Use MPLLA for DP2.0 rates 10G and 20G, when ssc is enabled. v2: Fix typo in commit message (Animesh) Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx> Reviewed-by: Arun R Murthy <arun.r.murthy@xxxxxxxxx> Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_cx0_phy.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c index 5409be0d5812..63d63c23647e 100644 --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c @@ -2349,8 +2349,11 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder, val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK); /* TODO: HDMI FRL */ - /* TODO: DP2.0 10G and 20G rates enable MPLLA*/ - val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0; + /* DP2.0 10G and 20G rates enable MPLLA*/ + if (crtc_state->port_clock == 1000000 || crtc_state->port_clock == 2000000) + val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLA : 0; + else + val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0; intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port), XELPDP_LANE1_PHY_CLOCK_SELECT | XELPDP_FORWARD_CLOCK_UNGATE | -- 2.34.1
