Instead of checking each compressed bpp value against the maximum
DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and
limiting the range of bpps looped over using this maximum.
While at it add a comment about the origin of the DSC/DPT bpp limit.
Bspec: 49259, 68912
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp_mst.c | 45 +++++++++++----------
1 file changed, 23 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 40660dc5edb45..516b00f791420 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -51,27 +51,24 @@
#include "intel_vdsc.h"
#include "skl_scaler.h"
-static int intel_dp_mst_check_constraints(struct drm_i915_private *i915, int bpp,
- const struct drm_display_mode *adjusted_mode,
- struct intel_crtc_state *crtc_state,
- bool dsc)
+static int intel_dp_mst_max_dpt_bpp(const struct intel_crtc_state *crtc_state,
+ bool dsc)
{
- if (intel_dp_is_uhbr(crtc_state) && DISPLAY_VER(i915) < 20 && dsc) {
- int output_bpp = bpp;
- int symbol_clock = intel_dp_link_symbol_clock(crtc_state->port_clock);
- int available_bw = mul_u32_u32(symbol_clock * 72,
- drm_dp_bw_channel_coding_efficiency(true)) /
- 1000000;
+ struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->hw.adjusted_mode;
- if (output_bpp * adjusted_mode->crtc_clock >
- available_bw) {
- drm_dbg_kms(&i915->drm, "UHBR check failed(required bw %d available %d)\n",
- output_bpp * adjusted_mode->crtc_clock, available_bw);
- return -EINVAL;
- }
- }
+ if (!intel_dp_is_uhbr(crtc_state) || DISPLAY_VER(i915) >= 20 || !dsc)
+ return INT_MAX;
- return 0;
+ /*
+ * DSC->DPT interface width:
+ * ICL-MTL: 72 bits (each branch has 72 bits, only left branch is used)
+ * LNL+: 144 bits (not a bottleneck in any config)
+ */
+ return div64_u64(mul_u32_u32(intel_dp_link_symbol_clock(crtc_state->port_clock) * 72,
+ drm_dp_bw_channel_coding_efficiency(true)),
+ mul_u32_u32(adjusted_mode->crtc_clock, 1000000));
}
static int intel_dp_mst_bw_overhead(const struct intel_crtc_state *crtc_state,
@@ -160,6 +157,7 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
const struct drm_display_mode *adjusted_mode =
&crtc_state->hw.adjusted_mode;
int bpp, slots = -EINVAL;
+ int max_dpt_bpp;
int ret = 0;
mst_state = drm_atomic_get_mst_topology_state(state, &intel_dp->mst_mgr);
@@ -180,6 +178,13 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
crtc_state->port_clock,
crtc_state->lane_count);
+ max_dpt_bpp = intel_dp_mst_max_dpt_bpp(crtc_state, dsc);
+ if (max_bpp > max_dpt_bpp) {
+ drm_dbg_kms(&i915->drm, "Limiting bpp to max DPT bpp (%d -> %d)\n",
+ max_bpp, max_dpt_bpp);
+ max_bpp = max_dpt_bpp;
+ }
+
drm_dbg_kms(&i915->drm, "Looking for slots in range min bpp %d max bpp %d\n",
min_bpp, max_bpp);
@@ -191,10 +196,6 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
drm_dbg_kms(&i915->drm, "Trying bpp %d\n", bpp);
- ret = intel_dp_mst_check_constraints(i915, bpp, adjusted_mode, crtc_state, dsc);
- if (ret)
- continue;
-
link_bpp_x16 = to_bpp_x16(dsc ? bpp :
intel_dp_output_bpp(crtc_state->output_format, bpp));
--
2.43.3
