Re: [PATCH 5/6] drm/i915/pmu: Prepare for multi-tile non-engine counters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 05 May 2023 17:58:15 -0700, Umesh Nerlige Ramappa wrote:
>
> From: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
>
> Reserve some bits in the counter config namespace which will carry the
> tile id and prepare the code to handle this.
>
> No per tile counters have been added yet.
>
> v2:
> - Fix checkpatch issues
> - Use 4 bits for gt id in non-engine counters. Drop FIXME.
> - Set MAX GTs to 4. Drop FIXME.
>
> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_pmu.c | 150 +++++++++++++++++++++++---------
>  drivers/gpu/drm/i915/i915_pmu.h |   9 +-
>  include/uapi/drm/i915_drm.h     |  17 +++-
>  3 files changed, 129 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c
> index 669a42e44082..12b2f3169abf 100644
> --- a/drivers/gpu/drm/i915/i915_pmu.c
> +++ b/drivers/gpu/drm/i915/i915_pmu.c
> @@ -56,11 +56,21 @@ static bool is_engine_config(u64 config)
>	return config < __I915_PMU_OTHER(0);
>  }
>
> +static unsigned int config_gt_id(const u64 config)
> +{
> +	return config >> __I915_PMU_GT_SHIFT;
> +}
> +
> +static u64 config_counter(const u64 config)
> +{
> +	return config & ~(~0ULL << __I915_PMU_GT_SHIFT);

ok, but another possibility:

	return config & ~REG_GENMASK64(63, __I915_PMU_GT_SHIFT);

> +}
> +
>  static unsigned int other_bit(const u64 config)
>  {
>	unsigned int val;
>
> -	switch (config) {
> +	switch (config_counter(config)) {
>	case I915_PMU_ACTUAL_FREQUENCY:
>		val =  __I915_PMU_ACTUAL_FREQUENCY_ENABLED;
>		break;
> @@ -78,15 +88,20 @@ static unsigned int other_bit(const u64 config)
>		return -1;
>	}
>
> -	return I915_ENGINE_SAMPLE_COUNT + val;
> +	return I915_ENGINE_SAMPLE_COUNT +
> +	       config_gt_id(config) * __I915_PMU_TRACKED_EVENT_COUNT +
> +	       val;
>  }
>
>  static unsigned int config_bit(const u64 config)
>  {
> -	if (is_engine_config(config))
> +	if (is_engine_config(config)) {
> +		GEM_BUG_ON(config_gt_id(config));

This GEM_BUG_ON is not needed since:

	static bool is_engine_config(u64 config)
	{
	        return config < __I915_PMU_OTHER(0);
	}

> +
>		return engine_config_sample(config);
> -	else
> +	} else {
>		return other_bit(config);
> +	}
>  }
>
>  static u64 config_mask(u64 config)
> @@ -104,6 +119,18 @@ static unsigned int event_bit(struct perf_event *event)
>	return config_bit(event->attr.config);
>  }
>
> +static u64 frequency_enabled_mask(void)
> +{
> +	unsigned int i;
> +	u64 mask = 0;
> +
> +	for (i = 0; i < I915_PMU_MAX_GTS; i++)
> +		mask |= config_mask(__I915_PMU_ACTUAL_FREQUENCY(i)) |
> +			config_mask(__I915_PMU_REQUESTED_FREQUENCY(i));
> +
> +	return mask;
> +}
> +
>  static bool pmu_needs_timer(struct i915_pmu *pmu, bool gpu_active)
>  {
>	struct drm_i915_private *i915 = container_of(pmu, typeof(*i915), pmu);
> @@ -120,9 +147,7 @@ static bool pmu_needs_timer(struct i915_pmu *pmu, bool gpu_active)
>	 * Mask out all the ones which do not need the timer, or in
>	 * other words keep all the ones that could need the timer.
>	 */
> -	enable &= config_mask(I915_PMU_ACTUAL_FREQUENCY) |
> -		  config_mask(I915_PMU_REQUESTED_FREQUENCY) |
> -		  ENGINE_SAMPLE_MASK;
> +	enable &= frequency_enabled_mask() | ENGINE_SAMPLE_MASK;

u32 enable & u64 frequency_enabled_mask

ugly but ok I guess? Or change enable to u64?

>
>	/*
>	 * When the GPU is idle per-engine counters do not need to be
> @@ -164,9 +189,37 @@ static inline s64 ktime_since_raw(const ktime_t kt)
>	return ktime_to_ns(ktime_sub(ktime_get_raw(), kt));
>  }
>
> +static unsigned int
> +__sample_idx(struct i915_pmu *pmu, unsigned int gt_id, int sample)
> +{
> +	unsigned int idx = gt_id * __I915_NUM_PMU_SAMPLERS + sample;
> +
> +	GEM_BUG_ON(idx >= ARRAY_SIZE(pmu->sample));

Does this GEM_BUG_ON need to be split up as follows:

	GEM_BUG_ON(gt_id >= I915_PMU_MAX_GTS);
	GEM_BUG_ON(sample >= __I915_NUM_PMU_SAMPLERS);

Since that is what we really mean here isn't it?

> +
> +	return idx;
> +}
> +
> +static u64 read_sample(struct i915_pmu *pmu, unsigned int gt_id, int sample)
> +{
> +	return pmu->sample[__sample_idx(pmu, gt_id, sample)].cur;
> +}
> +
> +static void
> +store_sample(struct i915_pmu *pmu, unsigned int gt_id, int sample, u64 val)
> +{
> +	pmu->sample[__sample_idx(pmu, gt_id, sample)].cur = val;
> +}
> +
> +static void
> +add_sample_mult(struct i915_pmu *pmu, unsigned int gt_id, int sample, u32 val, u32 mul)
> +{
> +	pmu->sample[__sample_idx(pmu, gt_id, sample)].cur += mul_u32_u32(val, mul);
> +}

Gripe: I think this code should have per event data structures which store
all information about a particular event. Rather than storing it in these
arrays common to all events (and in bit-fields common to all events) which
results in the kind of dance we have to do here. Anyway too big a change to
make now but something to consider if we ever do this for xe.

> +
>  static u64 get_rc6(struct intel_gt *gt)
>  {
>	struct drm_i915_private *i915 = gt->i915;
> +	const unsigned int gt_id = gt->info.id;
>	struct i915_pmu *pmu = &i915->pmu;
>	unsigned long flags;
>	bool awake = false;
> @@ -181,7 +234,7 @@ static u64 get_rc6(struct intel_gt *gt)
>	spin_lock_irqsave(&pmu->lock, flags);
>
>	if (awake) {
> -		pmu->sample[__I915_SAMPLE_RC6].cur = val;
> +		store_sample(pmu, gt_id, __I915_SAMPLE_RC6, val);
>	} else {
>		/*
>		 * We think we are runtime suspended.
> @@ -190,14 +243,14 @@ static u64 get_rc6(struct intel_gt *gt)
>		 * on top of the last known real value, as the approximated RC6
>		 * counter value.
>		 */
> -		val = ktime_since_raw(pmu->sleep_last);
> -		val += pmu->sample[__I915_SAMPLE_RC6].cur;
> +		val = ktime_since_raw(pmu->sleep_last[gt_id]);
> +		val += read_sample(pmu, gt_id, __I915_SAMPLE_RC6);
>	}
>
> -	if (val < pmu->sample[__I915_SAMPLE_RC6_LAST_REPORTED].cur)
> -		val = pmu->sample[__I915_SAMPLE_RC6_LAST_REPORTED].cur;
> +	if (val < read_sample(pmu, gt_id, __I915_SAMPLE_RC6_LAST_REPORTED))
> +		val = read_sample(pmu, gt_id, __I915_SAMPLE_RC6_LAST_REPORTED);
>	else
> -		pmu->sample[__I915_SAMPLE_RC6_LAST_REPORTED].cur = val;
> +		store_sample(pmu, gt_id, __I915_SAMPLE_RC6_LAST_REPORTED, val);
>
>	spin_unlock_irqrestore(&pmu->lock, flags);
>
> @@ -207,13 +260,20 @@ static u64 get_rc6(struct intel_gt *gt)
>  static void init_rc6(struct i915_pmu *pmu)
>  {
>	struct drm_i915_private *i915 = container_of(pmu, typeof(*i915), pmu);
> -	intel_wakeref_t wakeref;
> +	struct intel_gt *gt;
> +	unsigned int i;
> +
> +	for_each_gt(gt, i915, i) {
> +		intel_wakeref_t wakeref;
>
> -	with_intel_runtime_pm(to_gt(i915)->uncore->rpm, wakeref) {
> -		pmu->sample[__I915_SAMPLE_RC6].cur = __get_rc6(to_gt(i915));
> -		pmu->sample[__I915_SAMPLE_RC6_LAST_REPORTED].cur =
> -					pmu->sample[__I915_SAMPLE_RC6].cur;
> -		pmu->sleep_last = ktime_get_raw();
> +		with_intel_runtime_pm(gt->uncore->rpm, wakeref) {
> +			u64 val = __get_rc6(gt);
> +
> +			store_sample(pmu, i, __I915_SAMPLE_RC6, val);
> +			store_sample(pmu, i, __I915_SAMPLE_RC6_LAST_REPORTED,
> +				     val);
> +			pmu->sleep_last[i] = ktime_get_raw();
> +		}
>	}
>  }
>
> @@ -221,8 +281,8 @@ static void park_rc6(struct intel_gt *gt)
>  {
>	struct i915_pmu *pmu = &gt->i915->pmu;
>
> -	pmu->sample[__I915_SAMPLE_RC6].cur = __get_rc6(gt);
> -	pmu->sleep_last = ktime_get_raw();
> +	store_sample(pmu, gt->info.id, __I915_SAMPLE_RC6, __get_rc6(gt));
> +	pmu->sleep_last[gt->info.id] = ktime_get_raw();
>  }
>
>  static void __i915_pmu_maybe_start_timer(struct i915_pmu *pmu)
> @@ -362,34 +422,30 @@ engines_sample(struct intel_gt *gt, unsigned int period_ns)
>	}
>  }
>
> -static void
> -add_sample_mult(struct i915_pmu_sample *sample, u32 val, u32 mul)
> -{
> -	sample->cur += mul_u32_u32(val, mul);
> -}
> -
> -static bool frequency_sampling_enabled(struct i915_pmu *pmu)
> +static bool
> +frequency_sampling_enabled(struct i915_pmu *pmu, unsigned int gt)
>  {
>	return pmu->enable &
> -	       (config_mask(I915_PMU_ACTUAL_FREQUENCY) |
> -		config_mask(I915_PMU_REQUESTED_FREQUENCY));
> +	       (config_mask(__I915_PMU_ACTUAL_FREQUENCY(gt)) |
> +		config_mask(__I915_PMU_REQUESTED_FREQUENCY(gt)));

Here again:

	u32 pmu->enable & u64 config_mask

Probably ok?

And also in i915_pmu_enable() we have:

	pmu->enable |= BIT_ULL(bit);

So change pmu->enable to u64?

>  }
>
>  static void
>  frequency_sample(struct intel_gt *gt, unsigned int period_ns)
>  {
>	struct drm_i915_private *i915 = gt->i915;
> +	const unsigned int gt_id = gt->info.id;
>	struct i915_pmu *pmu = &i915->pmu;
>	struct intel_rps *rps = &gt->rps;
>
> -	if (!frequency_sampling_enabled(pmu))
> +	if (!frequency_sampling_enabled(pmu, gt_id))
>		return;

Pre-existing issue, but why do we need this check? This is already checked
in the two individual checks for actual and requested freq below:

	if (pmu->enable & config_mask(__I915_PMU_ACTUAL_FREQUENCY(gt_id)))

	and

	if (pmu->enable & config_mask(__I915_PMU_REQUESTED_FREQUENCY(gt_id))) 

So can we delete frequency_sampling_enabled()? Or is it there to avoid the
overhead of intel_gt_pm_get_if_awake() (which doesn't seem to be much)?

>
>	/* Report 0/0 (actual/requested) frequency while parked. */
>	if (!intel_gt_pm_get_if_awake(gt))
>		return;
>
> -	if (pmu->enable & config_mask(I915_PMU_ACTUAL_FREQUENCY)) {
> +	if (pmu->enable & config_mask(__I915_PMU_ACTUAL_FREQUENCY(gt_id))) {
>		u32 val;
>
>		/*
> @@ -405,12 +461,12 @@ frequency_sample(struct intel_gt *gt, unsigned int period_ns)
>		if (!val)
>			val = intel_gpu_freq(rps, rps->cur_freq);
>
> -		add_sample_mult(&pmu->sample[__I915_SAMPLE_FREQ_ACT],
> +		add_sample_mult(pmu, gt_id, __I915_SAMPLE_FREQ_ACT,
>				val, period_ns / 1000);
>	}
>
> -	if (pmu->enable & config_mask(I915_PMU_REQUESTED_FREQUENCY)) {
> -		add_sample_mult(&pmu->sample[__I915_SAMPLE_FREQ_REQ],
> +	if (pmu->enable & config_mask(__I915_PMU_REQUESTED_FREQUENCY(gt_id))) {
> +		add_sample_mult(pmu, gt_id, __I915_SAMPLE_FREQ_REQ,
>				intel_rps_get_requested_frequency(rps),
>				period_ns / 1000);
>	}
> @@ -447,9 +503,7 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)
>			continue;
>
>		engines_sample(gt, period_ns);
> -
> -		if (i == 0) /* FIXME */
> -			frequency_sample(gt, period_ns);
> +		frequency_sample(gt, period_ns);
>	}
>
>	hrtimer_forward(hrtimer, now, ns_to_ktime(PERIOD));
> @@ -491,7 +545,12 @@ config_status(struct drm_i915_private *i915, u64 config)
>  {
>	struct intel_gt *gt = to_gt(i915);
>
> -	switch (config) {
> +	unsigned int gt_id = config_gt_id(config);
> +
> +	if (gt_id)
> +		return -ENOENT;

This is just wrong. It is fixed in the next patch:

	if (gt_id > max_gt_id)
		return -ENOENT;

But probably should be fixed in this patch itself. Or dropped from this
patch and let it come in in Patch 6, since it's confusing. Though it
probably belongs in this patch.

> +
> +	switch (config_counter(config)) {
>	case I915_PMU_ACTUAL_FREQUENCY:
>		if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915))
>			/* Requires a mutex for sampling! */
> @@ -599,22 +658,27 @@ static u64 __i915_pmu_event_read(struct perf_event *event)
>			val = engine->pmu.sample[sample].cur;
>		}
>	} else {
> -		switch (event->attr.config) {
> +		const unsigned int gt_id = config_gt_id(event->attr.config);
> +		const u64 config = config_counter(event->attr.config);
> +
> +		switch (config) {
>		case I915_PMU_ACTUAL_FREQUENCY:
>			val =
> -			   div_u64(pmu->sample[__I915_SAMPLE_FREQ_ACT].cur,
> +			   div_u64(read_sample(pmu, gt_id,
> +					       __I915_SAMPLE_FREQ_ACT),
>				   USEC_PER_SEC /* to MHz */);
>			break;
>		case I915_PMU_REQUESTED_FREQUENCY:
>			val =
> -			   div_u64(pmu->sample[__I915_SAMPLE_FREQ_REQ].cur,
> +			   div_u64(read_sample(pmu, gt_id,
> +					       __I915_SAMPLE_FREQ_REQ),
>				   USEC_PER_SEC /* to MHz */);
>			break;
>		case I915_PMU_INTERRUPTS:
>			val = READ_ONCE(pmu->irq_count);
>			break;
>		case I915_PMU_RC6_RESIDENCY:
> -			val = get_rc6(to_gt(i915));
> +			val = get_rc6(i915->gt[gt_id]);
>			break;
>		case I915_PMU_SOFTWARE_GT_AWAKE_TIME:
>			val = ktime_to_ns(intel_gt_get_awake_time(to_gt(i915)));
> diff --git a/drivers/gpu/drm/i915/i915_pmu.h b/drivers/gpu/drm/i915/i915_pmu.h
> index 3a811266ac6a..d47846f21ddf 100644
> --- a/drivers/gpu/drm/i915/i915_pmu.h
> +++ b/drivers/gpu/drm/i915/i915_pmu.h
> @@ -38,13 +38,16 @@ enum {
>	__I915_NUM_PMU_SAMPLERS
>  };
>
> +#define I915_PMU_MAX_GTS (4)

4 or (4)? :-)

> +
>  /*
>   * How many different events we track in the global PMU mask.
>   *
>   * It is also used to know to needed number of event reference counters.
>   */
>  #define I915_PMU_MASK_BITS \
> -	(I915_ENGINE_SAMPLE_COUNT + __I915_PMU_TRACKED_EVENT_COUNT)
> +	(I915_ENGINE_SAMPLE_COUNT + \
> +	 I915_PMU_MAX_GTS * __I915_PMU_TRACKED_EVENT_COUNT)
>
>  #define I915_ENGINE_SAMPLE_COUNT (I915_SAMPLE_SEMA + 1)
>
> @@ -124,11 +127,11 @@ struct i915_pmu {
>	 * Only global counters are held here, while the per-engine ones are in
>	 * struct intel_engine_cs.
>	 */
> -	struct i915_pmu_sample sample[__I915_NUM_PMU_SAMPLERS];
> +	struct i915_pmu_sample sample[I915_PMU_MAX_GTS * __I915_NUM_PMU_SAMPLERS];
>	/**
>	 * @sleep_last: Last time GT parked for RC6 estimation.
>	 */
> -	ktime_t sleep_last;
> +	ktime_t sleep_last[I915_PMU_MAX_GTS];
>	/**
>	 * @irq_count: Number of interrupts
>	 *
> diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
> index dba7c5a5b25e..d5ac1fdeb2b1 100644
> --- a/include/uapi/drm/i915_drm.h
> +++ b/include/uapi/drm/i915_drm.h
> @@ -280,7 +280,16 @@ enum drm_i915_pmu_engine_sample {
>  #define I915_PMU_ENGINE_SEMA(class, instance) \
>	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_SEMA)
>
> -#define __I915_PMU_OTHER(x) (__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x))
> +/*
> + * Top 4 bits of every non-engine counter are GT id.
> + */
> +#define __I915_PMU_GT_SHIFT (60)

REG_GENMASK64 or GENMASK_ULL would be nicer but of course we can't put in
the uapi header, so ok.

> +
> +#define ___I915_PMU_OTHER(gt, x) \
> +	(((__u64)__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x)) | \
> +	((__u64)(gt) << __I915_PMU_GT_SHIFT))
> +
> +#define __I915_PMU_OTHER(x) ___I915_PMU_OTHER(0, x)
>
>  #define I915_PMU_ACTUAL_FREQUENCY	__I915_PMU_OTHER(0)
>  #define I915_PMU_REQUESTED_FREQUENCY	__I915_PMU_OTHER(1)
> @@ -290,6 +299,12 @@ enum drm_i915_pmu_engine_sample {
>
>  #define I915_PMU_LAST /* Deprecated - do not use */ I915_PMU_RC6_RESIDENCY
>
> +#define __I915_PMU_ACTUAL_FREQUENCY(gt)		___I915_PMU_OTHER(gt, 0)
> +#define __I915_PMU_REQUESTED_FREQUENCY(gt)	___I915_PMU_OTHER(gt, 1)
> +#define __I915_PMU_INTERRUPTS(gt)		___I915_PMU_OTHER(gt, 2)
> +#define __I915_PMU_RC6_RESIDENCY(gt)		___I915_PMU_OTHER(gt, 3)
> +#define __I915_PMU_SOFTWARE_GT_AWAKE_TIME(gt)	___I915_PMU_OTHER(gt, 4)
> +
>  /* Each region is a minimum of 16k, and there are at most 255 of them.
>   */
>  #define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
> --
> 2.36.1
>

Above comments are mostly nits so after addressing the above comments, this
is:

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@xxxxxxxxx>

Thanks.
--
Ashutosh



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux