Re: [PATCH] drm/i915/guc: Check for ct enabled while waiting for response

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 16 Jun 2022 15:01:59 -0700, Zhanjun Dong wrote:
>
> We are seeing error message of "No response for request". Some cases
> happened while waiting for response and reset/suspend action was triggered.
> In this case, no response is not an error, active requests will be
> cancelled.
>
> This patch will handle this condition and change the error message into
> debug message.
>
> Signed-off-by: Zhanjun Dong <zhanjun.dong@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c | 24 ++++++++++++++++-------
>  1 file changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c
> index f01325cd1b62..f07a7666b1ad 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_ct.c
> @@ -455,6 +455,7 @@ static int ct_write(struct intel_guc_ct *ct,
>
>  /**
>   * wait_for_ct_request_update - Wait for CT request state update.
> + * @ct:		pointer to CT
>   * @req:	pointer to pending request
>   * @status:	placeholder for status
>   *
> @@ -467,9 +468,10 @@ static int ct_write(struct intel_guc_ct *ct,
>   * *	0 response received (status is valid)
>   * *	-ETIMEDOUT no response within hardcoded timeout
>   */
> -static int wait_for_ct_request_update(struct ct_request *req, u32 *status)
> +static int wait_for_ct_request_update(struct intel_guc_ct *ct, struct ct_request *req, u32 *status)
>  {
>	int err;
> +	bool ct_enabled;
>
>	/*
>	 * Fast commands should complete in less than 10us, so sample quickly
> @@ -481,12 +483,15 @@ static int wait_for_ct_request_update(struct ct_request *req, u32 *status)
>  #define GUC_CTB_RESPONSE_TIMEOUT_SHORT_MS 10
>  #define GUC_CTB_RESPONSE_TIMEOUT_LONG_MS 1000
>  #define done \
> -	(FIELD_GET(GUC_HXG_MSG_0_ORIGIN, READ_ONCE(req->status)) == \
> +	(!(ct_enabled = intel_guc_ct_enabled(ct)) || \
> +	 FIELD_GET(GUC_HXG_MSG_0_ORIGIN, READ_ONCE(req->status)) == \
>	 GUC_HXG_ORIGIN_GUC)
>	err = wait_for_us(done, GUC_CTB_RESPONSE_TIMEOUT_SHORT_MS);
>	if (err)
>		err = wait_for(done, GUC_CTB_RESPONSE_TIMEOUT_LONG_MS);
>  #undef done
> +	if (!ct_enabled)
> +		err = -ECANCELED;

Actually here's an even simpler suggestion. We could just do:

	if (!ct_enabled)
		CT_DEBUG(ct, "Request %#x (fence %u) cancelled as CTB is disabled\n", ...);

And return 0 as before. This way we won't have to make any changes in
either ct_send() or intel_guc_ct_send(). So intel_guc_ct_enabled() just
serves to get us out of the wait early and prevent the -ETIMEDOUT return
(and 0 return avoids all the error messages we are trying to eliminate).



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux