>
> > -----Original Message-----
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Sent: Wednesday, April 8, 2020 6:17 PM
> > To: Kadiyala, Kishore <kishore.kadiyala@xxxxxxxxx>
> > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Shankar, Uma
> > <uma.shankar@xxxxxxxxx>; Nikula, Jani <jani.nikula@xxxxxxxxx>
> > Subject: Re: [PATCH v3] drm/i915: Add Plane color encoding support for
> > YCBCR_BT2020
> >
> > On Wed, Apr 08, 2020 at 04:43:47PM +0530, Kishore Kadiyala wrote:
> > > Currently the plane property doesn't have support for YCBCR_BT2020,
> > > which enables the corresponding color conversion mode on plane CSC.
> > > In ICL+ platforms , this property setting is confined only to HDR
> > > Planes as there is limitation in SDR Planes and while in GLK it set
> > > for all planes.
> > >
> > > V2: Enabling support for YCBCT_BT2020 for HDR planes on
> > > platforms GLK & ICL
> > >
> > > V3: Refined the condition check to handle GLK & ICL+ HDR planes
> > > Also added BT2020 handling in glk_plane_color_ctl.
> > >
> > > Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Cc: Uma Shankar <uma.shankar@xxxxxxxxx>
> > > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > > Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++++---
> > > drivers/gpu/drm/i915/display/intel_sprite.c | 17 +++++++++++++++--
> > > 2 files changed, 24 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > index 70ec301fe6e3..f2dfa61a49fa 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -4808,11 +4808,17 @@ u32 glk_plane_color_ctl(const struct
> > > intel_crtc_state
> > *crtc_state,
> > > plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
> > >
> > > if (fb->format->is_yuv && !icl_is_hdr_plane(dev_priv, plane->id)) {
> > > - if (plane_state->hw.color_encoding ==
> > DRM_COLOR_YCBCR_BT709)
> > > + switch (plane_state->hw.color_encoding) {
> > > + case DRM_COLOR_YCBCR_BT709:
> > > plane_color_ctl |=
> > PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> > > - else
> > > + break;
> > > + case DRM_COLOR_YCBCR_BT2020:
> > > + plane_color_ctl |=
> > > +
> > PLANE_COLOR_CSC_MODE_YUV2020_TO_RGB2020;
> > > + break;
> > > + default:
> > > plane_color_ctl |=
> > PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
> > > -
> > > + }
> > > if (plane_state->hw.color_range ==
> > DRM_COLOR_YCBCR_FULL_RANGE)
> > > plane_color_ctl |=
> > PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> > > } else if (fb->format->is_yuv) {
> > > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > index deda351719db..237c4b951f02 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > > @@ -3031,6 +3031,7 @@ skl_universal_plane_create(struct
> > > drm_i915_private
> > *dev_priv,
> > > struct intel_plane *plane;
> > > enum drm_plane_type plane_type;
> > > unsigned int supported_rotations;
> > > + unsigned int supported_csc;
> > > const u64 *modifiers;
> > > const u32 *formats;
> > > int num_formats;
> > > @@ -3105,9 +3106,21 @@ skl_universal_plane_create(struct
> > > drm_i915_private
> > *dev_priv,
> > > DRM_MODE_ROTATE_0,
> > > supported_rotations);
> > >
> > > + supported_csc = BIT(DRM_COLOR_YCBCR_BT601) |
> > > +BIT(DRM_COLOR_YCBCR_BT709);
> > > +
> > > + /*
> > > + * Setting the CSC BT2020 for all the planes in case of GLK
> > > + * While for ICL+ platforms it is set only for HDR planes 1 through 3
> > > + * as there are issues seen with SDR planes
> >
> > What issues are those?
>
> There was an issue on some of the hardcoded matrix values used in SDR planes,
> hence it would be good to not enable BT2020 conversion on SDR planes in ICL+ till
> this gets resolved.
> Reference WA: #220884772
> "Incorrect plane CSC coefficients for sRGB to Bt2020 :
> SDR planes PLANE_COLOR_CTL Plane CSC Mode 100b, RGB709 to RGB2020, uses
> hardcoded R-Y coefficient of 0.75 instead of 0.625, resulting in incorrect BT2020
> color conversion. WA: Limit RGB709 to RGB2020 conversion to the HDR capable
> planes"
Also this is applicable only for ICL, so we can enable this from gen12 onwards.
> @Kishore : Please add this as comment here.
>
> > > + */
> > > + if ((INTEL_GEN(dev_priv) == 10) || IS_GEMINILAKE(dev_priv))
> > > + supported_csc |= BIT(DRM_COLOR_YCBCR_BT2020);
> > > + else
> > > + if (icl_is_hdr_plane(dev_priv, plane_id))
> > > + supported_csc |= BIT(DRM_COLOR_YCBCR_BT2020);
> > > +
> > > drm_plane_create_color_properties(&plane->base,
> > > - BIT(DRM_COLOR_YCBCR_BT601) |
> > > - BIT(DRM_COLOR_YCBCR_BT709),
> > > + supported_csc,
> > >
> > BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) |
> > > BIT(DRM_COLOR_YCBCR_FULL_RANGE),
> > > DRM_COLOR_YCBCR_BT709,
> > > --
> > > 2.17.1
> >
> > --
> > Ville Syrjälä
> > Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
