From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx> Hi This patch series is based on emails I sent a few days ago, with subject "proposals/questions about the IRQ registers". The biggest goal of the series is to have an unified way to initialize/reset IRQ regsiters. After this series, when you add new interrupts to our driver you won't need to think about doing the correct reads, writes and posting_reads, all you'll need to worry about is to call the macros everyone else calls. So now either all the registers are initialized correctly or all the registers are initialized wrongly. The first 10 patches do all the rework on i915+. The changes should be incremental and any non-trivial changes are on separate patches, so bisecting regressions should be very easy. It is worth mentioning that patches 2, 6, 9 and 10 touch VLV-specific code, and I don't have a way to test this code. On my intial patches the i8xx code was changed along with the i915+ code, but Ben suggested I shouldn't be touching i8xx code, so patches 11-15 do the i8xx work. I don't know if we really want these patches, but they're here anyway, so feel free to give them a NACK, I won't complain. In case we decide to merge the patches, git bisect should easily spot regressions. Patches tested on Haswell (constant use for 2 weeks), SandyBridge (a few hours of usage) and Atom (only booted and then suspend/resumed once). Thanks, Paulo Paulo Zanoni (15): drm/i915: add INTEL_IRQ_REG_RESET drm/i915: change how VLV_IIR is reset drm/i915: port i965_irq_uninstall go INTEL_IRQ_REG_RESET drm/i915: really clear the IIR registers drm/i915: add INTEL_IRQ_REG_INIT drm/i915: use INTEL_IRQ_REG_INIT on VLV too drm/i915: reset the IIR registers at preinstall drm/i915: WARN if IIR is not zero at irq_postinstall drm/i915: remove additional zerogin of VLV_IIR at postinstall drm/i915: remove extra clearing of GTIIR from VLV irq preinstall drm/i915: add INTEL_IRQ_REG_RESET16 drm/i915: really clear the IIR registers on i8xx drm/i915: add INTEL_IRQ_REG_INIT16 drm/i915: reset the i8xx IIR registers at preinstall drm/i915: WARN if IIR is not zero at i8xx irq_postinstall drivers/gpu/drm/i915/i915_irq.c | 144 +++++++++++++++++----------------------- 1 file changed, 62 insertions(+), 82 deletions(-) -- 1.8.1.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
