Re: [PATCH] drm/i915/guc: Check for ct enabled while waiting for response

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 16 Jun 2022 15:01:59 -0700, Zhanjun Dong wrote:
>
> We are seeing error message of "No response for request". Some cases
> happened while waiting for response and reset/suspend action was triggered.
> In this case, no response is not an error, active requests will be
> cancelled.
>
> This patch will handle this condition and change the error message into
> debug message.

The convention we follow in drm is to record the version of the patch and
what changed in that version.

Generally I am ok with this version of the patch but still have a couple of
questions.

> -static int wait_for_ct_request_update(struct ct_request *req, u32 *status)
> +static int wait_for_ct_request_update(struct intel_guc_ct *ct, struct ct_request *req, u32 *status)
>  {
>	int err;
> +	bool ct_enabled;
>
>	/*
>	 * Fast commands should complete in less than 10us, so sample quickly
> @@ -481,12 +483,15 @@ static int wait_for_ct_request_update(struct ct_request *req, u32 *status)
>  #define GUC_CTB_RESPONSE_TIMEOUT_SHORT_MS 10
>  #define GUC_CTB_RESPONSE_TIMEOUT_LONG_MS 1000
>  #define done \
> -	(FIELD_GET(GUC_HXG_MSG_0_ORIGIN, READ_ONCE(req->status)) == \
> +	(!(ct_enabled = intel_guc_ct_enabled(ct)) || \
> +	 FIELD_GET(GUC_HXG_MSG_0_ORIGIN, READ_ONCE(req->status)) == \
>	 GUC_HXG_ORIGIN_GUC)
>	err = wait_for_us(done, GUC_CTB_RESPONSE_TIMEOUT_SHORT_MS);
>	if (err)
>		err = wait_for(done, GUC_CTB_RESPONSE_TIMEOUT_LONG_MS);
>  #undef done
> +	if (!ct_enabled)
> +		err = -ECANCELED;

So we have the choice of either setting the request status here as I was
suggesting earlier, e.g. as follows:

	#define   GUC_HXG_TYPE_REQUEST_CANCELED        4u // unused value

	if (!ct_enabled)
		req->status = GUC_HXG_TYPE_REQUEST_CANCELED;

We would return 0 in this case and would check for the req->status value
above where needed.

Or we can return -ECANCELED. I don't know if -ECANCELED is the right value
to return but whatever we return will have to be unique (ununsed elsewhere)
since we are relying on the return value. -ECANCELED is unique so that part
is ok.

Do other reviewers have a preference whether we should set req->status or
return a unique return value?

>	*status = req->status;
>	return err;
> @@ -703,11 +708,15 @@ static int ct_send(struct intel_guc_ct *ct,
>
>	intel_guc_notify(ct_to_guc(ct));
>
> -	err = wait_for_ct_request_update(&request, status);
> +	err = wait_for_ct_request_update(ct, &request, status);
>	g2h_release_space(ct, GUC_CTB_HXG_MSG_MAX_LEN);
>	if (unlikely(err)) {
> -		CT_ERROR(ct, "No response for request %#x (fence %u)\n",
> -			 action[0], request.fence);
> +		if (err == -ECANCELED)
> +			CT_DEBUG(ct, "Request %#x (fence %u) cancelled as CTB is disabled\n",
> +				 action[0], request.fence);
> +		else
> +			CT_ERROR(ct, "No response for request %#x (fence %u)\n",
> +				 action[0], request.fence);
>		goto unlink;
>	}
>
> @@ -771,8 +780,9 @@ int intel_guc_ct_send(struct intel_guc_ct *ct, const u32 *action, u32 len,
>
>	ret = ct_send(ct, action, len, response_buf, response_buf_size, &status);
>	if (unlikely(ret < 0)) {
> -		CT_ERROR(ct, "Sending action %#x failed (%pe) status=%#X\n",
> -			 action[0], ERR_PTR(ret), status);
> +		if (ret != -ECANCELED)
> +			CT_ERROR(ct, "Sending action %#x failed (%pe) status=%#X\n",
> +				 action[0], ERR_PTR(ret), status);

I am wondering why we even have this print and should we just delete it or
convert it to CT_DEBUG(). The reason is that only error prints closest to
where the actual error occurs are useful since they pin-point the error
clearly. This to be seems to be a "second" print from a higher level
function which does not seem particularly useful.


>	} else if (unlikely(ret)) {
>		CT_DEBUG(ct, "send action %#x returned %d (%#x)\n",
>			 action[0], ret, ret);
> --
> 2.36.0
>



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux