Mmio register access after dc6/dc5 entry is not allowed when
DC6 power states are enabled according to bspec (bspec-id 0527),
so enabling dc6 as the last call in suspend flow.
Before triggering dc6 a condition check added to check firmware
loading status. Removed the set call for firmware loading state
to uninitilaze. As dmc will handle firmware loading in dc6 exit
flow, so we do not need the uninitialize call at all.
v1: Initial version.
v2: commit message updated based on comment from Vathsala.
v3: Added explanation in commit description for removed
intel_csr_load_status_set call in skl_suspend_complete()
(Suggested by Daniel).
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Damien Lespiau <damien.lespiau@xxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Sunil Kamath <sunil.kamath@xxxxxxxxx>
Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.c | 12 ++++++------
drivers/gpu/drm/i915/intel_drv.h | 2 ++
drivers/gpu/drm/i915/intel_runtime_pm.c | 33 ++++++++-------------------------
3 files changed, 16 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0d6775a..e1d0102 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1017,14 +1017,11 @@ static int skl_suspend_complete(struct drm_i915_private *dev_priv)
{
/* Enabling DC6 is not a hard requirement to enter runtime D3 */
- /*
- * This is to ensure that CSR isn't identified as loaded before
- * CSR-loading program is called during runtime-resume.
- */
- intel_csr_load_status_set(dev_priv, FW_UNINITIALIZED);
-
skl_uninit_cdclk(dev_priv);
+ if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
+ skl_enable_dc6(dev_priv);
+
return 0;
}
@@ -1071,6 +1068,9 @@ static int skl_resume_prepare(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
+ if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
+ skl_disable_dc6(dev_priv);
+
skl_init_cdclk(dev_priv);
intel_csr_load_program(dev);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 47cef0e..06f346f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1117,6 +1117,8 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv);
void bxt_disable_dc9(struct drm_i915_private *dev_priv);
void skl_init_cdclk(struct drm_i915_private *dev_priv);
void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
+void skl_enable_dc6(struct drm_i915_private *dev_priv);
+void skl_disable_dc6(struct drm_i915_private *dev_priv);
void intel_dp_get_m_n(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 6393b76..c660245 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -532,7 +532,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
"DC6 already programmed to be disabled.\n");
}
-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
+void skl_enable_dc6(struct drm_i915_private *dev_priv)
{
uint32_t val;
@@ -549,7 +549,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
POSTING_READ(DC_STATE_EN);
}
-static void skl_disable_dc6(struct drm_i915_private *dev_priv)
+void skl_disable_dc6(struct drm_i915_private *dev_priv)
{
uint32_t val;
@@ -610,10 +610,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
!I915_READ(HSW_PWR_WELL_BIOS),
"Invalid for power well status to be enabled, unless done by the BIOS, \
when request is to disable!\n");
- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
- power_well->data == SKL_DISP_PW_2) {
+ if (power_well->data == SKL_DISP_PW_2) {
+ if (GEN9_ENABLE_DC5(dev))
+ gen9_disable_dc5(dev_priv);
if (SKL_ENABLE_DC6(dev)) {
- skl_disable_dc6(dev_priv);
/*
* DDI buffer programming unnecessary during driver-load/resume
* as it's already done during modeset initialization then.
@@ -621,8 +621,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
*/
if (!dev_priv->power_domains.initializing)
intel_prepare_ddi(dev);
- } else {
- gen9_disable_dc5(dev_priv);
}
}
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
@@ -642,24 +640,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
- power_well->data == SKL_DISP_PW_2) {
- enum csr_state state;
- /* TODO: wait for a completion event or
- * similar here instead of busy
- * waiting using wait_for function.
- */
- wait_for((state = intel_csr_load_status_get(dev_priv)) !=
- FW_UNINITIALIZED, 1000);
- if (state != FW_LOADED)
- DRM_ERROR("CSR firmware not ready (%d)\n",
- state);
- else
- if (SKL_ENABLE_DC6(dev))
- skl_enable_dc6(dev_priv);
- else
- gen9_enable_dc5(dev_priv);
- }
+ if (GEN9_ENABLE_DC5(dev) &&
+ power_well->data == SKL_DISP_PW_2)
+ gen9_enable_dc5(dev_priv);
}
}
--
2.0.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
