Re: [PATCH 06/11] drm/i915/dp_mst: Sanitize calculating the DSC DPT bpp limit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 26, 2024 at 01:13:38PM -0700, Manasi Navare wrote:
> Hi Imre,
> 
> Would this impact/fix DSC functionality on ADL based platforms as well
> or will this change only impact platforms that support UHBR?

The related DPT limit changes in this patchset make a difference only
on platforms supporting UHBR, so DG2 and MTL+.

> Manasi
> 
> On Tue, Mar 26, 2024 at 5:55 AM Nautiyal, Ankit K
> <ankit.k.nautiyal@xxxxxxxxx> wrote:
> >
> >
> > On 3/21/2024 1:41 AM, Imre Deak wrote:
> > > Instead of checking each compressed bpp value against the maximum
> > > DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and
> > > limiting the range of bpps looped over using this maximum.
> > >
> > > While at it add a comment about the origin of the DSC/DPT bpp limit.
> > >
> > > Bspec: 49259, 68912
> > >
> > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> >
> > LGTM.
> >
> > Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
> >
> > > ---
> > >   drivers/gpu/drm/i915/display/intel_dp_mst.c | 45 +++++++++++----------
> > >   1 file changed, 23 insertions(+), 22 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > index 40660dc5edb45..516b00f791420 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > @@ -51,27 +51,24 @@
> > >   #include "intel_vdsc.h"
> > >   #include "skl_scaler.h"
> > >
> > > -static int intel_dp_mst_check_constraints(struct drm_i915_private *i915, int bpp,
> > > -                                       const struct drm_display_mode *adjusted_mode,
> > > -                                       struct intel_crtc_state *crtc_state,
> > > -                                       bool dsc)
> > > +static int intel_dp_mst_max_dpt_bpp(const struct intel_crtc_state *crtc_state,
> > > +                                 bool dsc)
> > >   {
> > > -     if (intel_dp_is_uhbr(crtc_state) && DISPLAY_VER(i915) < 20 && dsc) {
> > > -             int output_bpp = bpp;
> > > -             int symbol_clock = intel_dp_link_symbol_clock(crtc_state->port_clock);
> > > -             int available_bw = mul_u32_u32(symbol_clock * 72,
> > > -                                            drm_dp_bw_channel_coding_efficiency(true)) /
> > > -                                1000000;
> > > +     struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
> > > +     const struct drm_display_mode *adjusted_mode =
> > > +             &crtc_state->hw.adjusted_mode;
> > >
> > > -             if (output_bpp * adjusted_mode->crtc_clock >
> > > -                 available_bw) {
> > > -                     drm_dbg_kms(&i915->drm, "UHBR check failed(required bw %d available %d)\n",
> > > -                                 output_bpp * adjusted_mode->crtc_clock, available_bw);
> > > -                     return -EINVAL;
> > > -             }
> > > -     }
> > > +     if (!intel_dp_is_uhbr(crtc_state) || DISPLAY_VER(i915) >= 20 || !dsc)
> > > +             return INT_MAX;
> > >
> > > -     return 0;
> > > +     /*
> > > +      * DSC->DPT interface width:
> > > +      *   ICL-MTL: 72 bits (each branch has 72 bits, only left branch is used)
> > > +      *   LNL+:    144 bits (not a bottleneck in any config)
> > > +      */
> > > +     return div64_u64(mul_u32_u32(intel_dp_link_symbol_clock(crtc_state->port_clock) * 72,
> > > +                                  drm_dp_bw_channel_coding_efficiency(true)),
> > > +                      mul_u32_u32(adjusted_mode->crtc_clock, 1000000));
> > >   }
> > >
> > >   static int intel_dp_mst_bw_overhead(const struct intel_crtc_state *crtc_state,
> > > @@ -160,6 +157,7 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
> > >       const struct drm_display_mode *adjusted_mode =
> > >               &crtc_state->hw.adjusted_mode;
> > >       int bpp, slots = -EINVAL;
> > > +     int max_dpt_bpp;
> > >       int ret = 0;
> > >
> > >       mst_state = drm_atomic_get_mst_topology_state(state, &intel_dp->mst_mgr);
> > > @@ -180,6 +178,13 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
> > >                                                     crtc_state->port_clock,
> > >                                                     crtc_state->lane_count);
> > >
> > > +     max_dpt_bpp = intel_dp_mst_max_dpt_bpp(crtc_state, dsc);
> > > +     if (max_bpp > max_dpt_bpp) {
> > > +             drm_dbg_kms(&i915->drm, "Limiting bpp to max DPT bpp (%d -> %d)\n",
> > > +                         max_bpp, max_dpt_bpp);
> > > +             max_bpp = max_dpt_bpp;
> > > +     }
> > > +
> > >       drm_dbg_kms(&i915->drm, "Looking for slots in range min bpp %d max bpp %d\n",
> > >                   min_bpp, max_bpp);
> > >
> > > @@ -191,10 +196,6 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
> > >
> > >               drm_dbg_kms(&i915->drm, "Trying bpp %d\n", bpp);
> > >
> > > -             ret = intel_dp_mst_check_constraints(i915, bpp, adjusted_mode, crtc_state, dsc);
> > > -             if (ret)
> > > -                     continue;
> > > -
> > >               link_bpp_x16 = to_bpp_x16(dsc ? bpp :
> > >                                         intel_dp_output_bpp(crtc_state->output_format, bpp));
> > >



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux