On Thu, Feb 04, 2021 at 12:18:41PM +0530, Ankit Nautiyal wrote:
> Currently the FRL training mode (Concurrent, Sequential) and
> training type (Normal, Extended) are not defined properly and
> are passed as bool values in drm_helpers for pcon
> configuration for FRL training.
>
> This patch:
> -Defines FRL training type and link bring up sequence mode as enum.
> -Fixes the drm_helpers for FRL Training configuration to use these enums.
> -Modifies the calls to the above drm_helpers in i915/intel_dp as per the
> above change.
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 18 +++++-----
> drivers/gpu/drm/i915/display/intel_dp.c | 10 +++---
> include/drm/drm_dp_helper.h | 46 +++++++++++++++++++++++--
> 3 files changed, 56 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index eedbb48815b7..2ca4ab5af470 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -2635,14 +2635,13 @@ EXPORT_SYMBOL(drm_dp_pcon_is_frl_ready);
> * drm_dp_pcon_frl_configure_1() - Set HDMI LINK Configuration-Step1
> * @aux: DisplayPort AUX channel
> * @max_frl_gbps: maximum frl bw to be configured between PCON and HDMI sink
> - * @concurrent_mode: true if concurrent mode or operation is required,
> - * false otherwise.
> + * @frl_mode: FRL Training mode, it can be either Concurrent or Sequential.
> *
> * Returns 0 if success, else returns negative error code.
> */
>
> int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
> - bool concurrent_mode)
> + enum dp_pcon_frl_train_mode frl_mode)
> {
> int ret;
> u8 buf;
> @@ -2651,7 +2650,7 @@ int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
> if (ret < 0)
> return ret;
>
> - if (concurrent_mode)
> + if (frl_mode == DP_PCON_FRL_MODE_CONCURRENT)
> buf |= DP_PCON_ENABLE_CONCURRENT_LINK;
> else
> buf &= ~DP_PCON_ENABLE_CONCURRENT_LINK;
> @@ -2694,21 +2693,20 @@ EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1);
> * drm_dp_pcon_frl_configure_2() - Set HDMI Link configuration Step-2
> * @aux: DisplayPort AUX channel
> * @max_frl_mask : Max FRL BW to be tried by the PCON with HDMI Sink
> - * @extended_train_mode : true for Extended Mode, false for Normal Mode.
> - * In Normal mode, the PCON tries each frl bw from the max_frl_mask starting
> - * from min, and stops when link training is successful. In Extended mode, all
> - * frl bw selected in the mask are trained by the PCON.
> + * @frl_type : FRL training type, can be Extended, or Normal.
> *
> * Returns 0 if success, else returns negative error code.
> */
> int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
> - bool extended_train_mode)
> + enum dp_pcon_frl_train_type frl_type)
> {
> int ret;
> u8 buf = max_frl_mask;
>
> - if (extended_train_mode)
> + if (frl_type == DP_PCON_FRL_TRAIN_EXTENDED)
> buf |= DP_PCON_FRL_LINK_TRAIN_EXTENDED;
> + else
> + buf &= ~DP_PCON_FRL_LINK_TRAIN_EXTENDED;
These names are annoyingly close to each other. Prettu much
guaranteed to mix them up at some point. We should try to come
up something a bit more distinctive for the enum, or just forget
the enum and use the register values directly.
>
> ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf);
> if (ret < 0)
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 2b83f0f433a2..1962d6dd8641 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2560,10 +2560,6 @@ static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp)
>
> static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
> {
> -#define PCON_EXTENDED_TRAIN_MODE (1 > 0)
> -#define PCON_CONCURRENT_MODE (1 > 0)
> -#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE
> -#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE
> #define TIMEOUT_FRL_READY_MS 500
> #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
>
> @@ -2597,10 +2593,12 @@ static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
> return -ETIMEDOUT;
>
> max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw);
> - ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE);
> + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw,
> + DP_PCON_FRL_MODE_SEQUENTIAL);
> if (ret < 0)
> return ret;
> - ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE);
> + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask,
> + DP_PCON_FRL_TRAIN_NORMAL);
> if (ret < 0)
> return ret;
> ret = drm_dp_pcon_frl_enable(&intel_dp->aux);
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index edffd1dcca3e..c3f56e87a5ec 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1646,6 +1646,48 @@ enum dp_content_type {
> DP_CONTENT_TYPE_GAME = 0x04,
> };
>
> +/**
> + * enum dp_pcon_frl_train_type - drm DP PCON FRL Training Type
> + *
> + * This enum is used to select FRL training type for FRL training between
> + * an HDMI2.1 PCON and an HDMI2.1 sink.
> + *
> + * It is based on VESA DP-to-HDMI Protocol Converter (PCON) Specification
> + * Sec 6.1 Table-3.
> + * In Normal FRL training, the PCON tries each frl bw from the MAX FRL MASK
> + * starting from min, and stops when link training is successful.
> + * In Extended FRL training, all frl bw selected in the mask are trained by the
> + * PCON.
> + *
> + * @DP_PCON_FRL_TRAIN_NORMAL: FRL training type Normal
> + * @DP_PCON_FRL_TRAIN_EXTENDED: FRL training type Extended
> + */
> +enum dp_pcon_frl_train_type {
> + DP_PCON_FRL_TRAIN_NORMAL = 0,
> + DP_PCON_FRL_TRAIN_EXTENDED = 1,
> +};
> +
> +/**
> + * enum dp_pcon_frl_train_mode - drm DP PCON FRL Training Mode
> + *
> + * This enum is used to select mode for FRL Link bringup between an HDMI2.1
> + * PCON and an HDMI2.1 sink.
> + *
> + * It is based on VESA DP-to-HDMI Protocol Converter (PCON) Specification
> + * Sec 6.1 Table-3.
> + * In Concurrent Mode, the FRL link bring up can be done along with DP Link
> + * training. In Sequential mode, the FRL link bring up is done prior to the
> + * DP Link training.
> + *
> + * @DP_PCON_FRL_MODE_SEQUENTIAL: Sequential Training mode
> + * @DP_PCON_FRL_MODE_CONCURRENT: Concurrent Training mode
> + */
> +
> +enum dp_pcon_frl_train_mode {
> + DP_PCON_FRL_MODE_SEQUENTIAL = 0,
> + DP_PCON_FRL_MODE_CONCURRENT = 1,
> +};
> +
> /**
> * struct drm_dp_vsc_sdp - drm DP VSC SDP
> *
> @@ -2149,9 +2191,9 @@ int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd);
> bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux);
> int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
> - bool concurrent_mode);
> + enum dp_pcon_frl_train_mode frl_mode);
> int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
> - bool extended_train_mode);
> + enum dp_pcon_frl_train_type frl_type);
> int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux);
> int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);
>
> --
> 2.29.2
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
