Re: [PATCH 2/6] drm/i915/dp: Ensure sink rate values are always valid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 18 Oct 2021, Imre Deak <imre.deak@xxxxxxxxx> wrote:
> Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
> DPCD capabilities are successfully read from the sink. During this time
> intel_dp->num_common_rates is 0 which can lead to a
>
> intel_dp->common_rates[-1]    (*)
>
> access, which is an undefined behaviour, in the following cases:
>
> - In intel_dp_sync_state(), if the encoder is enabled without a sink
>   connected to the encoder's connector (BIOS enabled a monitor, but the
>   user unplugged the monitor until the driver loaded).
> - In intel_dp_sync_state() if the encoder is enabled with a sink
>   connected, but for some reason the DPCD read has failed.
> - In intel_dp_compute_link_config() if modesetting a connector without
>   a sink connected on it.
> - In intel_dp_compute_link_config() if modesetting a connector with a
>   a sink connected on it, but before probing the connector first.
>
> To avoid the (*) access in all the above cases, make sure that the sink
> rate table - and hence the common rate table - is always valid, by
> setting a default minimum sink rate when registering the connector
> before anything could use it.
>
> I also considered setting all the DP link rates by default, so that
> modesetting with higher resolution modes also succeeds in the last two
> cases above. However in case a sink is not connected that would stop
> working after the first modeset, due to the LT fallback logic. So this
> would need more work, beyond the scope of this fix.
>
> As I mentioned in the previous patch, I don't think the issue this patch
> fixes is user visible, however it is an undefined behaviour by
> definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.

I think the question here, and in the following patches, is whether this
papers over potential bugs elsewhere.

Would the original bug fixed by patch 1 have been detected if all the
safeguards here had been in place? Point being, we shouldn't be doing
any of these things before we've read the dpcd.

BR,
Jani.


>
> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
> References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
> Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 23de500d56b52..153ae944a354b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -120,6 +120,12 @@ bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
>  	return crtc_state->port_clock >= 1000000;
>  }
>  
> +static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp)
> +{
> +	intel_dp->sink_rates[0] = 162000;
> +	intel_dp->num_sink_rates = 1;
> +}
> +
>  /* update sink rates from dpcd */
>  static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
>  {
> @@ -5003,6 +5009,8 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
>  	}
>  
>  	intel_dp_set_source_rates(intel_dp);
> +	intel_dp_set_default_sink_rates(intel_dp);
> +	intel_dp_set_common_rates(intel_dp);
>  
>  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>  		intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp);

-- 
Jani Nikula, Intel Open Source Graphics Center




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux