Re: [PATCH v5 07/22] drm/i915/dg1: Add and setup DPLLs for DG1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 24, 2020 at 02:39:03PM -0700, Lucas De Marchi wrote:
> From: Aditya Swarup <aditya.swarup@xxxxxxxxx>
> 
> Add entries for dg1 plls and setup dg1_pll_mgr to reuse icl callbacks.
> Initial setup for shared dplls DPLL0/1 for DDIA/B and DPLL2/3 for
> DDIC/D. Configure dpll cfgcrx registers to drive the plls on DG1.

As on the previous patch, let's use the DG1 "DDI-TC1" and "DDI-TC2"
terminology to avoid confusion (especially since the C/D here aren't
even the same as the PORT_D/PORT_E that they index as in the driver).

> 
> Signed-off-by: Aditya Swarup <aditya.swarup@xxxxxxxxx>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 41 +++++++++++++++++--
>  1 file changed, 37 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index 81ab975fe4f0..39a53aa0b233 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -3512,7 +3512,17 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
>  
>  	icl_calc_dpll_state(dev_priv, &pll_params, &port_dpll->hw_state);
>  
> -	if (IS_ROCKETLAKE(dev_priv)) {
> +	if (IS_DG1(dev_priv)) {
> +		if (port == PORT_D || port == PORT_E) {
> +			dpll_mask =
> +				BIT(DPLL_ID_DG1_DPLL2) |
> +				BIT(DPLL_ID_DG1_DPLL3);
> +		} else {
> +			dpll_mask =
> +				BIT(DPLL_ID_DG1_DPLL0) |
> +				BIT(DPLL_ID_DG1_DPLL1);
> +		}
> +	} else if (IS_ROCKETLAKE(dev_priv)) {
>  		dpll_mask =
>  			BIT(DPLL_ID_EHL_DPLL4) |
>  			BIT(DPLL_ID_ICL_DPLL1) |
> @@ -3808,7 +3818,10 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
>  	if (!(val & PLL_ENABLE))
>  		goto out;
>  
> -	if (IS_ROCKETLAKE(dev_priv)) {
> +	if (IS_DG1(dev_priv)) {
> +		hw_state->cfgcr0 = intel_de_read(dev_priv, DG1_DPLL_CFGCR0(id));
> +		hw_state->cfgcr1 = intel_de_read(dev_priv, DG1_DPLL_CFGCR1(id));
> +	} else if (IS_ROCKETLAKE(dev_priv)) {
>  		hw_state->cfgcr0 = intel_de_read(dev_priv,
>  						 RKL_DPLL_CFGCR0(id));
>  		hw_state->cfgcr1 = intel_de_read(dev_priv,
> @@ -3866,7 +3879,10 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
>  	const enum intel_dpll_id id = pll->info->id;
>  	i915_reg_t cfgcr0_reg, cfgcr1_reg;
>  
> -	if (IS_ROCKETLAKE(dev_priv)) {
> +	if (IS_DG1(dev_priv)) {
> +		cfgcr0_reg = DG1_DPLL_CFGCR0(id);
> +		cfgcr1_reg = DG1_DPLL_CFGCR1(id);
> +	} else if (IS_ROCKETLAKE(dev_priv)) {
>  		cfgcr0_reg = RKL_DPLL_CFGCR0(id);
>  		cfgcr1_reg = RKL_DPLL_CFGCR1(id);
>  	} else if (INTEL_GEN(dev_priv) >= 12) {
> @@ -4316,6 +4332,21 @@ static const struct intel_dpll_mgr rkl_pll_mgr = {
>  	.dump_hw_state = icl_dump_hw_state,
>  };
>  
> +static const struct dpll_info dg1_plls[] = {
> +	{ "DPLL 0", &combo_pll_funcs, DPLL_ID_DG1_DPLL0, 0 },
> +	{ "DPLL 1", &combo_pll_funcs, DPLL_ID_DG1_DPLL1, 0 },
> +	{ "DPLL 2", &combo_pll_funcs, DPLL_ID_DG1_DPLL2, 0 },
> +	{ "DPLL 3", &combo_pll_funcs, DPLL_ID_DG1_DPLL3, 0 },
> +	{ },
> +};
> +
> +static const struct intel_dpll_mgr dg1_pll_mgr = {
> +	.dpll_info = dg1_plls,
> +	.get_dplls = icl_get_dplls,
> +	.put_dplls = icl_put_dplls,
> +	.dump_hw_state = icl_dump_hw_state,

Do we also need a

        .update_ref_clks = icl_update_dpll_ref_clks,

here?  That's a new hook as of ccc495fd7ac3 ("drm/i915: Unify the DPLL
ref clock frequency tracking").


Matt

> +};
> +
>  /**
>   * intel_shared_dpll_init - Initialize shared DPLLs
>   * @dev: drm device
> @@ -4329,7 +4360,9 @@ void intel_shared_dpll_init(struct drm_device *dev)
>  	const struct dpll_info *dpll_info;
>  	int i;
>  
> -	if (IS_ROCKETLAKE(dev_priv))
> +	if (IS_DG1(dev_priv))
> +		dpll_mgr = &dg1_pll_mgr;
> +	else if (IS_ROCKETLAKE(dev_priv))
>  		dpll_mgr = &rkl_pll_mgr;
>  	else if (INTEL_GEN(dev_priv) >= 12)
>  		dpll_mgr = &tgl_pll_mgr;
> -- 
> 2.26.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux