Re: [PATCH 5/6] drm/i915/pmu: Prepare for multi-tile non-engine counters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/05/2023 21:57, Umesh Nerlige Ramappa wrote:
On Fri, May 12, 2023 at 11:56:18AM +0100, Tvrtko Ursulin wrote:

On 12/05/2023 02:08, Dixit, Ashutosh wrote:
On Fri, 05 May 2023 17:58:15 -0700, Umesh Nerlige Ramappa wrote:

From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>

Reserve some bits in the counter config namespace which will carry the
tile id and prepare the code to handle this.

No per tile counters have been added yet.

v2:
- Fix checkpatch issues
- Use 4 bits for gt id in non-engine counters. Drop FIXME.
- Set MAX GTs to 4. Drop FIXME.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>

8<

+static u64 frequency_enabled_mask(void)
+{
+    unsigned int i;
+    u64 mask = 0;
+
+    for (i = 0; i < I915_PMU_MAX_GTS; i++)
+        mask |= config_mask(__I915_PMU_ACTUAL_FREQUENCY(i)) |
+            config_mask(__I915_PMU_REQUESTED_FREQUENCY(i));
+
+    return mask;
+}
+
 static bool pmu_needs_timer(struct i915_pmu *pmu, bool gpu_active)
 {
    struct drm_i915_private *i915 = container_of(pmu, typeof(*i915), pmu); @@ -120,9 +147,7 @@ static bool pmu_needs_timer(struct i915_pmu *pmu, bool gpu_active)
     * Mask out all the ones which do not need the timer, or in
     * other words keep all the ones that could need the timer.
     */
-    enable &= config_mask(I915_PMU_ACTUAL_FREQUENCY) |
-          config_mask(I915_PMU_REQUESTED_FREQUENCY) |
-          ENGINE_SAMPLE_MASK;
+    enable &= frequency_enabled_mask() | ENGINE_SAMPLE_MASK;

u32 enable & u64 frequency_enabled_mask

ugly but ok I guess? Or change enable to u64?

making pmu->enable u64 as well as other places where it is assigned to local variables.


Hmm.. yes very ugly. Could have been an accident which happened to work because there is a single timer (not per tile).

Happened to work because the frequency mask does not spill over to the upper 32 bits (even for multi tile).

--------------------- START_SECTION ----------------

Similar issue in frequency_sampling_enabled too. Gt_id argument to it seems pointless.

Not sure why it's pointless. We need the gt_id to determine the right mask for that specific gt. If it's not enabled, then we just return without pm_get and async put (like you mention later).
And this piece of code is called within for_each_gt.

I think I got a little confused cross referencing the code and patches last week and did not mentally see all the changes.

Because the hunk in other_bit() is correctly adding support for per gt bits.

The layout of pmu->enable ends up like this:

bits  0 -  2: engine events
bits  3 -  5: gt0 other events
bits  6 -  8: gt1 other events
bits  9 - 11: gt2 other events
bits 12 - 14: gt3 other events

So I now think whole frequency_enabled_mask() is just pointless and should be removed. And then pmu_needs_time code can stay as is. Possibly add a config_mask_32 helper which ensures no bits in upper 32 bits are returned.

That is if we are happy for the frequency_sampling_enabled returning true for all gts, regardless of which ones actually have frequency sampling enabled.

Or if we want to implement it as I probably have intended, we will need to add some gt bits into pmu->enable. Maybe reserve top four same as with config counters.

Nope. What you have here works just fine. pmu->enable should not include any gt id info. gt_id[63:60] is only a concept for pmu config sent by user.  config_mask and pmu->enable are i915 internal bookkeeping (bit masks) just to track what events need to be sampled.  The 'other' bit masks are a function of gt_id because we use gt_id to calculate a contiguous numerical value for these 'other' events. That's all. Once the numerical value is calculated, there is no need for gt_id because config_mask is BIT_ULL(numerical_value). Since the numerical values never exceeded 31 (even for multi-gts), everything worked even with 32 bit pmu->enable.

Yep.

So question then is why make pmu->enable u64?

Instead frequency_enabled_mask() should be made u32 since the bitwise or composition of config_masks() is guaranteed to fit.

At most it can have an internal u64 for the mask, assert upper_32_bits are zero and return lower_32_bits.

Did I get it right this time round? :)

Regards,

Tvrtko



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux