[PATCH 10/15] drm/i915: split up fdi_set_m_n into computation and hw setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 19, 2013 at 11:24:42AM +0200, Daniel Vetter wrote:
> And also move the computed m_n values into the pipe_config. This is a
> prep step to move the fdi state computation completely into the
> prepare phase of the modeset sequence. Which will allow us to handle
> fdi link bw constraints in a better way.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>

Reviewed-by: Ville Syrj?l? <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++-----------
>  drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
>  2 files changed, 17 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index b7774c1..7abcd60 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5480,13 +5480,11 @@ void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
>  	}
>  }
>  
> -static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
> +static void ironlake_fdi_compute_config(struct intel_crtc *intel_crtc)
>  {
> -	struct drm_device *dev = crtc->dev;
> -	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	struct drm_device *dev = intel_crtc->base.dev;
>  	struct drm_display_mode *adjusted_mode =
>  		&intel_crtc->config.adjusted_mode;
> -	struct intel_link_m_n m_n = {0};
>  	int target_clock, lane, link_bw;
>  
>  	/* FDI is a binary signal running at ~2.7GHz, encoding
> @@ -5511,9 +5509,7 @@ static void ironlake_fdi_set_m_n(struct drm_crtc *crtc)
>  	if (intel_crtc->config.pixel_multiplier > 1)
>  		link_bw *= intel_crtc->config.pixel_multiplier;
>  	intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock,
> -			       link_bw, &m_n);
> -
> -	intel_cpu_transcoder_set_m_n(intel_crtc, &m_n);
> +			       link_bw, &intel_crtc->config.fdi_m_n);
>  }
>  
>  static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
> @@ -5735,8 +5731,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
>  	/* Note, this also computes intel_crtc->fdi_lanes which is used below in
>  	 * ironlake_check_fdi_lanes. */
>  	intel_crtc->config.fdi_lanes = 0;
> -	if (intel_crtc->config.has_pch_encoder)
> -		ironlake_fdi_set_m_n(crtc);
> +	if (intel_crtc->config.has_pch_encoder) {
> +		ironlake_fdi_compute_config(intel_crtc);
> +
> +		intel_cpu_transcoder_set_m_n(intel_crtc,
> +					     &intel_crtc->config.fdi_m_n);
> +	}
>  
>  	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
>  
> @@ -5866,8 +5866,12 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
>  
>  	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
>  
> -	if (intel_crtc->config.has_pch_encoder)
> -		ironlake_fdi_set_m_n(crtc);
> +	if (intel_crtc->config.has_pch_encoder) {
> +		ironlake_fdi_compute_config(intel_crtc);
> +
> +		intel_cpu_transcoder_set_m_n(intel_crtc,
> +					     &intel_crtc->config.fdi_m_n);
> +	}
>  
>  	haswell_set_pipeconf(crtc);
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 179b42b..f40b43f 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -230,8 +230,9 @@ struct intel_crtc_config {
>  	/* Used by SDVO (and if we ever fix it, HDMI). */
>  	unsigned pixel_multiplier;
>  
> -	/* FDI lanes used, only valid if has_pch_encoder is set. */
> +	/* FDI configuration, only valid if has_pch_encoder is set. */
>  	int fdi_lanes;
> +	struct intel_link_m_n fdi_m_n;
>  };
>  
>  struct intel_crtc {
> -- 
> 1.7.11.7
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrj?l?
Intel OTC


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux