On Wed, Jun 10, 2020 at 01:09:36PM +0300, Imre Deak wrote:
> On Wed, Jun 10, 2020 at 11:03:04AM +0300, Lisovskiy, Stanislav wrote:
> > On Mon, Jun 08, 2020 at 12:25:21AM +0300, Imre Deak wrote:
> > > During the initial MST probing an MST port's I2C device will be
> > > registered using the kdev of the DRM device as a parent. Later after MST
> > > Connection Status Notifications this I2C device will be re-registered
> > > with the kdev of the port's connector. This will also move
> > > inconsistently the I2C device's sysfs entry from the DRM device's sysfs
> > > dir to the connector's dir.
> > >
> > > Fix the above by keeping the DRM kdev as the parent of the I2C device.
> > >
> > > Ideally the connector's kdev would be used as a parent, similarly to
> > > non-MST connectors, however that needs some more refactoring to ensure
> > > the connector's kdev is already available early enough. So keep the
> > > existing (initial) behavior for now.
> > >
> > > Cc: <stable@xxxxxxxxxxxxxxx>
> > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/drm_dp_mst_topology.c | 28 +++++++++++++++------------
> > > 1 file changed, 16 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> > > index 02c800b8199f..083255c33ee0 100644
> > > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > > @@ -88,8 +88,8 @@ static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
> > > static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,
> > > u8 *guid);
> > >
> > > -static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux);
> > > -static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux);
> > > +static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port);
> > > +static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port);
> > > static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
> > >
> > > #define DBG_PREFIX "[dp_mst]"
> > > @@ -1993,7 +1993,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
> > > }
> > >
> > > /* remove i2c over sideband */
> > > - drm_dp_mst_unregister_i2c_bus(&port->aux);
> > > + drm_dp_mst_unregister_i2c_bus(port);
> > > } else {
> > > mutex_lock(&mgr->lock);
> > > drm_dp_mst_topology_put_mstb(port->mstb);
> > > @@ -2008,7 +2008,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
> > > if (port->pdt != DP_PEER_DEVICE_NONE) {
> > > if (drm_dp_mst_is_end_device(port->pdt, port->mcs)) {
> > > /* add i2c over sideband */
> > > - ret = drm_dp_mst_register_i2c_bus(&port->aux);
> > > + ret = drm_dp_mst_register_i2c_bus(port);
> > > } else {
> > > lct = drm_dp_calculate_rad(port, rad);
> > > mstb = drm_dp_add_mst_branch_device(lct, rad);
> > > @@ -5375,22 +5375,26 @@ static const struct i2c_algorithm drm_dp_mst_i2c_algo = {
> > >
> > > /**
> > > * drm_dp_mst_register_i2c_bus() - register an I2C adapter for I2C-over-AUX
> > > - * @aux: DisplayPort AUX channel
> > > + * @port: The port to add the I2C bus on
> > > *
> > > * Returns 0 on success or a negative error code on failure.
> > > */
> > > -static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
> > > +static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port)
> > > {
> > > + struct drm_dp_aux *aux = &port->aux;
> > > + struct device *parent_dev = port->mgr->dev->dev;
> > > +
> >
> > So are we sure that this will always give us thr kdev of the drm device?
> > I mean could there be more complex hierarchy? Just wondering if there is
> > a way to get drm device kdev in a more explicit way.
>
> There is a single mgr per DRM driver (kdev) and port objects created by
> a given DRM driver will stay owned by the same DRM driver. So the
> kdev->port association is static.
Ok, thanks for clarification. lgtm then.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
>
> > > aux->ddc.algo = &drm_dp_mst_i2c_algo;
> > > aux->ddc.algo_data = aux;
> > > aux->ddc.retries = 3;
> > >
> > > aux->ddc.class = I2C_CLASS_DDC;
> > > aux->ddc.owner = THIS_MODULE;
> > > - aux->ddc.dev.parent = aux->dev;
> > > - aux->ddc.dev.of_node = aux->dev->of_node;
> > > + /* FIXME: set the kdev of the port's connector as parent */
> > > + aux->ddc.dev.parent = parent_dev;
> > > + aux->ddc.dev.of_node = parent_dev->of_node;
> > >
> > > - strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(aux->dev),
> > > + strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(parent_dev),
> > > sizeof(aux->ddc.name));
> > >
> > > return i2c_add_adapter(&aux->ddc);
> > > @@ -5398,11 +5402,11 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
> > >
> > > /**
> > > * drm_dp_mst_unregister_i2c_bus() - unregister an I2C-over-AUX adapter
> > > - * @aux: DisplayPort AUX channel
> > > + * @port: The port to remove the I2C bus from
> > > */
> > > -static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux)
> > > +static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port)
> > > {
> > > - i2c_del_adapter(&aux->ddc);
> > > + i2c_del_adapter(&port->aux.ddc);
> > > }
> > >
> > > /**
> > > --
> > > 2.23.1
> > >
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
