On Tue, Feb 04, 2020 at 05:48:24PM +0000, Souza, Jose wrote:
> On Tue, 2020-02-04 at 15:35 +0200, Ville Syrjälä wrote:
> > On Mon, Feb 03, 2020 at 02:55:49PM -0800, José Roberto de Souza
> > wrote:
> > > TGL is suffering of timeouts and fifo underruns when disabling
> > > transcoder in MST mode, this is fixed by set TRANS_DDI_MODE_SELECT
> > > to
> > > 0(HDMI mode) when clearing DDI select.
> > >
> > > Although BSpec disable sequence don't require this step, it is a
> > > harmless change and it is also done by Windows driver.
> > > Anyhow HW team was notified about that but it can take some time to
> > > documentation to be updated.
> > >
> > > A case that always lead to those issues is:
> > > - do a modeset enabling pipe A and pipe B in the same MST stream
> > > leaving A as master
> > > - disable pipe A, promote B as master doing a full modeset in A
> > > - enable pipe A, changing the master transcoder back to A(doing a
> > > full modeset in B)
> > > - Pow: underruns and timeouts
> > >
> > > The transcoders involved will only work again when complete
> > > disabled
> > > and their power wells turned off causing a reset in their
> > > registers.
> > >
> > > v2: Setting TRANS_DDI_MODE_SELECT to default when clearing DDI
> > > select
> > > not anymore when disabling TRANS_DDI, both work but this one looks
> > > more safe. (Ville comment)
> >
> > I presume this still fixes the issue?
>
> It does.
>
> >
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_ddi.c | 7 +++++--
> > > 1 file changed, 5 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > index aa066fb9eb00..45082e71262c 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > @@ -1988,10 +1988,12 @@ void
> > > intel_ddi_disable_transcoder_func(const struct intel_crtc_state
> > > *crtc_state
> > > val &= ~TRANS_DDI_FUNC_ENABLE;
> > >
> > > if (INTEL_GEN(dev_priv) >= 12) {
> > > - if (!intel_dp_mst_is_master_trans(crtc_state))
> > > + if (!intel_dp_mst_is_master_trans(crtc_state)) {
> > > val &= ~TGL_TRANS_DDI_PORT_MASK;
> > > + val &= ~TRANS_DDI_MODE_SELECT_MASK;
> >
> > Two separate statements.
> >
> > > + }
> > > } else {
> > > - val &= ~TRANS_DDI_PORT_MASK;
> > > + val &= ~(TRANS_DDI_PORT_MASK |
> > > TRANS_DDI_MODE_SELECT_MASK);
> >
> > One statement.
>
> Here was the only place that fitted in 80 cols.
'\n' is a thing.
val &= ~(A |
B);
>
> >
> > > }
> > > intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder),
> > > val);
> > >
> > > @@ -3729,6 +3731,7 @@ static void intel_ddi_post_disable_dp(struct
> > > intel_encoder *encoder,
> > > val = intel_de_read(dev_priv,
> > > TRANS_DDI_FUNC_CTL(cpu_tran
> > > scoder));
> > > val &= ~TGL_TRANS_DDI_PORT_MASK;
> > > + val &= ~TRANS_DDI_MODE_SELECT_MASK;
> >
> > Two again.
> >
> > A bit inconsistent, otherwise lgtm.
> >
> > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Thanks
>
> >
> > > intel_de_write(dev_priv,
> > > TRANS_DDI_FUNC_CTL(cpu_transcode
> > > r),
> > > val);
> > > --
> > > 2.25.0
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
