Re: [PATCH v2] drm/i915/display: Set TRANS_DDI_MODE_SELECT to default value when clearing DDI select

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2020-02-04 at 15:35 +0200, Ville Syrjälä wrote:
> On Mon, Feb 03, 2020 at 02:55:49PM -0800, José Roberto de Souza
> wrote:
> > TGL is suffering of timeouts and fifo underruns when disabling
> > transcoder in MST mode, this is fixed by set TRANS_DDI_MODE_SELECT
> > to
> > 0(HDMI mode) when clearing DDI select.
> > 
> > Although BSpec disable sequence don't require this step, it is a
> > harmless change and it is also done by Windows driver.
> > Anyhow HW team was notified about that but it can take some time to
> > documentation to be updated.
> > 
> > A case that always lead to those issues is:
> > - do a modeset enabling pipe A and pipe B in the same MST stream
> > leaving A as master
> > - disable pipe A, promote B as master doing a full modeset in A
> > - enable pipe A, changing the master transcoder back to A(doing a
> > full modeset in B)
> > - Pow: underruns and timeouts
> > 
> > The transcoders involved will only work again when complete
> > disabled
> > and their power wells turned off causing a reset in their
> > registers.
> > 
> > v2: Setting TRANS_DDI_MODE_SELECT to default when clearing DDI
> > select
> > not anymore when disabling TRANS_DDI, both work but this one looks
> > more safe. (Ville comment)
> 
> I presume this still fixes the issue?

It does.

> 
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/display/intel_ddi.c | 7 +++++--
> >  1 file changed, 5 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index aa066fb9eb00..45082e71262c 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -1988,10 +1988,12 @@ void
> > intel_ddi_disable_transcoder_func(const struct intel_crtc_state
> > *crtc_state
> >  	val &= ~TRANS_DDI_FUNC_ENABLE;
> >  
> >  	if (INTEL_GEN(dev_priv) >= 12) {
> > -		if (!intel_dp_mst_is_master_trans(crtc_state))
> > +		if (!intel_dp_mst_is_master_trans(crtc_state)) {
> >  			val &= ~TGL_TRANS_DDI_PORT_MASK;
> > +			val &= ~TRANS_DDI_MODE_SELECT_MASK;
> 
> Two separate statements.
> 
> > +		}
> >  	} else {
> > -		val &= ~TRANS_DDI_PORT_MASK;
> > +		val &= ~(TRANS_DDI_PORT_MASK |
> > TRANS_DDI_MODE_SELECT_MASK);
> 
> One statement.

Here was the only place that fitted in 80 cols.

> 
> >  	}
> >  	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder),
> > val);
> >  
> > @@ -3729,6 +3731,7 @@ static void intel_ddi_post_disable_dp(struct
> > intel_encoder *encoder,
> >  			val = intel_de_read(dev_priv,
> >  					    TRANS_DDI_FUNC_CTL(cpu_tran
> > scoder));
> >  			val &= ~TGL_TRANS_DDI_PORT_MASK;
> > +			val &= ~TRANS_DDI_MODE_SELECT_MASK;
> 
> Two again.
> 
> A bit inconsistent, otherwise lgtm.
> 
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Thanks

> 
> >  			intel_de_write(dev_priv,
> >  				       TRANS_DDI_FUNC_CTL(cpu_transcode
> > r),
> >  				       val);
> > -- 
> > 2.25.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux