Re: [PATCH 13/13] drm/i915: do not save/restore backlight registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 08, 2013 at 04:49:05PM +0200, Jani Nikula wrote:
> The backlight enable code now has the smarts to do the right thing.
> 
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>

You can't just kill this due to ums code, instead it needs to be protected
by if (!DRIVER_MODESET) checks.
-Daniel

> ---
>  drivers/gpu/drm/i915/i915_drv.h     |    6 -----
>  drivers/gpu/drm/i915/i915_suspend.c |   45 -----------------------------------
>  2 files changed, 51 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 500bab3..6fec21e 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -766,13 +766,7 @@ struct i915_suspend_saved_registers {
>  	u32 saveDSPATILEOFF;
>  	u32 savePFIT_PGM_RATIOS;
>  	u32 saveBLC_HIST_CTL;
> -	u32 saveBLC_PWM_CTL;
> -	u32 saveBLC_PWM_CTL2;
>  	u32 saveBLC_HIST_CTL_B;
> -	u32 saveBLC_PWM_CTL_B;
> -	u32 saveBLC_PWM_CTL2_B;
> -	u32 saveBLC_CPU_PWM_CTL;
> -	u32 saveBLC_CPU_PWM_CTL2;
>  	u32 saveFPB0;
>  	u32 saveFPB1;
>  	u32 saveDPLL_B;
> diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
> index eadf8e1..6b8fef7 100644
> --- a/drivers/gpu/drm/i915/i915_suspend.c
> +++ b/drivers/gpu/drm/i915/i915_suspend.c
> @@ -192,7 +192,6 @@ static void i915_restore_vga(struct drm_device *dev)
>  static void i915_save_display(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> -	unsigned long flags;
>  
>  	/* Display arbitration control */
>  	if (INTEL_INFO(dev)->gen <= 4)
> @@ -203,46 +202,27 @@ static void i915_save_display(struct drm_device *dev)
>  	if (!drm_core_check_feature(dev, DRIVER_MODESET))
>  		i915_save_display_reg(dev);
>  
> -	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
> -
>  	/* LVDS state */
>  	if (HAS_PCH_SPLIT(dev)) {
>  		dev_priv->regfile.savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
> -		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
> -		dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
> -		dev_priv->regfile.saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
> -		dev_priv->regfile.saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
>  		if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
>  			dev_priv->regfile.saveLVDS = I915_READ(PCH_LVDS);
>  	} else if (IS_VALLEYVIEW(dev)) {
>  		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
>  		dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
>  
> -		dev_priv->regfile.saveBLC_PWM_CTL =
> -			I915_READ(VLV_BLC_PWM_CTL(PIPE_A));
>  		dev_priv->regfile.saveBLC_HIST_CTL =
>  			I915_READ(VLV_BLC_HIST_CTL(PIPE_A));
> -		dev_priv->regfile.saveBLC_PWM_CTL2 =
> -			I915_READ(VLV_BLC_PWM_CTL2(PIPE_A));
> -		dev_priv->regfile.saveBLC_PWM_CTL_B =
> -			I915_READ(VLV_BLC_PWM_CTL(PIPE_B));
>  		dev_priv->regfile.saveBLC_HIST_CTL_B =
>  			I915_READ(VLV_BLC_HIST_CTL(PIPE_B));
> -		dev_priv->regfile.saveBLC_PWM_CTL2_B =
> -			I915_READ(VLV_BLC_PWM_CTL2(PIPE_B));
>  	} else {
>  		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
>  		dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
> -		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
>  		dev_priv->regfile.saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
> -		if (INTEL_INFO(dev)->gen >= 4)
> -			dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
>  		if (IS_MOBILE(dev) && !IS_I830(dev))
>  			dev_priv->regfile.saveLVDS = I915_READ(LVDS);
>  	}
>  
> -	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
> -
>  	if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev))
>  		dev_priv->regfile.savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
>  
> @@ -278,7 +258,6 @@ static void i915_restore_display(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u32 mask = 0xffffffff;
> -	unsigned long flags;
>  
>  	/* Display arbitration */
>  	if (INTEL_INFO(dev)->gen <= 4)
> @@ -287,12 +266,6 @@ static void i915_restore_display(struct drm_device *dev)
>  	if (!drm_core_check_feature(dev, DRIVER_MODESET))
>  		i915_restore_display_reg(dev);
>  
> -	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
> -
> -	/* LVDS state */
> -	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
> -		I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
> -
>  	if (drm_core_check_feature(dev, DRIVER_MODESET))
>  		mask = ~LVDS_PORT_EN;
>  
> @@ -305,13 +278,6 @@ static void i915_restore_display(struct drm_device *dev)
>  		I915_WRITE(PFIT_CONTROL, dev_priv->regfile.savePFIT_CONTROL);
>  
>  	if (HAS_PCH_SPLIT(dev)) {
> -		I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->regfile.saveBLC_PWM_CTL);
> -		I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
> -		/* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
> -		 * otherwise we get blank eDP screen after S3 on some machines
> -		 */
> -		I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->regfile.saveBLC_CPU_PWM_CTL2);
> -		I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->regfile.saveBLC_CPU_PWM_CTL);
>  		I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
>  		I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
>  		I915_WRITE(PCH_PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
> @@ -319,21 +285,12 @@ static void i915_restore_display(struct drm_device *dev)
>  		I915_WRITE(RSTDBYCTL,
>  			   dev_priv->regfile.saveMCHBAR_RENDER_STANDBY);
>  	} else if (IS_VALLEYVIEW(dev)) {
> -		I915_WRITE(VLV_BLC_PWM_CTL(PIPE_A),
> -			   dev_priv->regfile.saveBLC_PWM_CTL);
>  		I915_WRITE(VLV_BLC_HIST_CTL(PIPE_A),
>  			   dev_priv->regfile.saveBLC_HIST_CTL);
> -		I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_A),
> -			   dev_priv->regfile.saveBLC_PWM_CTL2);
> -		I915_WRITE(VLV_BLC_PWM_CTL(PIPE_B),
> -			   dev_priv->regfile.saveBLC_PWM_CTL);
>  		I915_WRITE(VLV_BLC_HIST_CTL(PIPE_B),
>  			   dev_priv->regfile.saveBLC_HIST_CTL);
> -		I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_B),
> -			   dev_priv->regfile.saveBLC_PWM_CTL2);
>  	} else {
>  		I915_WRITE(PFIT_PGM_RATIOS, dev_priv->regfile.savePFIT_PGM_RATIOS);
> -		I915_WRITE(BLC_PWM_CTL, dev_priv->regfile.saveBLC_PWM_CTL);
>  		I915_WRITE(BLC_HIST_CTL, dev_priv->regfile.saveBLC_HIST_CTL);
>  		I915_WRITE(PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
>  		I915_WRITE(PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
> @@ -341,8 +298,6 @@ static void i915_restore_display(struct drm_device *dev)
>  		I915_WRITE(PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
>  	}
>  
> -	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
> -
>  	/* only restore FBC info on the platform that supports FBC*/
>  	intel_disable_fbc(dev);
>  	if (I915_HAS_FBC(dev)) {
> -- 
> 1.7.10.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux