From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Move the DDL precision handling into vlv_compute_drain_latency() so the
callers don't have to duplicate the same code to deal with it.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 8 ++---
drivers/gpu/drm/i915/intel_pm.c | 74 +++++++++++++++--------------------------
2 files changed, 28 insertions(+), 54 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 230320b..b35aaf3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4167,15 +4167,11 @@ enum skl_disp_power_wells {
/* drain latency register values*/
#define VLV_DDL(pipe) (VLV_DISPLAY_BASE + 0x70050 + 4 * (pipe))
-#define DDL_CURSOR_PRECISION_HIGH (1<<31)
-#define DDL_CURSOR_PRECISION_LOW (0<<31)
#define DDL_CURSOR_SHIFT 24
-#define DDL_SPRITE_PRECISION_HIGH(sprite) (1<<(15+8*(sprite)))
-#define DDL_SPRITE_PRECISION_LOW(sprite) (0<<(15+8*(sprite)))
#define DDL_SPRITE_SHIFT(sprite) (8+8*(sprite))
-#define DDL_PLANE_PRECISION_HIGH (1<<7)
-#define DDL_PLANE_PRECISION_LOW (0<<7)
#define DDL_PLANE_SHIFT 0
+#define DDL_PRECISION_HIGH (1<<7)
+#define DDL_PRECISION_LOW (0<<7)
#define DRAIN_LATENCY_MASK 0x7f
/* FIFO watermark sizes etc */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index d6c6c1b..c4c2317 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -711,35 +711,35 @@ static bool g4x_compute_srwm(struct drm_device *dev,
display, cursor);
}
-static bool vlv_compute_drain_latency(struct drm_crtc *crtc,
- int pixel_size,
- int *prec_mult,
- int *drain_latency)
+static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc,
+ int pixel_size)
{
struct drm_device *dev = crtc->dev;
- int entries;
+ int entries, prec_mult, drain_latency;
int clock = to_intel_crtc(crtc)->config->base.adjusted_mode.crtc_clock;
+ const int high_precision = IS_CHERRYVIEW(dev) ? 16 : 64;
if (WARN(clock == 0, "Pixel clock is zero!\n"))
- return false;
+ return 0;
if (WARN(pixel_size == 0, "Pixel size is zero!\n"))
- return false;
+ return 0;
entries = DIV_ROUND_UP(clock, 1000) * pixel_size;
- *prec_mult = IS_CHERRYVIEW(dev) ? 16 : 64;
- *drain_latency = (64 * (*prec_mult) * 4) / entries;
+ prec_mult = high_precision;
+ drain_latency = 64 * prec_mult * 4 / entries;
- if (*drain_latency > DRAIN_LATENCY_MASK) {
- *prec_mult /= 2;
- *drain_latency = (64 * (*prec_mult) * 4) / entries;
+ if (drain_latency > DRAIN_LATENCY_MASK) {
+ prec_mult /= 2;
+ drain_latency = 64 * prec_mult * 4 / entries;
}
- if (*drain_latency > DRAIN_LATENCY_MASK)
- *drain_latency = DRAIN_LATENCY_MASK;
+ if (drain_latency > DRAIN_LATENCY_MASK)
+ drain_latency = DRAIN_LATENCY_MASK;
- return true;
+ return drain_latency | (prec_mult == high_precision ?
+ DDL_PRECISION_HIGH : DDL_PRECISION_LOW);
}
/*
@@ -756,14 +756,12 @@ static void vlv_update_drain_latency(struct drm_crtc *crtc)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pixel_size;
- int drain_latency;
enum pipe pipe = intel_crtc->pipe;
- int plane_prec, prec_mult, plane_dl;
- const int high_precision = IS_CHERRYVIEW(dev) ? 16 : 64;
+ int plane_dl;
- plane_dl = I915_READ(VLV_DDL(pipe)) & ~(DDL_PLANE_PRECISION_HIGH |
- DRAIN_LATENCY_MASK | DDL_CURSOR_PRECISION_HIGH |
- (DRAIN_LATENCY_MASK << DDL_CURSOR_SHIFT));
+ plane_dl = I915_READ(VLV_DDL(pipe)) &
+ ~(((DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK) << DDL_CURSOR_SHIFT) |
+ ((DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK) << DDL_PLANE_SHIFT));
if (!intel_crtc_active(crtc)) {
I915_WRITE(VLV_DDL(pipe), plane_dl);
@@ -772,12 +770,7 @@ static void vlv_update_drain_latency(struct drm_crtc *crtc)
/* Primary plane Drain Latency */
pixel_size = crtc->primary->fb->bits_per_pixel / 8; /* BPP */
- if (vlv_compute_drain_latency(crtc, pixel_size, &prec_mult, &drain_latency)) {
- plane_prec = (prec_mult == high_precision) ?
- DDL_PLANE_PRECISION_HIGH :
- DDL_PLANE_PRECISION_LOW;
- plane_dl |= plane_prec | drain_latency;
- }
+ plane_dl = vlv_compute_drain_latency(crtc, pixel_size) << DDL_PLANE_SHIFT;
/* Cursor Drain Latency
* BPP is always 4 for cursor
@@ -785,13 +778,8 @@ static void vlv_update_drain_latency(struct drm_crtc *crtc)
pixel_size = 4;
/* Program cursor DL only if it is enabled */
- if (intel_crtc->cursor_base &&
- vlv_compute_drain_latency(crtc, pixel_size, &prec_mult, &drain_latency)) {
- plane_prec = (prec_mult == high_precision) ?
- DDL_CURSOR_PRECISION_HIGH :
- DDL_CURSOR_PRECISION_LOW;
- plane_dl |= plane_prec | (drain_latency << DDL_CURSOR_SHIFT);
- }
+ if (intel_crtc->cursor_base)
+ plane_dl |= vlv_compute_drain_latency(crtc, pixel_size) << DDL_CURSOR_SHIFT;
I915_WRITE(VLV_DDL(pipe), plane_dl);
}
@@ -953,23 +941,13 @@ static void valleyview_update_sprite_wm(struct drm_plane *plane,
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe = to_intel_plane(plane)->pipe;
int sprite = to_intel_plane(plane)->plane;
- int drain_latency;
- int plane_prec;
int sprite_dl;
- int prec_mult;
- const int high_precision = IS_CHERRYVIEW(dev) ? 16 : 64;
- sprite_dl = I915_READ(VLV_DDL(pipe)) & ~(DDL_SPRITE_PRECISION_HIGH(sprite) |
- (DRAIN_LATENCY_MASK << DDL_SPRITE_SHIFT(sprite)));
+ sprite_dl = I915_READ(VLV_DDL(pipe)) &
+ ~((DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK) << DDL_SPRITE_SHIFT(sprite));
- if (enabled && vlv_compute_drain_latency(crtc, pixel_size, &prec_mult,
- &drain_latency)) {
- plane_prec = (prec_mult == high_precision) ?
- DDL_SPRITE_PRECISION_HIGH(sprite) :
- DDL_SPRITE_PRECISION_LOW(sprite);
- sprite_dl |= plane_prec |
- (drain_latency << DDL_SPRITE_SHIFT(sprite));
- }
+ if (enabled)
+ sprite_dl |= vlv_compute_drain_latency(crtc, pixel_size) << DDL_SPRITE_SHIFT(sprite);
I915_WRITE(VLV_DDL(pipe), sprite_dl);
}
--
2.0.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
