On Tue, Sep 08, 2020 at 02:04:56PM -0400, Lyude Paul wrote:
> On Fri, 2020-09-04 at 14:53 +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > Add helpers to get the TMDS clock limits for HDMI/DVI downstream
> > facing ports.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/drm_dp_helper.c | 116 ++++++++++++++++++++++++++++++++
> > include/drm/drm_dp_helper.h | 6 ++
> > 2 files changed, 122 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_dp_helper.c
> > b/drivers/gpu/drm/drm_dp_helper.c
> > index 822a30e609ef..f567428f2aef 100644
> > --- a/drivers/gpu/drm/drm_dp_helper.c
> > +++ b/drivers/gpu/drm/drm_dp_helper.c
> > @@ -643,6 +643,114 @@ int drm_dp_downstream_max_dotclock(const u8
> > dpcd[DP_RECEIVER_CAP_SIZE],
> > }
> > EXPORT_SYMBOL(drm_dp_downstream_max_dotclock);
> >
> > +/**
> > + * drm_dp_downstream_max_tmds_clock() - extract downstream facing port max
> > TMDS clock
> > + * @dpcd: DisplayPort configuration data
> > + * @port_cap: port capabilities
> > + * @edid: EDID
> > + *
> > + * Returns HDMI/DVI downstream facing port max TMDS clock in kHz on
> > success,
> > + * or 0 if max TMDS clock not defined
> > + */
> > +int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > + const u8 port_cap[4],
> > + const struct edid *edid)
> > +{
> > + if (!drm_dp_is_branch(dpcd))
> > + return 0;
> > +
> > + if (dpcd[DP_DPCD_REV] < 0x11) {
> > + switch (dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > DP_DWN_STRM_PORT_TYPE_MASK) {
> > + case DP_DWN_STRM_PORT_TYPE_TMDS:
> > + return 165000;
> > + default:
> > + return 0;
> > + }
> > + }
> > +
> > + switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) {
> > + case DP_DS_PORT_TYPE_DP_DUALMODE:
> > + if (is_edid_digital_input_dp(edid))
> > + return 0;
> > + /*
> > + * It's left up to the driver to check the
> > + * DP dual mode adapter's max TMDS clock.
> > + *
> > + * Unfortunatley it looks like branch devices
> > + * may not fordward that the DP dual mode i2c
> > + * access so we just usually get i2c nak :(
> > + */
> > + fallthrough;
> > + case DP_DS_PORT_TYPE_HDMI:
> > + /*
> > + * We should perhaps assume 165 MHz when detailed cap
> > + * info is not available. But looks like many typical
> > + * branch devices fall into that category and so we'd
> > + * probably end up with users complaining that they can't
> > + * get high resolution modes with their favorite dongle.
> > + *
> > + * So let's limit to 300 MHz instead since DPCD 1.4
> > + * HDMI 2.0 DFPs are required to have the detailed cap
> > + * info. So it's more likely we're dealing with a HDMI 1.4
> > + * compatible* device here.
> > + */
> > + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > DP_DETAILED_CAP_INFO_AVAILABLE) == 0)
> > + return 300000;
> > + return port_cap[1] * 2500;
> > + case DP_DS_PORT_TYPE_DVI:
> > + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > DP_DETAILED_CAP_INFO_AVAILABLE) == 0)
> > + return 165000;
> > + /* FIXME what to do about DVI dual link? */
> > + return port_cap[1] * 2500;
> > + default:
> > + return 0;
> > + }
> > +}
> > +EXPORT_SYMBOL(drm_dp_downstream_max_tmds_clock);
> > +
> > +/**
> > + * drm_dp_downstream_min_tmds_clock() - extract downstream facing port min
> > TMDS clock
> > + * @dpcd: DisplayPort configuration data
> > + * @port_cap: port capabilities
> > + * @edid: EDID
> > + *
> > + * Returns HDMI/DVI downstream facing port min TMDS clock in kHz on
> > success,
> > + * or 0 if max TMDS clock not defined
>
> s/max/min/
>
> Also, I would assume if callers are interested in min they're also interested
> in max and vice versa, would it maybe make sense to combine the min/max
> functions here?
Returning multiple things in C requires ugly stuff, so I try to avoid
it.
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
