Re: [PATCH 04/36] drm/i915: Trim the ironlake+ irq handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Mika Kuoppala (2020-06-01 12:49:49)
> Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> writes:
> 
> > Ever noticed that our interrupt handlers are where we spend most of our
> > time on a busy system? In part this is unavoidable as each interrupt
> > requires to poll and reset several registers, but we can try and so as
> > efficiently as possible.
> >
> > Function                                     old     new   delta
> > ilk_irq_handler                             2317    2156    -161
> >
> > Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/i915_irq.c | 59 ++++++++++++++++-----------------
> >  1 file changed, 28 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index 63579ab71cf6..07c0c7ea3795 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -2097,69 +2097,66 @@ static void ivb_display_irq_handler(struct drm_i915_private *dev_priv,
> >   */
> >  static irqreturn_t ilk_irq_handler(int irq, void *arg)
> >  {
> > -     struct drm_i915_private *dev_priv = arg;
> > +     struct drm_i915_private *i915 = arg;
> > +     void __iomem * const regs = i915->uncore.regs;
> >       u32 de_iir, gt_iir, de_ier, sde_ier = 0;
> > -     irqreturn_t ret = IRQ_NONE;
> >  
> > -     if (!intel_irqs_enabled(dev_priv))
> > +     if (!unlikely(intel_irqs_enabled(i915)))
> 
> Put ! inside the unlikely for readability please.
> 
> >               return IRQ_NONE;
> >  
> >       /* IRQs are synced during runtime_suspend, we don't require a wakeref */
> > -     disable_rpm_wakeref_asserts(&dev_priv->runtime_pm);
> > +     disable_rpm_wakeref_asserts(&i915->runtime_pm);
> >  
> >       /* disable master interrupt before clearing iir  */
> > -     de_ier = I915_READ(DEIER);
> > -     I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
> > +     de_ier = raw_reg_read(regs, DEIER);
> > +     raw_reg_write(regs, DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
> >  
> >       /* Disable south interrupts. We'll only write to SDEIIR once, so further
> >        * interrupts will will be stored on its back queue, and then we'll be
> >        * able to process them after we restore SDEIER (as soon as we restore
> >        * it, we'll get an interrupt if SDEIIR still has something to process
> >        * due to its back queue). */
> > -     if (!HAS_PCH_NOP(dev_priv)) {
> > -             sde_ier = I915_READ(SDEIER);
> > -             I915_WRITE(SDEIER, 0);
> > +     if (!HAS_PCH_NOP(i915)) {
> > +             sde_ier = raw_reg_read(regs, SDEIER);
> > +             raw_reg_write(regs, SDEIER, 0);
> >       }
> >  
> >       /* Find, clear, then process each source of interrupt */
> >  
> > -     gt_iir = I915_READ(GTIIR);
> > +     gt_iir = raw_reg_read(regs, GTIIR);
> >       if (gt_iir) {
> > -             I915_WRITE(GTIIR, gt_iir);
> > -             ret = IRQ_HANDLED;
> > -             if (INTEL_GEN(dev_priv) >= 6)
> > -                     gen6_gt_irq_handler(&dev_priv->gt, gt_iir);
> > +             raw_reg_write(regs, GTIIR, gt_iir);
> > +             if (INTEL_GEN(i915) >= 6)
> > +                     gen6_gt_irq_handler(&i915->gt, gt_iir);
> >               else
> > -                     gen5_gt_irq_handler(&dev_priv->gt, gt_iir);
> > +                     gen5_gt_irq_handler(&i915->gt, gt_iir);
> >       }
> >  
> > -     de_iir = I915_READ(DEIIR);
> > +     de_iir = raw_reg_read(regs, DEIIR);
> >       if (de_iir) {
> > -             I915_WRITE(DEIIR, de_iir);
> > -             ret = IRQ_HANDLED;
> > -             if (INTEL_GEN(dev_priv) >= 7)
> > -                     ivb_display_irq_handler(dev_priv, de_iir);
> > +             raw_reg_write(regs, DEIIR, de_iir);
> > +             if (INTEL_GEN(i915) >= 7)
> > +                     ivb_display_irq_handler(i915, de_iir);
> >               else
> > -                     ilk_display_irq_handler(dev_priv, de_iir);
> > +                     ilk_display_irq_handler(i915, de_iir);
> >       }
> >  
> > -     if (INTEL_GEN(dev_priv) >= 6) {
> > -             u32 pm_iir = I915_READ(GEN6_PMIIR);
> > +     if (INTEL_GEN(i915) >= 6) {
> > +             u32 pm_iir = raw_reg_read(regs, GEN6_PMIIR);
> >               if (pm_iir) {
> > -                     I915_WRITE(GEN6_PMIIR, pm_iir);
> > -                     ret = IRQ_HANDLED;
> > -                     gen6_rps_irq_handler(&dev_priv->gt.rps, pm_iir);
> > +                     raw_reg_write(regs, GEN6_PMIIR, pm_iir);
> > +                     gen6_rps_irq_handler(&i915->gt.rps, pm_iir);
> >               }
> >       }
> >  
> > -     I915_WRITE(DEIER, de_ier);
> > -     if (!HAS_PCH_NOP(dev_priv))
> > -             I915_WRITE(SDEIER, sde_ier);
> > +     raw_reg_write(regs, DEIER, de_ier);
> > +     if (sde_ier)
> > +             raw_reg_write(regs, SDEIER, sde_ier);
> >  
> >       /* IRQs are synced during runtime_suspend, we don't require a wakeref */
> > -     enable_rpm_wakeref_asserts(&dev_priv->runtime_pm);
> > +     enable_rpm_wakeref_asserts(&i915->runtime_pm);
> >  
> > -     return ret;
> > +     return IRQ_HANDLED;
> 
> Change in here is that if we catch a intr without any work, we now
> return handled instead of none. 
> 
> And as we have not actually done anything to prevent the next
> one to kicking off, this is potentially dangerous.
> 
> But we explicitly clear the enables tho, but is it enough?

It's MSI-X, to get here means there was an interrupt. Let's check how
much it adds to track IRQ_HANDLED.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux