On Tue, Nov 17, 2020 at 10:50:24AM -0800, Aditya Swarup wrote:
From: Caz Yokoyama <caz.yokoyama@xxxxxxxxx>
The crwebview indicates on ADL-S that some of our MCHBAR
registers have moved from their traditional 0x50XX offsets to
new locations. The meaning and bit layout of the registers
remain same.
Cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
Signed-off-by: Yokoyama, Caz <caz.yokoyama@xxxxxxxxx>
Signed-off-by: Aditya Swarup <aditya.swarup@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++++
drivers/gpu/drm/i915/intel_dram.c | 18 +++++++++++++++---
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4c8d0d84af6a..6abba59592f7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -10863,6 +10863,8 @@ enum skl_power_gate {
#define SKL_DRAM_DDR_TYPE_LPDDR3 (2 << 0)
#define SKL_DRAM_DDR_TYPE_LPDDR4 (3 << 0)
+#define ADLS_MAD_INTER_CHANNEL_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6048)
+
#define SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x500C)
#define SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5010)
#define SKL_DRAM_S_SHIFT 16
@@ -10890,6 +10892,9 @@ enum skl_power_gate {
#define CNL_DRAM_RANK_3 (0x2 << 9)
#define CNL_DRAM_RANK_4 (0x3 << 9)
+#define ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6054)
+#define ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6058)
+
/* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
* since on HSW we can't write to it using I915_WRITE. */
#define D_COMP_HSW _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
index 4754296a250e..e7427e5f4130 100644
--- a/drivers/gpu/drm/i915/intel_dram.c
+++ b/drivers/gpu/drm/i915/intel_dram.c
@@ -184,13 +184,21 @@ skl_dram_get_channels_info(struct drm_i915_private *i915)
u32 val;
int ret;
- val = intel_uncore_read(&i915->uncore,
+ if (IS_ALDERLAKE_S(i915))
+ val = intel_uncore_read(&i915->uncore,
+ ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR);
+ else
+ val = intel_uncore_read(&i915->uncore,
SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
ret = skl_dram_get_channel_info(i915, &ch0, 0, val);
if (ret == 0)
dram_info->num_channels++;
- val = intel_uncore_read(&i915->uncore,
+ if (IS_ALDERLAKE_S(i915))
+ val = intel_uncore_read(&i915->uncore,
+ ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR);
+ else
+ val = intel_uncore_read(&i915->uncore,
SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
probably better to:
u32 ch0, ch1;
and then keep the reads together in a single if/else chain.
Or use i915_reg_t ch0_reg, ch1_reg
Lucas De Marchi
ret = skl_dram_get_channel_info(i915, &ch1, 1, val);
if (ret == 0)
@@ -231,7 +239,11 @@ skl_get_dram_type(struct drm_i915_private *i915)
{
u32 val;
- val = intel_uncore_read(&i915->uncore,
+ if (IS_ALDERLAKE_S(i915))
+ val = intel_uncore_read(&i915->uncore,
+ ADLS_MAD_INTER_CHANNEL_0_0_0_MCHBAR);
+ else
+ val = intel_uncore_read(&i915->uncore,
SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMAIN);
switch (val & SKL_DRAM_DDR_TYPE_MASK) {
--
2.27.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
