Re: [PATCH] drm/i915/vlv: hack to init backlight regs if BIOS fails to do so v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 26, 2013 at 09:53:29AM +0200, Daniel Vetter wrote:
> On Wed, Sep 25, 2013 at 02:04:32PM -0700, Jesse Barnes wrote:
> > Still digging up the actual VBT info for this, but wanted to get this
> > out there for testing, or in case others are also bugged by this.
> > 
> > This can happen if you boot with an external display connected.  In that
> > case, the attached eDP backlight modulation frequency may not be
> > programmed, so we need to use something (in this case the value my BIOS
> > normally programs with just the internal display enabled).
> > 
> > v2: fix masking and magic value in read_blc_pwm_ctl (Jani)
> > 
> > Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
> 
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67732
> Tested-by: shui yangwei <yangweix.shui@xxxxxxxxx> (v1)

Queued for -next with Jani's irc-r-b, thanks for the patch.
-Daniel
> 
> > ---
> >  drivers/gpu/drm/i915/intel_panel.c | 17 +++++++++++++++++
> >  1 file changed, 17 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> > index 8f025c6..5468416 100644
> > --- a/drivers/gpu/drm/i915/intel_panel.c
> > +++ b/drivers/gpu/drm/i915/intel_panel.c
> > @@ -372,6 +372,9 @@ static u32 i915_read_blc_pwm_ctl(struct drm_device *dev)
> >  				I915_WRITE(BLC_PWM_CTL2,
> >  					   dev_priv->regfile.saveBLC_PWM_CTL2);
> >  		}
> > +
> > +		if (IS_VALLEYVIEW(dev) && !val)
> > +			val = 0x0f42ffff;
> >  	}
> >  
> >  	return val;
> > @@ -629,10 +632,24 @@ set_level:
> >  	spin_unlock_irqrestore(&dev_priv->backlight.lock, flags);
> >  }
> >  
> > +/* FIXME: use VBT vals to init PWM_CTL and PWM_CTL2 correctly */
> > +static void intel_panel_init_backlight_regs(struct drm_device *dev)
> > +{
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +
> > +	if (IS_VALLEYVIEW(dev)) {
> > +		u32 cur_val = I915_READ(BLC_PWM_CTL) &
> > +			BACKLIGHT_DUTY_CYCLE_MASK;
> > +		I915_WRITE(BLC_PWM_CTL, (0xf42 << 16) | cur_val);
> > +	}
> > +}
> > +
> >  static void intel_panel_init_backlight(struct drm_device *dev)
> >  {
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> >  
> > +	intel_panel_init_backlight_regs(dev);
> > +
> >  	dev_priv->backlight.level = intel_panel_get_backlight(dev);
> >  	dev_priv->backlight.enabled = dev_priv->backlight.level != 0;
> >  }
> > -- 
> > 1.8.3.1
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux