ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf);
if (ret < 0)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 2b83f0f433a2..1962d6dd8641 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2560,10 +2560,6 @@ static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp)
static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
{
-#define PCON_EXTENDED_TRAIN_MODE (1 > 0)
-#define PCON_CONCURRENT_MODE (1 > 0)
-#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE
-#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE
#define TIMEOUT_FRL_READY_MS 500
#define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
@@ -2597,10 +2593,12 @@ static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
return -ETIMEDOUT;
max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw);
- ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE);
+ ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw,
+ DP_PCON_FRL_MODE_SEQUENTIAL);
if (ret < 0)
return ret;
- ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE);
+ ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask,
+ DP_PCON_FRL_TRAIN_NORMAL);
if (ret < 0)
return ret;
ret = drm_dp_pcon_frl_enable(&intel_dp->aux);
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index edffd1dcca3e..c3f56e87a5ec 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1646,6 +1646,48 @@ enum dp_content_type {
DP_CONTENT_TYPE_GAME = 0x04,
};
+/**
+ * enum dp_pcon_frl_train_type - drm DP PCON FRL Training Type
+ *
+ * This enum is used to select FRL training type for FRL training between
+ * an HDMI2.1 PCON and an HDMI2.1 sink.
+ *
+ * It is based on VESA DP-to-HDMI Protocol Converter (PCON) Specification
+ * Sec 6.1 Table-3.
+ * In Normal FRL training, the PCON tries each frl bw from the MAX FRL MASK
+ * starting from min, and stops when link training is successful.
+ * In Extended FRL training, all frl bw selected in the mask are trained by the
+ * PCON.
+ *
+ * @DP_PCON_FRL_TRAIN_NORMAL: FRL training type Normal
+ * @DP_PCON_FRL_TRAIN_EXTENDED: FRL training type Extended
+ */
+enum dp_pcon_frl_train_type {
+ DP_PCON_FRL_TRAIN_NORMAL = 0,
+ DP_PCON_FRL_TRAIN_EXTENDED = 1,
+};
+
+/**
+ * enum dp_pcon_frl_train_mode - drm DP PCON FRL Training Mode
+ *
+ * This enum is used to select mode for FRL Link bringup between an HDMI2.1
+ * PCON and an HDMI2.1 sink.
+ *
+ * It is based on VESA DP-to-HDMI Protocol Converter (PCON) Specification
+ * Sec 6.1 Table-3.
+ * In Concurrent Mode, the FRL link bring up can be done along with DP Link
+ * training. In Sequential mode, the FRL link bring up is done prior to the
+ * DP Link training.
+ *
+ * @DP_PCON_FRL_MODE_SEQUENTIAL: Sequential Training mode
+ * @DP_PCON_FRL_MODE_CONCURRENT: Concurrent Training mode
+ */
+
+enum dp_pcon_frl_train_mode {
+ DP_PCON_FRL_MODE_SEQUENTIAL = 0,
+ DP_PCON_FRL_MODE_CONCURRENT = 1,
+};
+
/**
* struct drm_dp_vsc_sdp - drm DP VSC SDP
*
@@ -2149,9 +2191,9 @@ int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd);
bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux);
int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
- bool concurrent_mode);
+ enum dp_pcon_frl_train_mode frl_mode);
int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
- bool extended_train_mode);
+ enum dp_pcon_frl_train_type frl_type);
int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux);
int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);
--
2.29.2
