DP_COMP_CTL and DP_COMP_PAT register used to program DP
compliance pattern.
v1: Initial patch.
v2: used pipe instead of port in macro definition. [Manasi]
v3: used trans_offset for offset calculation. [Manasi]
v4: Used MMIO_PIPE for evenly spaced register offset instead
MMIO_PIPE2. [Ville]
Reviewed-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 309cb7d96b35..465862ed2cf8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9792,6 +9792,24 @@ enum skl_power_gate {
#define DDI_BUF_BALANCE_LEG_ENABLE (1 << 31)
#define DDI_BUF_TRANS_HI(port, i) _MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8 + 4)
+/* DDI DP Compliance Control */
+#define _DDI_DP_COMP_CTL_A 0x605F0
+#define _DDI_DP_COMP_CTL_B 0x615F0
+#define DDI_DP_COMP_CTL(pipe) _MMIO_PIPE(pipe, _DDI_DP_COMP_CTL_A, _DDI_DP_COMP_CTL_B)
+#define DDI_DP_COMP_CTL_ENABLE (1 << 31)
+#define DDI_DP_COMP_CTL_D10_2 (0 << 28)
+#define DDI_DP_COMP_CTL_SCRAMBLED_0 (1 << 28)
+#define DDI_DP_COMP_CTL_PRBS7 (2 << 28)
+#define DDI_DP_COMP_CTL_CUSTOM80 (3 << 28)
+#define DDI_DP_COMP_CTL_HBR2 (4 << 28)
+#define DDI_DP_COMP_CTL_SCRAMBLED_1 (5 << 28)
+#define DDI_DP_COMP_CTL_HBR2_RESET (0xFC << 0)
+
+/* DDI DP Compliance Pattern */
+#define _DDI_DP_COMP_PAT_A 0x605F4
+#define _DDI_DP_COMP_PAT_B 0x615F4
+#define DDI_DP_COMP_PAT(pipe, i) _MMIO(_PIPE(pipe, _DDI_DP_COMP_PAT_A, _DDI_DP_COMP_PAT_B) + (i) * 4)
+
/* Sideband Interface (SBI) is programmed indirectly, via
* SBI_ADDR, which contains the register offset; and SBI_DATA,
* which contains the payload */
--
2.24.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
