On Mon, Aug 03, 2015 at 09:55:33PM +0530, Animesh Manna wrote:
> Mmio register access after dc6/dc5 entry is not allowed when
> DC6 power states are enabled according to bspec (bspec-id 0527),
> so enabling dc6 as the last call in suspend flow.
>
> v1: Initial version.
>
> v2: commit message updated based on comment from Vathsala.
>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Cc: Damien Lespiau <damien.lespiau@xxxxxxxxx>
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Cc: Sunil Kamath <sunil.kamath@xxxxxxxxx>
> Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_drv.c | 12 ++++++------
> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> drivers/gpu/drm/i915/intel_runtime_pm.c | 33 ++++++++-------------------------
> 3 files changed, 16 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 0d6775a..e1d0102 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -1017,14 +1017,11 @@ static int skl_suspend_complete(struct drm_i915_private *dev_priv)
> {
> /* Enabling DC6 is not a hard requirement to enter runtime D3 */
>
> - /*
> - * This is to ensure that CSR isn't identified as loaded before
> - * CSR-loading program is called during runtime-resume.
> - */
> - intel_csr_load_status_set(dev_priv, FW_UNINITIALIZED);
Seems like an unrelated hunk. Separate patch (in the dmc loader rework
series) or an explanation why we need this.
> -
> skl_uninit_cdclk(dev_priv);
>
> + if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> + skl_enable_dc6(dev_priv);
> +
> return 0;
> }
>
> @@ -1071,6 +1068,9 @@ static int skl_resume_prepare(struct drm_i915_private *dev_priv)
> {
> struct drm_device *dev = dev_priv->dev;
>
> + if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> + skl_disable_dc6(dev_priv);
> +
> skl_init_cdclk(dev_priv);
> intel_csr_load_program(dev);
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 47cef0e..06f346f 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1117,6 +1117,8 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv);
> void bxt_disable_dc9(struct drm_i915_private *dev_priv);
> void skl_init_cdclk(struct drm_i915_private *dev_priv);
> void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
> +void skl_enable_dc6(struct drm_i915_private *dev_priv);
> +void skl_disable_dc6(struct drm_i915_private *dev_priv);
> void intel_dp_get_m_n(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config);
> void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 6393b76..c660245 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -532,7 +532,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
> "DC6 already programmed to be disabled.\n");
> }
>
> -static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> +void skl_enable_dc6(struct drm_i915_private *dev_priv)
> {
> uint32_t val;
>
> @@ -549,7 +549,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> POSTING_READ(DC_STATE_EN);
> }
>
> -static void skl_disable_dc6(struct drm_i915_private *dev_priv)
> +void skl_disable_dc6(struct drm_i915_private *dev_priv)
> {
> uint32_t val;
Everything above seems to roughly be matching your patch description, but
not perfectly: You talk about suspend flow but also touch resume flow.
But the hunks below are completely unexplained magic afaict. Either this
needs a separate patch or it needs seriously more explanation of what's
going on.
>
> @@ -610,10 +610,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> !I915_READ(HSW_PWR_WELL_BIOS),
> "Invalid for power well status to be enabled, unless done by the BIOS, \
> when request is to disable!\n");
> - if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> - power_well->data == SKL_DISP_PW_2) {
> + if (power_well->data == SKL_DISP_PW_2) {
> + if (GEN9_ENABLE_DC5(dev))
> + gen9_disable_dc5(dev_priv);
> if (SKL_ENABLE_DC6(dev)) {
> - skl_disable_dc6(dev_priv);
> /*
> * DDI buffer programming unnecessary during driver-load/resume
> * as it's already done during modeset initialization then.
> @@ -621,8 +621,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> */
> if (!dev_priv->power_domains.initializing)
> intel_prepare_ddi(dev);
> - } else {
> - gen9_disable_dc5(dev_priv);
> }
> }
> I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
> @@ -642,24 +640,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> POSTING_READ(HSW_PWR_WELL_DRIVER);
> DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
>
> - if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> - power_well->data == SKL_DISP_PW_2) {
> - enum csr_state state;
> - /* TODO: wait for a completion event or
> - * similar here instead of busy
> - * waiting using wait_for function.
> - */
> - wait_for((state = intel_csr_load_status_get(dev_priv)) !=
> - FW_UNINITIALIZED, 1000);
> - if (state != FW_LOADED)
> - DRM_ERROR("CSR firmware not ready (%d)\n",
> - state);
> - else
> - if (SKL_ENABLE_DC6(dev))
> - skl_enable_dc6(dev_priv);
> - else
> - gen9_enable_dc5(dev_priv);
> - }
> + if (GEN9_ENABLE_DC5(dev) &&
> + power_well->data == SKL_DISP_PW_2)
> + gen9_enable_dc5(dev_priv);
> }
> }
>
> --
> 2.0.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
