128b/132b has a separate transcoder DDI mode, which also requires the
MST transport select to be set. Note that we'll use DP MST also for
single-stream 128b/132b.
Having the FDI and 128b/132b modes share the register mode value
complicates things a bit.
Bspec: 50493
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 27 ++++++++++++++++++------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 8b8f5d679b72..1ee817348bf5 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -505,7 +505,10 @@ intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder,
temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B;
temp |= (crtc_state->fdi_lanes - 1) << 1;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) {
- temp |= TRANS_DDI_MODE_SELECT_DP_MST;
+ if (crtc_state->port_clock > 1000000)
+ temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B;
+ else
+ temp |= TRANS_DDI_MODE_SELECT_DP_MST;
temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
if (DISPLAY_VER(dev_priv) >= 12) {
@@ -693,7 +696,12 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
break;
case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B:
- ret = type == DRM_MODE_CONNECTOR_VGA;
+ if (IS_DG2(dev_priv))
+ /* 128b/132b */
+ ret = false;
+ else
+ /* FDI */
+ ret = type == DRM_MODE_CONNECTOR_VGA;
break;
default:
@@ -780,8 +788,9 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
if ((tmp & port_mask) != ddi_select)
continue;
- if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
- TRANS_DDI_MODE_SELECT_DP_MST)
+ if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == TRANS_DDI_MODE_SELECT_DP_MST ||
+ (IS_DG2(dev_priv) &&
+ (tmp & TRANS_DDI_MODE_SELECT_MASK) == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B))
mst_pipe_mask |= BIT(p);
*pipe_mask |= BIT(p);
@@ -3572,9 +3581,6 @@ static void intel_ddi_read_func_ctl(struct intel_encoder *encoder,
pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
pipe_config->lane_count = 4;
break;
- case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B:
- pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
- break;
case TRANS_DDI_MODE_SELECT_DP_SST:
if (encoder->type == INTEL_OUTPUT_EDP)
pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
@@ -3603,6 +3609,13 @@ static void intel_ddi_read_func_ctl(struct intel_encoder *encoder,
pipe_config->infoframes.enable |=
intel_hdmi_infoframes_enabled(encoder, pipe_config);
break;
+ case TRANS_DDI_MODE_SELECT_FDI_OR_128B132B:
+ if (!IS_DG2(dev_priv)) {
+ /* FDI */
+ pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
+ break;
+ }
+ fallthrough; /* 128b/132b */
case TRANS_DDI_MODE_SELECT_DP_MST:
pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
pipe_config->lane_count =
--
2.20.1
