Re: [PATCH v8 11/17] pwm: crc: Enable/disable PWM output on enable/disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Aug 30, 2020 at 02:57:47PM +0200, Hans de Goede wrote:
> The pwm-crc code is using 2 different enable bits:
> 1. bit 7 of the PWM0_CLK_DIV (PWM_OUTPUT_ENABLE)
> 2. bit 0 of the BACKLIGHT_EN register
> 
> So far we've kept the PWM_OUTPUT_ENABLE bit set when disabling the PWM,
> this commit makes crc_pwm_disable() clear it on disable and makes
> crc_pwm_enable() set it again on re-enable.
> 
> Acked-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> Changes in v3:
> - Remove paragraph about tri-stating the output from the commit message,
>   we don't have a datasheet so this was just an unfounded guess
> ---
>  drivers/pwm/pwm-crc.c | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Thierry Reding <thierry.reding@xxxxxxxxx>

Attachment: signature.asc
Description: PGP signature

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux