On Thu, 11 Nov 2021, "Tseng, William" <william.tseng@xxxxxxxxx> wrote:
> Noted. Thanks for your consideration, Jani.
And pushed, thanks for the patch.
BR,
Jani.
>
> Regards
> William
>
> -----Original Message-----
> From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Sent: Wednesday, November 10, 2021 6:45 PM
> To: Tseng, William <william.tseng@xxxxxxxxx>; intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Tseng, William <william.tseng@xxxxxxxxx>; Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>; Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; Lee, Shawn C <shawn.c.lee@xxxxxxxxx>; Chiou, Cooper <cooper.chiou@xxxxxxxxx>
> Subject: Re: [PATCH v3] drm/i915/dsi: transmit brightness command in HS state
>
> On Wed, 10 Nov 2021, William Tseng <william.tseng@xxxxxxxxx> wrote:
>> In Video Mode, if DSI transcoder is set to transmit packets in LP
>> Escape mode, screen flickering would be obseved when brightness
>> commands are continuously and quickly transmitted to a panel.
>>
>> The problem may be resolved by changing the mode to transmit packets
>> from Low Power to HS.
>>
>> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
>> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
>> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>> Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
>> Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
>> Signed-off-by: William Tseng <william.tseng@xxxxxxxxx>
>> ---
>> drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
>> b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
>> index f61ed82e8867..7d234429e71e 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
>> @@ -71,6 +71,7 @@ static void dcs_set_backlight(const struct drm_connector_state *conn_state, u32
>> u8 data[2] = {};
>> enum port port;
>> size_t len = panel->backlight.max > U8_MAX ? 2 : 1;
>> + unsigned long mode_flags;
>>
>> if (len == 1) {
>> data[0] = level;
>> @@ -81,8 +82,11 @@ static void dcs_set_backlight(const struct
>> drm_connector_state *conn_state, u32
>>
>> for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
>> dsi_device = intel_dsi->dsi_hosts[port]->device;
>> + mode_flags = dsi_device->mode_flags;
>> + dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
>> &data, len);
>> + dsi_device->mode_flags = mode_flags;
>
> I realize we don't really have a clear picture how to manage
> ->mode_flags or MIPI_DSI_MODE_LPM in particular, but this seems like the
> safest option for now.
>
> Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
>
> I'll push once CI results are in; had to request a re-run.
>
>
>
>> }
>> }
>
> --
> Jani Nikula, Intel Open Source Graphics Center
--
Jani Nikula, Intel Open Source Graphics Center
