RE: [PATCH 3/3] drm/i915: Fix bigjoiner case for DP2.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Lisovskiy, Stanislav <stanislav.lisovskiy@xxxxxxxxx>
> Sent: Tuesday, February 27, 2024 2:34 PM
> To: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Saarinen, Jani <jani.saarinen@xxxxxxxxx>;
> ville.syrjala@xxxxxxxxxxxxxxx; Srinivas, Vidya <vidya.srinivas@xxxxxxxxx>
> Subject: Re: [PATCH 3/3] drm/i915: Fix bigjoiner case for DP2.0
> 
> On Mon, Feb 26, 2024 at 09:56:10PM +0200, Jani Nikula wrote:
> > On Wed, 21 Feb 2024, Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> wrote:
> > > Patch calculates bigjoiner pipes in mst compute.
> > > Patch also passes bigjoiner bool to validate plane max size.
> >
> > Please use the imperative mood in commit messages, e.g. "calculate"
> > intead of "calculates".
> >
> > Please do not refer to "patch". We know it's a patch, until it isn't,
> > and then it's a commit.
> >
> > Please explain *why* the changes are being done, not just *what* is
> > being done.
> >
> > In the subject, what is "bigjoiner case for DP2.0"? DP 2.0 is a spec
> > version, and as such irrelevant for the changes being done.
> >
> > > Signed-off-by: vsrini4 <vidya.srinivas@xxxxxxxxx>
> >
> > ?
> 
> Hi Jani, I just added that patch from Vidya to my series, to be honest, didn't
> have time at all to look much into it.
> Looks like its me who is going to fix that.

Hello Stan
My sincere apologies. I dint want to disturb your series, so I did not fix it.
Please let me know if I should fix it. Sorry again.
Thank you Jani for the comments.

Regards
Vidya
> 
> >
> > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_dp_mst.c | 19
> > > ++++++++++++-------
> > >  1 file changed, 12 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > index 5307ddd4edcf5..fd27d9976c050 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > @@ -523,6 +523,7 @@ static int intel_dp_mst_compute_config(struct
> intel_encoder *encoder,
> > >  				       struct drm_connector_state *conn_state)
> {
> > >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
> > >  	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
> > >  	struct intel_dp *intel_dp = &intel_mst->primary->dp;
> > >  	const struct intel_connector *connector = @@ -540,6 +541,10 @@
> > > static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
> > >  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
> > >  		return -EINVAL;
> > >
> > > +	if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
> > > +				    adjusted_mode->crtc_clock))
> > > +		pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1,
> > > +crtc->pipe);
> > > +
> > >  	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
> > >  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> > >  	pipe_config->has_pch_encoder = false; @@ -1318,12 +1323,6 @@
> > > intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
> > >  	 *   corresponding link capabilities of the sink) in case the
> > >  	 *   stream is uncompressed for it by the last branch device.
> > >  	 */
> > > -	if (mode_rate > max_rate || mode->clock > max_dotclk ||
> > > -	    drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port-
> >full_pbn) {
> > > -		*status = MODE_CLOCK_HIGH;
> > > -		return 0;
> > > -	}
> > > -
> > >  	if (mode->clock < 10000) {
> > >  		*status = MODE_CLOCK_LOW;
> > >  		return 0;
> > > @@ -1343,6 +1342,12 @@ intel_dp_mst_mode_valid_ctx(struct
> drm_connector *connector,
> > >  		return 0;
> > >  	}
> > >
> > > +	if (mode_rate > max_rate || mode->clock > max_dotclk ||
> > > +	    drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port-
> >full_pbn) {
> > > +		*status = MODE_CLOCK_HIGH;
> > > +		return 0;
> > > +	}
> > > +
> > >  	if (DISPLAY_VER(dev_priv) >= 10 &&
> > >  	    drm_dp_sink_supports_dsc(intel_connector->dp.dsc_dpcd)) {
> > >  		/*
> > > @@ -1385,7 +1390,7 @@ intel_dp_mst_mode_valid_ctx(struct
> drm_connector *connector,
> > >  		return 0;
> > >  	}
> > >
> > > -	*status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
> > > +	*status = intel_mode_valid_max_plane_size(dev_priv, mode,
> > > +bigjoiner);
> > >  	return 0;
> > >  }
> >
> > --
> > Jani Nikula, Intel




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux