From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Document the fact that we aren't reading out the actual FSB frequency but rather just the state of the FSB straps. Some BIOSen allow you to configure the two independently. So if someone sets the two up in an inconsistent manner we'll get the wrong answer here and thus will end up with incorrect aux/pps clock dividers. Alas, proper docs are no longer around so we can't do any better. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_cdclk.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c index c17cf611625c..d57dfec7e9a5 100644 --- a/drivers/gpu/drm/i915/display/intel_cdclk.c +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c @@ -2704,7 +2704,16 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv) { u32 clkcfg; - /* hrawclock is 1/4 the FSB frequency */ + /* + * hrawclock is 1/4 the FSB frequency + * + * Note that this only reads the state of the FSB + * straps, not the actual FSB frequency. Some BIOSen + * let you configure each independently. Ideally we'd + * read out the actual FSB frequency but sadly we + * don't know which registers have that information, + * and all the relevant docs have gone to bit heaven :( + */ clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK; /* ELK seems to redefine some of the values */ -- 2.26.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx