Re: [PATCH 2/3] Start separating pipe vs transcoder set logic for bigjoiner during modeset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 27, 2024 at 06:40:23AM +0200, Srinivas, Vidya wrote:
> 
> 
> > -----Original Message-----
> > From: Lisovskiy, Stanislav <stanislav.lisovskiy@xxxxxxxxx>
> > Sent: Thursday, February 22, 2024 12:50 AM
> > To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > Cc: Lisovskiy, Stanislav <stanislav.lisovskiy@xxxxxxxxx>; Saarinen, Jani
> > <jani.saarinen@xxxxxxxxx>; ville.syrjala@xxxxxxxxxxxxxxx; Srinivas, Vidya
> > <vidya.srinivas@xxxxxxxxx>
> > Subject: [PATCH 2/3] Start separating pipe vs transcoder set logic for bigjoiner
> > during modeset
> > 
> > Handle only bigjoiner masters in skl_commit_modeset_enables/disables,
> > slave crtcs should be handled by master hooks. Same for encoders.
> > That way we can also remove a bunch of checks like
> > intel_crtc_is_bigjoiner_slave.
> > 
> > v2: Get rid of master vs slave checks and separation in crtc enable/disable
> > hooks.
> >     Use unified iteration cycle for all of those, while enabling/disabling
> >     transcoder only for those pipes where its needed(Ville Syrjälä)
> > 
> > v3: Move all the intel_encoder_* calls under transcoder code path(Ville
> > Syrjälä)
> > 
> > v4:  - Call intel_crtc_vblank_on from hsw_crtc_enable only for non-transcoder
> > path
> >        (for master pipe that will be called from
> > intel_encoders_enable/intel_enable_ddi)
> >      - Fix stupid mistake with using crtc->pipe for the mask, instead of BIT(crtc-
> > >pipe)
> > 
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/display/intel_ddi.c     |  21 +--
> >  drivers/gpu/drm/i915/display/intel_display.c | 183 ++++++++++++-------
> >  drivers/gpu/drm/i915/display/intel_display.h |   6 +
> >  3 files changed, 121 insertions(+), 89 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index bea4415902044..6071e9f500871 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -3100,7 +3100,6 @@ static void intel_ddi_post_disable(struct
> > intel_atomic_state *state,
> >  				   const struct drm_connector_state
> > *old_conn_state)  {
> >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > -	struct intel_crtc *slave_crtc;
> > 
> >  	if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST)) {
> >  		intel_crtc_vblank_off(old_crtc_state);
> > @@ -3117,17 +3116,6 @@ static void intel_ddi_post_disable(struct
> > intel_atomic_state *state,
> >  			ilk_pfit_disable(old_crtc_state);
> >  	}
> > 
> > -	for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, slave_crtc,
> > -
> > intel_crtc_bigjoiner_slave_pipes(old_crtc_state)) {
> > -		const struct intel_crtc_state *old_slave_crtc_state =
> > -			intel_atomic_get_old_crtc_state(state, slave_crtc);
> > -
> > -		intel_crtc_vblank_off(old_slave_crtc_state);
> > -
> > -		intel_dsc_disable(old_slave_crtc_state);
> > -		skl_scaler_disable(old_slave_crtc_state);
> > -	}
> > -
> >  	/*
> >  	 * When called from DP MST code:
> >  	 * - old_conn_state will be NULL
> > @@ -3363,8 +3351,7 @@ static void intel_enable_ddi(struct
> > intel_atomic_state *state,  {
> >  	drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder);
> > 
> > -	if (!intel_crtc_is_bigjoiner_slave(crtc_state))
> > -		intel_ddi_enable_transcoder_func(encoder, crtc_state);
> > +	intel_ddi_enable_transcoder_func(encoder, crtc_state);
> > 
> >  	/* Enable/Disable DP2.0 SDP split config before transcoder */
> >  	intel_audio_sdp_split_update(crtc_state);
> > @@ -3469,9 +3456,6 @@ void intel_ddi_update_active_dpll(struct
> > intel_atomic_state *state,
> >  				  struct intel_crtc *crtc)
> >  {
> >  	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > -	struct intel_crtc_state *crtc_state =
> > -		intel_atomic_get_new_crtc_state(state, crtc);
> > -	struct intel_crtc *slave_crtc;
> >  	enum phy phy = intel_port_to_phy(i915, encoder->port);
> > 
> >  	/* FIXME: Add MTL pll_mgr */
> > @@ -3479,9 +3463,6 @@ void intel_ddi_update_active_dpll(struct
> > intel_atomic_state *state,
> >  		return;
> > 
> >  	intel_update_active_dpll(state, crtc, encoder);
> > -	for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc,
> > -
> > intel_crtc_bigjoiner_slave_pipes(crtc_state))
> > -		intel_update_active_dpll(state, slave_crtc, encoder);
> >  }
> > 
> >  static void
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 916c13a149fd5..e1ea53fd6a288 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -1631,31 +1631,12 @@ static void hsw_configure_cpu_transcoder(const
> > struct intel_crtc_state *crtc_sta
> >  	hsw_set_transconf(crtc_state);
> >  }
> > 
> > -static void hsw_crtc_enable(struct intel_atomic_state *state,
> > -			    struct intel_crtc *crtc)
> > +static void hsw_crtc_enable_pre_transcoder(struct intel_atomic_state *state,
> > +					   struct intel_crtc *crtc)
> >  {
> >  	const struct intel_crtc_state *new_crtc_state =
> >  		intel_atomic_get_new_crtc_state(state, crtc);
> >  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > -	enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > -	enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
> > -	bool psl_clkgate_wa;
> > -
> > -	if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > -		return;
> > -
> > -	intel_dmc_enable_pipe(dev_priv, crtc->pipe);
> > -
> > -	if (!new_crtc_state->bigjoiner_pipes) {
> > -		intel_encoders_pre_pll_enable(state, crtc);
> > -
> > -		if (new_crtc_state->shared_dpll)
> > -			intel_enable_shared_dpll(new_crtc_state);
> > -
> > -		intel_encoders_pre_enable(state, crtc);
> > -	} else {
> > -		icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> > -	}
> > 
> >  	intel_dsc_enable(new_crtc_state);
> > 
> > @@ -1665,19 +1646,17 @@ static void hsw_crtc_enable(struct
> > intel_atomic_state *state,
> >  	intel_set_pipe_src_size(new_crtc_state);
> >  	if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> >  		bdw_set_pipe_misc(new_crtc_state);
> > +}
> > 
> > -	if (!intel_crtc_is_bigjoiner_slave(new_crtc_state) &&
> > -	    !transcoder_is_dsi(cpu_transcoder))
> > -		hsw_configure_cpu_transcoder(new_crtc_state);
> > +static void hsw_crtc_enable_post_transcoder(struct intel_atomic_state
> > *state,
> > +					    struct intel_crtc *crtc)
> > +{
> > +	const struct intel_crtc_state *new_crtc_state =
> > +		intel_atomic_get_new_crtc_state(state, crtc);
> > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > 
> >  	crtc->active = true;
> > 
> > -	/* Display WA #1180: WaDisableScalarClockGating: glk */
> > -	psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 &&
> > -		new_crtc_state->pch_pfit.enabled;
> > -	if (psl_clkgate_wa)
> > -		glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
> > -
> >  	if (DISPLAY_VER(dev_priv) >= 9)
> >  		skl_pfit_enable(new_crtc_state);
> >  	else
> > @@ -1700,27 +1679,84 @@ static void hsw_crtc_enable(struct
> > intel_atomic_state *state,
> >  		icl_set_pipe_chicken(new_crtc_state);
> > 
> >  	intel_initial_watermarks(state, crtc);
> > +}
> > 
> > -	if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > -		intel_crtc_vblank_on(new_crtc_state);
> > +static void hsw_crtc_enable(struct intel_atomic_state *state,
> > +			    struct intel_crtc *crtc)
> > +{
> > +	const struct intel_crtc_state *new_crtc_state =
> > +		intel_atomic_get_new_crtc_state(state, crtc);
> > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > +	enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
> > +	struct intel_crtc *_crtc;
> > +	int slave_pipe_mask =
> > intel_crtc_bigjoiner_slave_pipes(new_crtc_state);
> 
> 
> Many thanks for the patch series.
> Should we calculate slave_pipe_mask only if the modeset
> was received on the slave pipe. Else, we noticed that
> each time its traversing through slave pipe even when
> modeset was received on master (say pipe = 1)
> Kindly suggest.

That is exactly how it should happen. For bigjoiner if we get a modeset
on master pipe, we traverse both master and its slaves.
That is how bigjoiner is supposed to work.

> 
> > +	int pipe_mask = slave_pipe_mask | BIT(crtc->pipe);
> > +	bool psl_clkgate_wa;
> > +	enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > 
> > -	intel_encoders_enable(state, crtc);
> > +	if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > +		return;
> > 
> > -	if (psl_clkgate_wa) {
> > -		intel_crtc_wait_for_next_vblank(crtc);
> > -		glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false);
> > -	}
> > +	/*
> > +	 * Use reverse iterator to go through slave pipes first.
> > +	 * TODO: We might need smarter iterator here
> > +	 */
> > +	for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, _crtc,
> > +						 pipe_mask) {
> > +		const struct intel_crtc_state *_new_crtc_state =
> > +			intel_atomic_get_new_crtc_state(state, _crtc);
> > +		bool needs_transcoder = ((slave_pipe_mask & BIT(_crtc-
> > >pipe)) == 0) &&
> > +					!transcoder_is_dsi(cpu_transcoder);
> > +
> > +		intel_dmc_enable_pipe(dev_priv, crtc->pipe);
> > +
> > +		if (!new_crtc_state->bigjoiner_pipes) {
> > +			if (needs_transcoder)
> > +				intel_encoders_pre_pll_enable(state, crtc);
> 
> 
> Should we use _crtc here. In remaining places in this function also.
> Kindly suggest.

Yes, you are right. Even though it doesn't hurt currently, because we call
this only for master so crtc is guaranteed to be the one which needs to
follow the transcoder path.

> 
> > +
> > +			if (new_crtc_state->shared_dpll)
> > +				intel_enable_shared_dpll(new_crtc_state);
> > +
> > +			if (needs_transcoder)
> > +				intel_encoders_pre_enable(state, crtc);
> > +		} else {
> > +			icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> > +		}
> > +
> > +		hsw_crtc_enable_pre_transcoder(state, _crtc);
> > +
> > +		if (needs_transcoder)
> > +			hsw_configure_cpu_transcoder(_new_crtc_state);
> > +
> > +		/* Display WA #1180: WaDisableScalarClockGating: glk */
> > +		psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 &&
> > +			new_crtc_state->pch_pfit.enabled;
> > +		if (psl_clkgate_wa)
> > +			glk_pipe_scaler_clock_gating_wa(dev_priv, pipe,
> > true);
> > +
> > +		hsw_crtc_enable_post_transcoder(state, _crtc);
> > +
> > +		if (needs_transcoder)
> > +			intel_encoders_enable(state, crtc);
> > +		else
> > +			intel_crtc_vblank_on(_new_crtc_state);
> > +
> > +		if (psl_clkgate_wa) {
> > +			intel_crtc_wait_for_next_vblank(crtc);
> > +			glk_pipe_scaler_clock_gating_wa(dev_priv, pipe,
> > false);
> > +		}
> > 
> > -	/* If we change the relative order between pipe/planes enabling, we
> > need
> > -	 * to change the workaround. */
> > -	hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe;
> > -	if (IS_HASWELL(dev_priv) && hsw_workaround_pipe !=
> > INVALID_PIPE) {
> > -		struct intel_crtc *wa_crtc;
> > +		/* If we change the relative order between pipe/planes
> > enabling, we need
> > +		 * to change the workaround. */
> > +		hsw_workaround_pipe = new_crtc_state-
> > >hsw_workaround_pipe;
> > +		if (IS_HASWELL(dev_priv) && hsw_workaround_pipe !=
> > INVALID_PIPE) {
> > +			struct intel_crtc *wa_crtc;
> > 
> > -		wa_crtc = intel_crtc_for_pipe(dev_priv,
> > hsw_workaround_pipe);
> > +			wa_crtc = intel_crtc_for_pipe(dev_priv,
> > hsw_workaround_pipe);
> > 
> > -		intel_crtc_wait_for_next_vblank(wa_crtc);
> > -		intel_crtc_wait_for_next_vblank(wa_crtc);
> > +			intel_crtc_wait_for_next_vblank(wa_crtc);
> > +			intel_crtc_wait_for_next_vblank(wa_crtc);
> > +		}
> >  	}
> >  }
> > 
> > @@ -1784,28 +1820,27 @@ static void hsw_crtc_disable(struct
> > intel_atomic_state *state,
> >  	const struct intel_crtc_state *old_crtc_state =
> >  		intel_atomic_get_old_crtc_state(state, crtc);
> >  	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> > +	int slave_pipe_mask =
> > intel_crtc_bigjoiner_slave_pipes(old_crtc_state);
> > +	int pipe_mask = slave_pipe_mask | BIT(crtc->pipe);
> > +	struct intel_crtc *_crtc;
> > +
> > +	for_each_intel_crtc_in_pipe_mask(&i915->drm, _crtc,
> > +					 pipe_mask) {
> > +		const struct intel_crtc_state *_old_crtc_state =
> > +			intel_atomic_get_old_crtc_state(state, _crtc);
> > +		bool needs_encoder_disable = (slave_pipe_mask & BIT(_crtc-
> > >pipe)) ==
> > +0;
> > +
> > +		if (needs_encoder_disable) {
> > +			intel_encoders_disable(state, _crtc);
> > +			intel_encoders_post_disable(state, _crtc);
> > +		}
> > 
> > -	/*
> > -	 * FIXME collapse everything to one hook.
> > -	 * Need care with mst->ddi interactions.
> > -	 */
> > -	if (!intel_crtc_is_bigjoiner_slave(old_crtc_state)) {
> > -		intel_encoders_disable(state, crtc);
> > -		intel_encoders_post_disable(state, crtc);
> > -	}
> > -
> > -	intel_disable_shared_dpll(old_crtc_state);
> > -
> > -	if (!intel_crtc_is_bigjoiner_slave(old_crtc_state)) {
> > -		struct intel_crtc *slave_crtc;
> > -
> > -		intel_encoders_post_pll_disable(state, crtc);
> > +		intel_disable_shared_dpll(_old_crtc_state);
> > 
> > -		intel_dmc_disable_pipe(i915, crtc->pipe);
> > +		if (needs_encoder_disable)
> > +			intel_encoders_post_pll_disable(state, _crtc);
> > 
> > -		for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc,
> > -
> > intel_crtc_bigjoiner_slave_pipes(old_crtc_state))
> > -			intel_dmc_disable_pipe(i915, slave_crtc->pipe);
> > +		intel_dmc_disable_pipe(i915, _crtc->pipe);
> >  	}
> >  }
> > 
> > @@ -6788,8 +6823,10 @@ static void intel_commit_modeset_disables(struct
> > intel_atomic_state *state)
> >  		 * Slave vblanks are masked till Master Vblanks.
> >  		 */
> >  		if (!is_trans_port_sync_slave(old_crtc_state) &&
> > -		    !intel_dp_mst_is_slave_trans(old_crtc_state) &&
> > -		    !intel_crtc_is_bigjoiner_slave(old_crtc_state))
> > +		    !intel_dp_mst_is_slave_trans(old_crtc_state))
> > +			continue;
> > +
> > +		if (intel_crtc_is_bigjoiner_slave(old_crtc_state))
> >  			continue;
> 
> Should we use !intel_crtc_is_bigjoiner_slave here?
> Kindly suggest.

No. The main idea of that whole refactoring is that we never do anything for
slave pipes in *commit_modeset_disables/enables. Those are intentionally skipped
and handled from master pipes. In bigjoiner slave pipes are no longer independent.
So if we detect that pipe is the slave pipe with a check above - we skip it.

> 
> > 
> >  		intel_old_crtc_state_disables(state, old_crtc_state, @@ -
> > 6807,6 +6844,9 @@ static void intel_commit_modeset_disables(struct
> > intel_atomic_state *state)
> >  		if (!old_crtc_state->hw.active)
> >  			continue;
> > 
> > +		if (intel_crtc_is_bigjoiner_slave(old_crtc_state))
> > +			continue;
> > +
> >  		intel_old_crtc_state_disables(state, old_crtc_state,
> >  					      new_crtc_state, crtc);
> >  	}
> > @@ -6919,8 +6959,10 @@ static void skl_commit_modeset_enables(struct
> > intel_atomic_state *state)
> >  			continue;
> > 
> >  		if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
> > -		    is_trans_port_sync_master(new_crtc_state) ||
> > -		    intel_crtc_is_bigjoiner_master(new_crtc_state))
> > +		    is_trans_port_sync_master(new_crtc_state))
> > +			continue;
> > +
> > +		if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> >  			continue;
> > 
> Should we use !intel_crtc_is_bigjoiner_master here?
> Kindly suggest.

See above. We handle here only master pipes and skip slave pipes here.

> 
> >  		modeset_pipes &= ~BIT(pipe);
> > @@ -6930,7 +6972,7 @@ static void skl_commit_modeset_enables(struct
> > intel_atomic_state *state)
> > 
> >  	/*
> >  	 * Then we enable all remaining pipes that depend on other
> > -	 * pipes: MST slaves and port sync masters, big joiner master
> > +	 * pipes: MST slaves and port sync masters
> >  	 */
> >  	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> >  		enum pipe pipe = crtc->pipe;
> > @@ -6938,6 +6980,9 @@ static void skl_commit_modeset_enables(struct
> > intel_atomic_state *state)
> >  		if ((modeset_pipes & BIT(pipe)) == 0)
> >  			continue;
> > 
> > +		if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > +			continue;
> > +
> >  		modeset_pipes &= ~BIT(pipe);
> > 
> >  		intel_enable_crtc(state, crtc);
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h
> > b/drivers/gpu/drm/i915/display/intel_display.h
> > index f4a0773f0fca8..e1e8d956c305e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -280,6 +280,12 @@ enum phy_fia {
> >  			    base.head)					\
> >  		for_each_if((pipe_mask) & BIT(intel_crtc->pipe))
> > 
> > +#define for_each_intel_crtc_in_pipe_mask_reverse(dev, intel_crtc,
> > pipe_mask)	\
> > +	list_for_each_entry_reverse(intel_crtc,
> > 	\
> > +				    &(dev)->mode_config.crtc_list,
> > 	\
> > +				    base.head)
> > 	\
> > +		for_each_if((pipe_mask) & BIT(intel_crtc->pipe))
> > +
> >  #define for_each_intel_encoder(dev, intel_encoder)		\
> >  	list_for_each_entry(intel_encoder,			\
> >  			    &(dev)->mode_config.encoder_list,	\
> > --
> > 2.37.3
> 



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux