On Fri, 2020-11-20 at 12:18 -0800, Lucas De Marchi wrote:
> On Tue, Nov 17, 2020 at 10:50:24AM -0800, Aditya Swarup wrote:
> > From: Caz Yokoyama <caz.yokoyama@xxxxxxxxx>
> >
> > The crwebview indicates on ADL-S that some of our MCHBAR
> > registers have moved from their traditional 0x50XX offsets to
> > new locations. The meaning and bit layout of the registers
> > remain same.
> >
> > Cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Imre Deak <imre.deak@xxxxxxxxx>
> > Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> > Signed-off-by: Yokoyama, Caz <caz.yokoyama@xxxxxxxxx>
> > Signed-off-by: Aditya Swarup <aditya.swarup@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 5 +++++
> > drivers/gpu/drm/i915/intel_dram.c | 18 +++++++++++++++---
> > 2 files changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index 4c8d0d84af6a..6abba59592f7 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -10863,6 +10863,8 @@ enum skl_power_gate {
> > #define SKL_DRAM_DDR_TYPE_LPDDR3 (2 << 0)
> > #define SKL_DRAM_DDR_TYPE_LPDDR4 (3 << 0)
> >
> > +#define ADLS_MAD_INTER_CHANNEL_0_0_0_MCHBAR
> > _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6048)
> > +
> > #define SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MI
> > RROR_BASE_SNB + 0x500C)
> > #define SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MI
> > RROR_BASE_SNB + 0x5010)
> > #define SKL_DRAM_S_SHIFT 16
> > @@ -10890,6 +10892,9 @@ enum skl_power_gate {
> > #define CNL_DRAM_RANK_3 (0x2 << 9)
> > #define CNL_DRAM_RANK_4 (0x3 << 9)
> >
> > +#define ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR _MMIO(MCHBAR_MI
> > RROR_BASE_SNB + 0x6054)
> > +#define ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR _MMIO(MCHBAR_MI
> > RROR_BASE_SNB + 0x6058)
> > +
> > /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using
> > this register,
> > * since on HSW we can't write to it using I915_WRITE. */
> > #define D_COMP_HSW _MMIO(MCHBAR_MIRROR_BASE_SNB +
> > 0x5F0C)
> > diff --git a/drivers/gpu/drm/i915/intel_dram.c
> > b/drivers/gpu/drm/i915/intel_dram.c
> > index 4754296a250e..e7427e5f4130 100644
> > --- a/drivers/gpu/drm/i915/intel_dram.c
> > +++ b/drivers/gpu/drm/i915/intel_dram.c
> > @@ -184,13 +184,21 @@ skl_dram_get_channels_info(struct
> > drm_i915_private *i915)
> > u32 val;
> > int ret;
> >
> > - val = intel_uncore_read(&i915->uncore,
> > + if (IS_ALDERLAKE_S(i915))
> > + val = intel_uncore_read(&i915->uncore,
> > + ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR);
> > + else
> > + val = intel_uncore_read(&i915->uncore,
> > SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
> > ret = skl_dram_get_channel_info(i915, &ch0, 0, val);
> > if (ret == 0)
> > dram_info->num_channels++;
> >
> > - val = intel_uncore_read(&i915->uncore,
> > + if (IS_ALDERLAKE_S(i915))
> > + val = intel_uncore_read(&i915->uncore,
> > + ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR);
> > + else
> > + val = intel_uncore_read(&i915->uncore,
> > SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
>
> probably better to:
>
> u32 ch0, ch1;
>
> and then keep the reads together in a single if/else chain.
> Or use i915_reg_t ch0_reg, ch1_reg
Agree/Better idea. When I worked for, I only concerned how to minimize
my patch and not think about whether the code is simple and readable.
-caz
>
> Lucas De Marchi
>
> > ret = skl_dram_get_channel_info(i915, &ch1, 1, val);
> > if (ret == 0)
> > @@ -231,7 +239,11 @@ skl_get_dram_type(struct drm_i915_private
> > *i915)
> > {
> > u32 val;
> >
> > - val = intel_uncore_read(&i915->uncore,
> > + if (IS_ALDERLAKE_S(i915))
> > + val = intel_uncore_read(&i915->uncore,
> > + ADLS_MAD_INTER_CHANNEL_0_0_0_MCHBAR);
> > + else
> > + val = intel_uncore_read(&i915->uncore,
> > SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMA
> > IN);
> >
> > switch (val & SKL_DRAM_DDR_TYPE_MASK) {
> > --
> > 2.27.0
> >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
