> >> /* Enabling DC6 is not a hard requirement to enter runtime D3 */
> >>- /*
> >>- * This is to ensure that CSR isn't identified as loaded before
> >>- * CSR-loading program is called during runtime-resume.
> >>- */
> >>- intel_csr_load_status_set(dev_priv, FW_UNINITIALIZED);
> >Seems like an unrelated hunk. Separate patch (in the dmc loader rework
> >series) or an explanation why we need this.
>
> In the same skl_suspend_complete() later we are checking if firmware is loaded,
> based on that we trigger dc6, so the above hunk has to be removed in this patch.
> I will add explanation in my next patchset.
I know that later on we'll replace this with something else, but you can't
remove old code before the new code is there. And you can't do changes
like this here in unrelated patches.
> On the other hand firmware team confirmed that one time firmware loading
> during driver loading is sufficient, no need to load firmware in
> csr-address-space every suspend (dc6 entry) - resume (dc6 exit) flow, dmc will
> take care of it which eliminate any chance of regression.
And what about hibernate?
-Daniel
>
> - Animesh
>
> >
> >>-
> >> skl_uninit_cdclk(dev_priv);
> >>+ if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> >>+ skl_enable_dc6(dev_priv);
> >>+
> >> return 0;
> >> }
> >>@@ -1071,6 +1068,9 @@ static int skl_resume_prepare(struct drm_i915_private *dev_priv)
> >> {
> >> struct drm_device *dev = dev_priv->dev;
> >>+ if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> >>+ skl_disable_dc6(dev_priv);
> >>+
> >> skl_init_cdclk(dev_priv);
> >> intel_csr_load_program(dev);
> >>diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> >>index 47cef0e..06f346f 100644
> >>--- a/drivers/gpu/drm/i915/intel_drv.h
> >>+++ b/drivers/gpu/drm/i915/intel_drv.h
> >>@@ -1117,6 +1117,8 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv);
> >> void bxt_disable_dc9(struct drm_i915_private *dev_priv);
> >> void skl_init_cdclk(struct drm_i915_private *dev_priv);
> >> void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
> >>+void skl_enable_dc6(struct drm_i915_private *dev_priv);
> >>+void skl_disable_dc6(struct drm_i915_private *dev_priv);
> >> void intel_dp_get_m_n(struct intel_crtc *crtc,
> >> struct intel_crtc_state *pipe_config);
> >> void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
> >>diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>index 6393b76..c660245 100644
> >>--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>@@ -532,7 +532,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
> >> "DC6 already programmed to be disabled.\n");
> >> }
> >>-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >>+void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >> {
> >> uint32_t val;
> >>@@ -549,7 +549,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >> POSTING_READ(DC_STATE_EN);
> >> }
> >>-static void skl_disable_dc6(struct drm_i915_private *dev_priv)
> >>+void skl_disable_dc6(struct drm_i915_private *dev_priv)
> >> {
> >> uint32_t val;
> >Everything above seems to roughly be matching your patch description, but
> >not perfectly: You talk about suspend flow but also touch resume flow.
> >
> >But the hunks below are completely unexplained magic afaict. Either this
> >needs a separate patch or it needs seriously more explanation of what's
> >going on.
> >
> >>@@ -610,10 +610,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >> !I915_READ(HSW_PWR_WELL_BIOS),
> >> "Invalid for power well status to be enabled, unless done by the BIOS, \
> >> when request is to disable!\n");
> >>- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> >>- power_well->data == SKL_DISP_PW_2) {
> >>+ if (power_well->data == SKL_DISP_PW_2) {
> >>+ if (GEN9_ENABLE_DC5(dev))
> >>+ gen9_disable_dc5(dev_priv);
> >> if (SKL_ENABLE_DC6(dev)) {
> >>- skl_disable_dc6(dev_priv);
> >> /*
> >> * DDI buffer programming unnecessary during driver-load/resume
> >> * as it's already done during modeset initialization then.
> >>@@ -621,8 +621,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >> */
> >> if (!dev_priv->power_domains.initializing)
> >> intel_prepare_ddi(dev);
> >>- } else {
> >>- gen9_disable_dc5(dev_priv);
> >> }
> >> }
> >> I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
> >>@@ -642,24 +640,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >> POSTING_READ(HSW_PWR_WELL_DRIVER);
> >> DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
> >>- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> >>- power_well->data == SKL_DISP_PW_2) {
> >>- enum csr_state state;
> >>- /* TODO: wait for a completion event or
> >>- * similar here instead of busy
> >>- * waiting using wait_for function.
> >>- */
> >>- wait_for((state = intel_csr_load_status_get(dev_priv)) !=
> >>- FW_UNINITIALIZED, 1000);
> >>- if (state != FW_LOADED)
> >>- DRM_ERROR("CSR firmware not ready (%d)\n",
> >>- state);
> >>- else
> >>- if (SKL_ENABLE_DC6(dev))
> >>- skl_enable_dc6(dev_priv);
> >>- else
> >>- gen9_enable_dc5(dev_priv);
> >>- }
> >>+ if (GEN9_ENABLE_DC5(dev) &&
> >>+ power_well->data == SKL_DISP_PW_2)
> >>+ gen9_enable_dc5(dev_priv);
> >> }
> >> }
> >>--
> >>2.0.2
> >>
> >>_______________________________________________
> >>Intel-gfx mailing list
> >>Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> >>http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
