On Tue, Mar 04, 2025 at 01:49:45PM +0530, Ankit Nautiyal wrote:
VRR with joiner is currently disabled as it still needs some work to
correctly sequence the primary and secondary transcoders. However, we can
still use VRR Timing generator in fixed refresh rate for joiner and since
it just need to program vrr timings once and does not involve changing
timings on the fly. We still need to skip the VRR and LRR for joiner.
To achieve this set vrr.in_range to 0 for joiner case, so that we do not
try VRR and LRR for the joiner case.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_vrr.c | 38 +++++++++++++++++++-----
1 file changed, 31 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index 0dfe6220ff4a..2b6d022434d2 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -292,6 +292,9 @@ void intel_vrr_set_fixed_rr_timings(const struct intel_crtc_state *crtc_state)
if (!intel_vrr_possible(crtc_state))
return;
+ if (intel_crtc_is_joiner_secondary(crtc_state))
+ return;
I don't think this gets called on the secondary crtc anyway.
+
intel_de_write(display, TRANS_VRR_VMIN(display, cpu_transcoder),
intel_vrr_fixed_rr_vmin(crtc_state) - 1);
intel_de_write(display, TRANS_VRR_VMAX(display, cpu_transcoder),
@@ -349,19 +352,23 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
if (!HAS_VRR(display))
return;
- /*
- * FIXME all joined pipes share the same transcoder.
- * Need to account for that during VRR toggle/push/etc.
- */
- if (crtc_state->joiner_pipes)
- return;
-
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
return;
crtc_state->vrr.in_range =
intel_vrr_is_in_range(connector, drm_mode_vrefresh(adjusted_mode));
+ /*
+ * Allow fixed refresh rate with VRR Timing Generator.
+ * For now set the vrr.in_range to 0, to allow fixed_rr but skip actual
+ * VRR and LRR.
+ * #TODO For actual VRR with joiner, we need to figure out how to
+ * correctly sequence transcoder level stuff vs. pipe level stuff
+ * in the commit.
+ */
+ if (crtc_state->joiner_pipes)
+ crtc_state->vrr.in_range = 0;
+
vmin = intel_vrr_compute_vmin(crtc_state);
if (crtc_state->vrr.in_range) {
@@ -448,6 +455,8 @@ void intel_vrr_set_transcoder_timings(const struct intel_crtc_state *crtc_state)
struct intel_display *display = to_intel_display(crtc_state);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+ if (intel_crtc_is_joiner_secondary(crtc_state))
+ return;
Also shouldn't get called on the secondary.
/*
* This bit seems to have two meanings depending on the platform:
* TGL: generate VRR "safe window" for DSB vblank waits
@@ -486,6 +495,9 @@ void intel_vrr_send_push(struct intel_dsb *dsb,
if (!crtc_state->vrr.enable)
return;
+ if (intel_crtc_is_joiner_secondary(crtc_state))
+ return;
+
if (dsb)
intel_dsb_nonpost_start(dsb);
@@ -560,6 +572,9 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)
if (!crtc_state->vrr.enable)
return;
+ if (intel_crtc_is_joiner_secondary(crtc_state))
+ return;
+
intel_de_write(display, TRANS_VRR_VMIN(display, cpu_transcoder),
crtc_state->vrr.vmin - 1);
intel_de_write(display, TRANS_VRR_VMAX(display, cpu_transcoder),
@@ -590,6 +605,9 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
if (!old_crtc_state->vrr.enable)
return;
+ if (intel_crtc_is_joiner_secondary(old_crtc_state))
+ return;
All thosea three cases should be impossible on account of
vrr.enable==false.
+
if (!intel_vrr_always_use_vrr_tg(display)) {
intel_de_write(display, TRANS_VRR_CTL(display, cpu_transcoder),
trans_vrr_ctl(old_crtc_state));
@@ -613,6 +631,9 @@ void intel_vrr_transcoder_enable(const struct intel_crtc_state *crtc_state)
if (!intel_vrr_possible(crtc_state))
return;
+ if (intel_crtc_is_joiner_secondary(crtc_state))
+ return;
+
if (!intel_vrr_always_use_vrr_tg(display)) {
intel_de_write(display, TRANS_VRR_CTL(display, cpu_transcoder),
trans_vrr_ctl(crtc_state));
@@ -637,6 +658,9 @@ void intel_vrr_transcoder_disable(const struct intel_crtc_state *crtc_state)
if (!intel_vrr_possible(crtc_state))
return;
+ if (intel_crtc_is_joiner_secondary(crtc_state))
+ return;
And these two again shouldn't be called on the secondary crtc.
So I think you should be able to drop all the
intel_crtc_is_joiner_secondary() checks from this patch.
