Re: [PATCH 2/3] drm/dp_mst: Fix the DDC I2C device registration of an MST port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 10, 2020 at 11:03:04AM +0300, Lisovskiy, Stanislav wrote:
> On Mon, Jun 08, 2020 at 12:25:21AM +0300, Imre Deak wrote:
> > During the initial MST probing an MST port's I2C device will be
> > registered using the kdev of the DRM device as a parent. Later after MST
> > Connection Status Notifications this I2C device will be re-registered
> > with the kdev of the port's connector. This will also move
> > inconsistently the I2C device's sysfs entry from the DRM device's sysfs
> > dir to the connector's dir.
> > 
> > Fix the above by keeping the DRM kdev as the parent of the I2C device.
> > 
> > Ideally the connector's kdev would be used as a parent, similarly to
> > non-MST connectors, however that needs some more refactoring to ensure
> > the connector's kdev is already available early enough. So keep the
> > existing (initial) behavior for now.
> > 
> > Cc: <stable@xxxxxxxxxxxxxxx>
> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/drm_dp_mst_topology.c | 28 +++++++++++++++------------
> >  1 file changed, 16 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> > index 02c800b8199f..083255c33ee0 100644
> > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > @@ -88,8 +88,8 @@ static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
> >  static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,
> >  				 u8 *guid);
> >  
> > -static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux);
> > -static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux);
> > +static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port);
> > +static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port);
> >  static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
> >  
> >  #define DBG_PREFIX "[dp_mst]"
> > @@ -1993,7 +1993,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
> >  			}
> >  
> >  			/* remove i2c over sideband */
> > -			drm_dp_mst_unregister_i2c_bus(&port->aux);
> > +			drm_dp_mst_unregister_i2c_bus(port);
> >  		} else {
> >  			mutex_lock(&mgr->lock);
> >  			drm_dp_mst_topology_put_mstb(port->mstb);
> > @@ -2008,7 +2008,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
> >  	if (port->pdt != DP_PEER_DEVICE_NONE) {
> >  		if (drm_dp_mst_is_end_device(port->pdt, port->mcs)) {
> >  			/* add i2c over sideband */
> > -			ret = drm_dp_mst_register_i2c_bus(&port->aux);
> > +			ret = drm_dp_mst_register_i2c_bus(port);
> >  		} else {
> >  			lct = drm_dp_calculate_rad(port, rad);
> >  			mstb = drm_dp_add_mst_branch_device(lct, rad);
> > @@ -5375,22 +5375,26 @@ static const struct i2c_algorithm drm_dp_mst_i2c_algo = {
> >  
> >  /**
> >   * drm_dp_mst_register_i2c_bus() - register an I2C adapter for I2C-over-AUX
> > - * @aux: DisplayPort AUX channel
> > + * @port: The port to add the I2C bus on
> >   *
> >   * Returns 0 on success or a negative error code on failure.
> >   */
> > -static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
> > +static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port)
> >  {
> > +	struct drm_dp_aux *aux = &port->aux;
> > +	struct device *parent_dev = port->mgr->dev->dev;
> > +
> 
> So are we sure that this will always give us thr kdev of the drm device?
> I mean could there be more complex hierarchy? Just wondering if there is 
> a way to get drm device kdev in a more explicit way.

There is a single mgr per DRM driver (kdev) and port objects created by
a given DRM driver will stay owned by the same DRM driver. So the
kdev->port association is static.

> >  	aux->ddc.algo = &drm_dp_mst_i2c_algo;
> >  	aux->ddc.algo_data = aux;
> >  	aux->ddc.retries = 3;
> >  
> >  	aux->ddc.class = I2C_CLASS_DDC;
> >  	aux->ddc.owner = THIS_MODULE;
> > -	aux->ddc.dev.parent = aux->dev;
> > -	aux->ddc.dev.of_node = aux->dev->of_node;
> > +	/* FIXME: set the kdev of the port's connector as parent */
> > +	aux->ddc.dev.parent = parent_dev;
> > +	aux->ddc.dev.of_node = parent_dev->of_node;
> >  
> > -	strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(aux->dev),
> > +	strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(parent_dev),
> >  		sizeof(aux->ddc.name));
> >  
> >  	return i2c_add_adapter(&aux->ddc);
> > @@ -5398,11 +5402,11 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux)
> >  
> >  /**
> >   * drm_dp_mst_unregister_i2c_bus() - unregister an I2C-over-AUX adapter
> > - * @aux: DisplayPort AUX channel
> > + * @port: The port to remove the I2C bus from
> >   */
> > -static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux)
> > +static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port)
> >  {
> > -	i2c_del_adapter(&aux->ddc);
> > +	i2c_del_adapter(&port->aux.ddc);
> >  }
> >  
> >  /**
> > -- 
> > 2.23.1
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux