Re: [PATCH 1/2] drm/i915: Kill vlv_update_rps_cur_delay()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu,  7 Nov 2013 19:57:48 +0200
ville.syrjala@xxxxxxxxxxxxxxx wrote:

> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> Polling to make sure the current GPU frequency matches the last
> requested frequency should not be necessay, and if there's some
> throttling involved, the two might not match anyway.
> 
> Since we're still seeing this trigger occasionally, and it just
> introduces a rather pointless 10 ms delay, it seems like better
> to kill it off.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 27 ---------------------------
>  1 file changed, 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 0a07d7c..f6f9dfe 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3606,31 +3606,6 @@ void gen6_rps_boost(struct drm_i915_private *dev_priv)
>  	mutex_unlock(&dev_priv->rps.hw_lock);
>  }
>  
> -/*
> - * Wait until the previous freq change has completed,
> - * or the timeout elapsed, and then update our notion
> - * of the current GPU frequency.
> - */
> -static void vlv_update_rps_cur_delay(struct drm_i915_private *dev_priv)
> -{
> -	u32 pval;
> -
> -	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> -
> -	if (wait_for(((pval = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS)) & GENFREQSTATUS) == 0, 10))
> -		DRM_DEBUG_DRIVER("timed out waiting for Punit\n");
> -
> -	pval >>= 8;
> -
> -	if (pval != dev_priv->rps.cur_delay)
> -		DRM_DEBUG_DRIVER("Punit overrode GPU freq: %d MHz (%u) requested, but got %d Mhz (%u)\n",
> -				 vlv_gpu_freq(dev_priv->mem_freq, dev_priv->rps.cur_delay),
> -				 dev_priv->rps.cur_delay,
> -				 vlv_gpu_freq(dev_priv->mem_freq, pval), pval);
> -
> -	dev_priv->rps.cur_delay = pval;
> -}
> -
>  void valleyview_set_rps(struct drm_device *dev, u8 val)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3641,8 +3616,6 @@ void valleyview_set_rps(struct drm_device *dev, u8 val)
>  	WARN_ON(val > dev_priv->rps.max_delay);
>  	WARN_ON(val < dev_priv->rps.min_delay);
>  
> -	vlv_update_rps_cur_delay(dev_priv);
> -
>  	DRM_DEBUG_DRIVER("GPU freq request from %d MHz (%u) to %d MHz (%u)\n",
>  			 vlv_gpu_freq(dev_priv->mem_freq,
>  				      dev_priv->rps.cur_delay),

Yeah, this was just debug code to make sure turbo was working early
on. No longer needed.

Reviewed-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>

-- 
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux