None of the remaining backlight registers that use DISPLAY_MMIO_BASE() are used on VLV/CHV, which are the only platforms that have non-zero base. Just drop the DISPLAY_MMIO_BASE() use, reducing the implicit dev_priv references. Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_backlight_regs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_backlight_regs.h b/drivers/gpu/drm/i915/display/intel_backlight_regs.h index 02bd1f8201bf..d0cdfd631d75 100644 --- a/drivers/gpu/drm/i915/display/intel_backlight_regs.h +++ b/drivers/gpu/drm/i915/display/intel_backlight_regs.h @@ -21,7 +21,7 @@ #define VLV_BLC_HIST_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_HIST_CTL_A, _VLV_BLC_HIST_CTL_B) /* Backlight control */ -#define BLC_PWM_CTL2 _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61250) /* 965+ only */ +#define BLC_PWM_CTL2 _MMIO(0x61250) /* 965+ only */ #define BLM_PWM_ENABLE (1 << 31) #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ #define BLM_PIPE_SELECT (1 << 29) @@ -44,7 +44,7 @@ #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) #define BLM_PHASE_IN_INCR_SHIFT (0) #define BLM_PHASE_IN_INCR_MASK (0xff << 0) -#define BLC_PWM_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61254) +#define BLC_PWM_CTL _MMIO(0x61254) /* * This is the most significant 15 bits of the number of backlight cycles in a * complete cycle of the modulated backlight control. @@ -66,7 +66,7 @@ #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ -#define BLC_HIST_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61260) +#define BLC_HIST_CTL _MMIO(0x61260) #define BLM_HISTOGRAM_ENABLE (1 << 31) /* New registers for PCH-split platforms. Safe where new bits show up, the -- 2.34.1
