On Fri, Apr 28, 2023 at 12:54:21PM +0300, Mika Kahola wrote:
> C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and
> HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add
> 4 lane support for c20.
>
> v2: Add 6.48Gbps and 6.75Gbps modes for eDP (RK)
> Fix lane check (RK)
> Fix multiline commenting (Arun)
> use usleep_range() instead of msleep() (Andi)
>
> Reviewed-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
LGTM,
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@xxxxxxxxx>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> Signed-off-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_cx0_phy.c | 288 +++++++++++++++---
> .../gpu/drm/i915/display/intel_cx0_phy_regs.h | 33 ++
> drivers/gpu/drm/i915/display/intel_ddi.c | 3 +-
> .../drm/i915/display/intel_display_types.h | 15 +-
> drivers/gpu/drm/i915/display/intel_dp.c | 12 +-
> 5 files changed, 309 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index 83180074b512..71163bc5bbf5 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -273,6 +273,18 @@ static void intel_cx0_write(struct drm_i915_private *i915, enum port port,
> __intel_cx0_write(i915, port, lane, addr, data, committed);
> }
>
> +static void intel_c20_sram_write(struct drm_i915_private *i915, enum port port,
> + int lane, u16 addr, u16 data)
> +{
> + assert_dc_off(i915);
> +
> + intel_cx0_write(i915, port, lane, PHY_C20_WR_ADDRESS_H, addr >> 8, 0);
> + intel_cx0_write(i915, port, lane, PHY_C20_WR_ADDRESS_L, addr & 0xff, 0);
> +
> + intel_cx0_write(i915, port, lane, PHY_C20_WR_DATA_H, data >> 8, 0);
> + intel_cx0_write(i915, port, lane, PHY_C20_WR_DATA_L, data & 0xff, 1);
> +}
> +
> static void __intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
> int lane, u16 addr, u8 clear, u8 set, bool committed)
> {
> @@ -1415,6 +1427,215 @@ void intel_c10pll_dump_hw_state(struct drm_i915_private *i915,
> i + 2, hw_state->pll[i + 2], i + 3, hw_state->pll[i + 3]);
> }
>
> +static bool intel_c20_use_mplla(u32 clock)
> +{
> + /* 10G and 20G rates use MPLLA */
> + if (clock == 312500 || clock == 625000)
> + return true;
> +
> + return false;
> +}
> +
> +static u8 intel_c20_get_dp_rate(u32 clock)
> +{
> + switch (clock) {
> + case 162000: /* 1.62 Gbps DP1.4 */
> + return 0;
> + case 270000: /* 2.7 Gbps DP1.4 */
> + return 1;
> + case 540000: /* 5.4 Gbps DP 1.4 */
> + return 2;
> + case 810000: /* 8.1 Gbps DP1.4 */
> + return 3;
> + case 216000: /* 2.16 Gbps eDP */
> + return 4;
> + case 243000: /* 2.43 Gbps eDP */
> + return 5;
> + case 324000: /* 3.24 Gbps eDP */
> + return 6;
> + case 432000: /* 4.32 Gbps eDP */
> + return 7;
> + case 312500: /* 10 Gbps DP2.0 */
> + return 8;
> + case 421875: /* 13.5 Gbps DP2.0 */
> + return 9;
> + case 625000: /* 20 Gbps DP2.0*/
> + return 10;
> + case 648000: /* 6.48 Gbps eDP*/
> + return 11;
> + case 675000: /* 6.75 Gbps eDP*/
> + return 12;
> + default:
> + MISSING_CASE(clock);
> + return 0;
> + }
> +}
> +
> +static u8 intel_c20_get_hdmi_rate(u32 clock)
> +{
> + switch (clock) {
> + case 25175:
> + case 27000:
> + case 74250:
> + case 148500:
> + case 594000:
> + return 0;
> + case 166670: /* 3 Gbps */
> + case 333330: /* 6 Gbps */
> + case 666670: /* 12 Gbps */
> + return 1;
> + case 444440: /* 8 Gbps */
> + return 2;
> + case 555560: /* 10 Gbps */
> + return 3;
> + default:
> + MISSING_CASE(clock);
> + return 0;
> + }
> +}
> +
> +static bool is_dp2(u32 clock)
> +{
> + /* DP2.0 clock rates */
> + if (clock == 312500 || clock == 421875 || clock == 625000)
> + return true;
> +
> + return false;
> +}
> +
> +static bool is_hdmi_frl(u32 clock)
> +{
> + switch (clock) {
> + case 166670: /* 3 Gbps */
> + case 333330: /* 6 Gbps */
> + case 444440: /* 8 Gbps */
> + case 555560: /* 10 Gbps */
> + case 666670: /* 12 Gbps */
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool intel_c20_protocol_switch_valid(struct intel_encoder *encoder)
> +{
> + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
> +
> + /* banks should not be cleared for DPALT/USB4/TBT modes */
> + /* TODO: optimize re-calibration in legacy mode */
> + return intel_tc_port_in_legacy_mode(intel_dig_port);
> +}
> +
> +static int intel_get_c20_custom_width(u32 clock, bool dp)
> +{
> + if (dp && is_dp2(clock))
> + return 2;
> + else if (is_hdmi_frl(clock))
> + return 1;
> + else
> + return 0;
> +}
> +
> +static void intel_c20_pll_program(struct drm_i915_private *i915,
> + const struct intel_crtc_state *crtc_state,
> + struct intel_encoder *encoder)
> +{
> + const struct intel_c20pll_state *pll_state = &crtc_state->cx0pll_state.c20;
> + bool dp = false;
> + int lane = crtc_state->lane_count > 2 ? INTEL_CX0_BOTH_LANES : INTEL_CX0_LANE0;
> + bool cntx;
> + int i;
> +
> + if (intel_crtc_has_dp_encoder(crtc_state))
> + dp = true;
> +
> + /* 1. Read current context selection */
> + cntx = intel_cx0_read(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_VDR_CUSTOM_SERDES_RATE) & BIT(0);
> +
> + /*
> + * 2. If there is a protocol switch from HDMI to DP or vice versa, clear
> + * the lane #0 MPLLB CAL_DONE_BANK DP2.0 10G and 20G rates enable MPLLA.
> + * Protocol switch is only applicable for MPLLA
> + */
> + if (intel_c20_protocol_switch_valid(encoder)) {
> + for (i = 0; i < 4; i++)
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(i), 0);
> + usleep_range(4000, 4100);
> + }
> +
> + /* 3. Write SRAM configuration context. If A in use, write configuration to B context */
> + /* 3.1 Tx configuration */
> + for (i = 0; i < ARRAY_SIZE(pll_state->tx); i++) {
> + if (cntx)
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_A_TX_CNTX_CFG(i), pll_state->tx[i]);
> + else
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_B_TX_CNTX_CFG(i), pll_state->tx[i]);
> + }
> +
> + /* 3.2 common configuration */
> + for (i = 0; i < ARRAY_SIZE(pll_state->cmn); i++) {
> + if (cntx)
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_A_CMN_CNTX_CFG(i), pll_state->cmn[i]);
> + else
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_B_CMN_CNTX_CFG(i), pll_state->cmn[i]);
> + }
> +
> + /* 3.3 mpllb or mplla configuration */
> + if (intel_c20_use_mplla(pll_state->clock)) {
> + for (i = 0; i < ARRAY_SIZE(pll_state->mplla); i++) {
> + if (cntx)
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
> + PHY_C20_A_MPLLA_CNTX_CFG(i),
> + pll_state->mplla[i]);
> + else
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
> + PHY_C20_B_MPLLA_CNTX_CFG(i),
> + pll_state->mplla[i]);
> + }
> + } else {
> + for (i = 0; i < ARRAY_SIZE(pll_state->mpllb); i++) {
> + if (cntx)
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
> + PHY_C20_A_MPLLB_CNTX_CFG(i),
> + pll_state->mpllb[i]);
> + else
> + intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
> + PHY_C20_B_MPLLB_CNTX_CFG(i),
> + pll_state->mpllb[i]);
> + }
> + }
> +
> + /* 4. Program custom width to match the link protocol */
> + intel_cx0_rmw(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_WIDTH,
> + PHY_C20_CUSTOM_WIDTH_MASK,
> + PHY_C20_CUSTOM_WIDTH(intel_get_c20_custom_width(pll_state->clock, dp)),
> + MB_WRITE_COMMITTED);
> +
> + /* 5. For DP or 6. For HDMI */
> + if (dp) {
> + intel_cx0_rmw(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_SERDES_RATE,
> + BIT(6) | PHY_C20_CUSTOM_SERDES_MASK,
> + BIT(6) | PHY_C20_CUSTOM_SERDES(intel_c20_get_dp_rate(pll_state->clock)),
> + MB_WRITE_COMMITTED);
> + } else {
> + intel_cx0_rmw(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_SERDES_RATE,
> + BIT(7) | PHY_C20_CUSTOM_SERDES_MASK,
> + is_hdmi_frl(pll_state->clock) ? BIT(7) : 0,
> + MB_WRITE_COMMITTED);
> +
> + intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_HDMI_RATE,
> + intel_c20_get_hdmi_rate(pll_state->clock),
> + MB_WRITE_COMMITTED);
> + }
> +
> + /*
> + * 7. Write Vendor specific registers to toggle context setting to load
> + * the updated programming toggle context bit
> + */
> + intel_cx0_rmw(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_SERDES_RATE,
> + BIT(0), cntx ? 0 : 1, MB_WRITE_COMMITTED);
> +}
> +
> int intel_c10pll_calc_port_clock(struct intel_encoder *encoder,
> const struct intel_c10pll_state *pll_state)
> {
> @@ -1456,7 +1677,11 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
> val |= XELPDP_LANE1_PHY_CLOCK_SELECT;
>
> val |= XELPDP_FORWARD_CLOCK_UNGATE;
> - val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
> +
> + if (is_hdmi_frl(crtc_state->port_clock))
> + val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_DIV18CLK);
> + else
> + val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
>
> /* TODO: HDMI FRL */
> /* TODO: DP2.0 10G and 20G rates enable MPLLA*/
> @@ -1612,7 +1837,7 @@ static void intel_cx0_phy_lane_reset(struct drm_i915_private *i915, enum port po
> phy_name(phy), XELPDP_PORT_RESET_END_TIMEOUT);
> }
>
> -static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
> +static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
> struct intel_encoder *encoder, int lane_count,
> bool lane_reversal)
> {
> @@ -1620,9 +1845,11 @@ static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
> bool dp_alt_mode = intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder));
> enum port port = encoder->port;
>
> - intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
> - 0, C10_VDR_CTRL_MSGBUS_ACCESS,
> - MB_WRITE_COMMITTED);
> + if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
> + intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
> + PHY_C10_VDR_CONTROL(1), 0,
> + C10_VDR_CTRL_MSGBUS_ACCESS,
> + MB_WRITE_COMMITTED);
>
> /* TODO: DP-alt MFD case where only one PHY lane should be programmed. */
> l0t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2));
> @@ -1685,9 +1912,11 @@ static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
> intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2),
> l1t2, MB_WRITE_COMMITTED);
>
> - intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
> - 0, C10_VDR_CTRL_UPDATE_CFG,
> - MB_WRITE_COMMITTED);
> + if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
> + intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
> + PHY_C10_VDR_CONTROL(1), 0,
> + C10_VDR_CTRL_UPDATE_CFG,
> + MB_WRITE_COMMITTED);
> }
>
> static u32 intel_cx0_get_pclk_pll_request(u8 lane_mask)
> @@ -1712,8 +1941,8 @@ static u32 intel_cx0_get_pclk_pll_ack(u8 lane_mask)
> return val;
> }
>
> -static void intel_c10pll_enable(struct intel_encoder *encoder,
> - const struct intel_crtc_state *crtc_state)
> +void intel_cx0pll_enable(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> enum phy phy = intel_port_to_phy(i915, encoder->port);
> @@ -1721,6 +1950,7 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
> bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
> u8 maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 :
> INTEL_CX0_LANE0;
> + intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
>
> /*
> * 1. Program PORT_CLOCK_CTL REGISTER to configure
> @@ -1739,13 +1969,16 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
> CX0_P2_STATE_READY);
>
> /* 4. Program PHY internal PLL internal registers. */
> - intel_c10_pll_program(i915, crtc_state, encoder);
> + if (intel_is_c10phy(i915, phy))
> + intel_c10_pll_program(i915, crtc_state, encoder);
> + else
> + intel_c20_pll_program(i915, crtc_state, encoder);
>
> /*
> * 5. Program the enabled and disabled owned PHY lane
> * transmitters over message bus
> */
> - intel_c10_program_phy_lane(i915, encoder, crtc_state->lane_count, lane_reversal);
> + intel_cx0_program_phy_lane(i915, encoder, crtc_state->lane_count, lane_reversal);
>
> /*
> * 6. Follow the Display Voltage Frequency Switching - Sequence
> @@ -1779,32 +2012,22 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
> * 10. Follow the Display Voltage Frequency Switching Sequence After
> * Frequency Change. We handle this step in bxt_set_cdclk().
> */
> -}
> -
> -void intel_cx0pll_enable(struct intel_encoder *encoder,
> - const struct intel_crtc_state *crtc_state)
> -{
> - struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> - enum phy phy = intel_port_to_phy(i915, encoder->port);
> - intel_wakeref_t wakeref;
> -
> - wakeref = intel_cx0_phy_transaction_begin(encoder);
> -
> - drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
> - intel_c10pll_enable(encoder, crtc_state);
>
> /* TODO: enable TBT-ALT mode */
> intel_cx0_phy_transaction_end(encoder, wakeref);
> }
>
> -static void intel_c10pll_disable(struct intel_encoder *encoder)
> +void intel_cx0pll_disable(struct intel_encoder *encoder)
> {
> struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> enum phy phy = intel_port_to_phy(i915, encoder->port);
> + bool is_c10 = intel_is_c10phy(i915, phy);
> + intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
>
> /* 1. Change owned PHY lane power to Disable state. */
> intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES,
> - CX0_P2PG_STATE_DISABLE);
> + is_c10 ? CX0_P2PG_STATE_DISABLE :
> + CX0_P4PG_STATE_DISABLE);
>
> /*
> * 2. Follow the Display Voltage Frequency Switching Sequence Before
> @@ -1842,18 +2065,7 @@ static void intel_c10pll_disable(struct intel_encoder *encoder)
> XELPDP_DDI_CLOCK_SELECT_MASK, 0);
> intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> XELPDP_FORWARD_CLOCK_UNGATE, 0);
> -}
> -
> -void intel_cx0pll_disable(struct intel_encoder *encoder)
> -{
> - struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> - enum phy phy = intel_port_to_phy(i915, encoder->port);
> - intel_wakeref_t wakeref;
>
> - wakeref = intel_cx0_phy_transaction_begin(encoder);
> -
> - drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
> - intel_c10pll_disable(encoder);
> intel_cx0_phy_transaction_end(encoder, wakeref);
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> index 20024622d0eb..3aa334b15eaf 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
> @@ -177,4 +177,37 @@
> #define PHY_CX0_TX_CONTROL(tx, control) (0x400 + ((tx) - 1) * 0x200 + (control))
> #define CONTROL2_DISABLE_SINGLE_TX REG_BIT(6)
>
> +/* C20 Registers */
> +#define PHY_C20_WR_ADDRESS_L 0xC02
> +#define PHY_C20_WR_ADDRESS_H 0xC03
> +#define PHY_C20_WR_DATA_L 0xC04
> +#define PHY_C20_WR_DATA_H 0xC05
> +#define PHY_C20_RD_ADDRESS_L 0xC06
> +#define PHY_C20_RD_ADDRESS_H 0xC07
> +#define PHY_C20_RD_DATA_L 0xC08
> +#define PHY_C20_RD_DATA_H 0xC09
> +#define PHY_C20_VDR_CUSTOM_SERDES_RATE 0xD00
> +#define PHY_C20_VDR_HDMI_RATE 0xD01
> +#define PHY_C20_CONTEXT_TOGGLE REG_BIT8(0)
> +#define PHY_C20_CUSTOM_SERDES_MASK REG_GENMASK8(4, 1)
> +#define PHY_C20_CUSTOM_SERDES(val) REG_FIELD_PREP8(PHY_C20_CUSTOM_SERDES_MASK, val)
> +#define PHY_C20_VDR_CUSTOM_WIDTH 0xD02
> +#define PHY_C20_CUSTOM_WIDTH_MASK REG_GENMASK(1, 0)
> +#define PHY_C20_CUSTOM_WIDTH(val) REG_FIELD_PREP8(PHY_C20_CUSTOM_WIDTH_MASK, val)
> +#define PHY_C20_A_TX_CNTX_CFG(idx) (0xCF2E - (idx))
> +#define PHY_C20_B_TX_CNTX_CFG(idx) (0xCF2A - (idx))
> +#define PHY_C20_A_CMN_CNTX_CFG(idx) (0xCDAA - (idx))
> +#define PHY_C20_B_CMN_CNTX_CFG(idx) (0xCDA5 - (idx))
> +#define PHY_C20_A_MPLLA_CNTX_CFG(idx) (0xCCF0 - (idx))
> +#define PHY_C20_B_MPLLA_CNTX_CFG(idx) (0xCCE5 - (idx))
> +#define C20_MPLLA_FRACEN REG_BIT(14)
> +#define C20_MPLLA_TX_CLK_DIV_MASK REG_GENMASK(10, 8)
> +#define PHY_C20_A_MPLLB_CNTX_CFG(idx) (0xCB5A - (idx))
> +#define PHY_C20_B_MPLLB_CNTX_CFG(idx) (0xCB4E - (idx))
> +#define C20_MPLLB_TX_CLK_DIV_MASK REG_GENMASK(15, 13)
> +#define C20_MPLLB_FRACEN REG_BIT(13)
> +#define C20_MULTIPLIER_MASK REG_GENMASK(11, 0)
> +
> +#define RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(idx) (0x303D + (idx))
> +
> #endif /* __INTEL_CX0_REG_DEFS_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 29e4bfab4635..f445f2613adb 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3359,7 +3359,8 @@ void intel_ddi_update_active_dpll(struct intel_atomic_state *state,
> struct intel_crtc *slave_crtc;
> enum phy phy = intel_port_to_phy(i915, encoder->port);
>
> - if (!intel_phy_is_tc(i915, phy))
> + /* FIXME: Add MTL pll_mgr */
> + if (DISPLAY_VER(i915) >= 14 || !intel_phy_is_tc(i915, phy))
> return;
>
> intel_update_active_dpll(state, crtc, encoder);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 35c260bd1461..99b187f2f4ed 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -996,8 +996,21 @@ struct intel_c10pll_state {
> u8 pll[20];
> };
>
> +struct intel_c20pll_state {
> + u32 clock; /* in kHz */
> + u16 tx[3];
> + u16 cmn[4];
> + union {
> + u16 mplla[10];
> + u16 mpllb[11];
> + };
> +};
> +
> struct intel_cx0pll_state {
> - struct intel_c10pll_state c10;
> + union {
> + struct intel_c10pll_state c10;
> + struct intel_c20pll_state c20;
> + };
> bool ssc_enabled;
> };
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 1d28a2560ae0..4361c1ac65c3 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -53,6 +53,7 @@
> #include "intel_combo_phy_regs.h"
> #include "intel_connector.h"
> #include "intel_crtc.h"
> +#include "intel_cx0_phy.h"
> #include "intel_ddi.h"
> #include "intel_de.h"
> #include "intel_display_types.h"
> @@ -423,7 +424,14 @@ static int ehl_max_source_rate(struct intel_dp *intel_dp)
>
> static int mtl_max_source_rate(struct intel_dp *intel_dp)
> {
> - return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> + enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
> +
> + if (intel_is_c10phy(i915, phy))
> + return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
> +
> + return 2000000;
> }
>
> static int vbt_max_link_rate(struct intel_dp *intel_dp)
> @@ -452,7 +460,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
> /* The values must be in increasing order */
> static const int mtl_rates[] = {
> 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000,
> - 810000,
> + 810000, 1000000, 1350000, 2000000,
> };
> static const int icl_rates[] = {
> 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000,
> --
> 2.34.1
>
