Move away from I915_READ_FW() and I915_WRITE_FW() in display code, and
switch to using intel_de_read_fw() and intel_de_write_fw(),
respectively. Also switch I915_READ() and I915_WRITE() over in this file
while at it.
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_gmbus.c | 74 ++++++++++------------
1 file changed, 35 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c
index 3d4d19ac1d14..508308555dc6 100644
--- a/drivers/gpu/drm/i915/display/intel_gmbus.c
+++ b/drivers/gpu/drm/i915/display/intel_gmbus.c
@@ -143,8 +143,8 @@ to_intel_gmbus(struct i2c_adapter *i2c)
void
intel_gmbus_reset(struct drm_i915_private *dev_priv)
{
- I915_WRITE(GMBUS0, 0);
- I915_WRITE(GMBUS4, 0);
+ intel_de_write(dev_priv, GMBUS0, 0);
+ intel_de_write(dev_priv, GMBUS4, 0);
}
static void pnv_gmbus_clock_gating(struct drm_i915_private *dev_priv,
@@ -153,12 +153,12 @@ static void pnv_gmbus_clock_gating(struct drm_i915_private *dev_priv,
u32 val;
/* When using bit bashing for I2C, this bit needs to be set to 1 */
- val = I915_READ(DSPCLK_GATE_D);
+ val = intel_de_read(dev_priv, DSPCLK_GATE_D);
if (!enable)
val |= PNV_GMBUSUNIT_CLOCK_GATE_DISABLE;
else
val &= ~PNV_GMBUSUNIT_CLOCK_GATE_DISABLE;
- I915_WRITE(DSPCLK_GATE_D, val);
+ intel_de_write(dev_priv, DSPCLK_GATE_D, val);
}
static void pch_gmbus_clock_gating(struct drm_i915_private *dev_priv,
@@ -166,12 +166,12 @@ static void pch_gmbus_clock_gating(struct drm_i915_private *dev_priv,
{
u32 val;
- val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val = intel_de_read(dev_priv, SOUTH_DSPCLK_GATE_D);
if (!enable)
val |= PCH_GMBUSUNIT_CLOCK_GATE_DISABLE;
else
val &= ~PCH_GMBUSUNIT_CLOCK_GATE_DISABLE;
- I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ intel_de_write(dev_priv, SOUTH_DSPCLK_GATE_D, val);
}
static void bxt_gmbus_clock_gating(struct drm_i915_private *dev_priv,
@@ -179,12 +179,12 @@ static void bxt_gmbus_clock_gating(struct drm_i915_private *dev_priv,
{
u32 val;
- val = I915_READ(GEN9_CLKGATE_DIS_4);
+ val = intel_de_read(dev_priv, GEN9_CLKGATE_DIS_4);
if (!enable)
val |= BXT_GMBUS_GATING_DIS;
else
val &= ~BXT_GMBUS_GATING_DIS;
- I915_WRITE(GEN9_CLKGATE_DIS_4, val);
+ intel_de_write(dev_priv, GEN9_CLKGATE_DIS_4, val);
}
static u32 get_reserved(struct intel_gmbus *bus)
@@ -337,14 +337,16 @@ static int gmbus_wait(struct drm_i915_private *dev_priv, u32 status, u32 irq_en)
irq_en = 0;
add_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
- I915_WRITE_FW(GMBUS4, irq_en);
+ intel_de_write_fw(dev_priv, GMBUS4, irq_en);
status |= GMBUS_SATOER;
- ret = wait_for_us((gmbus2 = I915_READ_FW(GMBUS2)) & status, 2);
+ ret = wait_for_us((gmbus2 = intel_de_read_fw(dev_priv, GMBUS2)) & status,
+ 2);
if (ret)
- ret = wait_for((gmbus2 = I915_READ_FW(GMBUS2)) & status, 50);
+ ret = wait_for((gmbus2 = intel_de_read_fw(dev_priv, GMBUS2)) & status,
+ 50);
- I915_WRITE_FW(GMBUS4, 0);
+ intel_de_write_fw(dev_priv, GMBUS4, 0);
remove_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
if (gmbus2 & GMBUS_SATOER)
@@ -366,13 +368,13 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
irq_enable = GMBUS_IDLE_EN;
add_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
- I915_WRITE_FW(GMBUS4, irq_enable);
+ intel_de_write_fw(dev_priv, GMBUS4, irq_enable);
ret = intel_wait_for_register_fw(&dev_priv->uncore,
GMBUS2, GMBUS_ACTIVE, 0,
10);
- I915_WRITE_FW(GMBUS4, 0);
+ intel_de_write_fw(dev_priv, GMBUS4, 0);
remove_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
return ret;
@@ -404,15 +406,12 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
len++;
}
size = len % 256 + 256;
- I915_WRITE_FW(GMBUS0, gmbus0_reg | GMBUS_BYTE_CNT_OVERRIDE);
+ intel_de_write_fw(dev_priv, GMBUS0,
+ gmbus0_reg | GMBUS_BYTE_CNT_OVERRIDE);
}
- I915_WRITE_FW(GMBUS1,
- gmbus1_index |
- GMBUS_CYCLE_WAIT |
- (size << GMBUS_BYTE_COUNT_SHIFT) |
- (addr << GMBUS_SLAVE_ADDR_SHIFT) |
- GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+ intel_de_write_fw(dev_priv, GMBUS1,
+ gmbus1_index | GMBUS_CYCLE_WAIT | (size << GMBUS_BYTE_COUNT_SHIFT) | (addr << GMBUS_SLAVE_ADDR_SHIFT) | GMBUS_SLAVE_READ | GMBUS_SW_RDY);
while (len) {
int ret;
u32 val, loop = 0;
@@ -421,7 +420,7 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
if (ret)
return ret;
- val = I915_READ_FW(GMBUS3);
+ val = intel_de_read_fw(dev_priv, GMBUS3);
do {
if (extra_byte_added && len == 1)
break;
@@ -432,7 +431,7 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
if (burst_read && len == size - 4)
/* Reset the override bit */
- I915_WRITE_FW(GMBUS0, gmbus0_reg);
+ intel_de_write_fw(dev_priv, GMBUS0, gmbus0_reg);
}
return 0;
@@ -489,12 +488,9 @@ gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
len -= 1;
}
- I915_WRITE_FW(GMBUS3, val);
- I915_WRITE_FW(GMBUS1,
- gmbus1_index | GMBUS_CYCLE_WAIT |
- (chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
- (addr << GMBUS_SLAVE_ADDR_SHIFT) |
- GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+ intel_de_write_fw(dev_priv, GMBUS3, val);
+ intel_de_write_fw(dev_priv, GMBUS1,
+ gmbus1_index | GMBUS_CYCLE_WAIT | (chunk_size << GMBUS_BYTE_COUNT_SHIFT) | (addr << GMBUS_SLAVE_ADDR_SHIFT) | GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
while (len) {
int ret;
@@ -503,7 +499,7 @@ gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
val |= *buf++ << (8 * loop);
} while (--len && ++loop < 4);
- I915_WRITE_FW(GMBUS3, val);
+ intel_de_write_fw(dev_priv, GMBUS3, val);
ret = gmbus_wait(dev_priv, GMBUS_HW_RDY, GMBUS_HW_RDY_EN);
if (ret)
@@ -568,7 +564,7 @@ gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs,
/* GMBUS5 holds 16-bit index */
if (gmbus5)
- I915_WRITE_FW(GMBUS5, gmbus5);
+ intel_de_write_fw(dev_priv, GMBUS5, gmbus5);
if (msgs[1].flags & I2C_M_RD)
ret = gmbus_xfer_read(dev_priv, &msgs[1], gmbus0_reg,
@@ -578,7 +574,7 @@ gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs,
/* Clear GMBUS5 after each index transfer */
if (gmbus5)
- I915_WRITE_FW(GMBUS5, 0);
+ intel_de_write_fw(dev_priv, GMBUS5, 0);
return ret;
}
@@ -601,7 +597,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
pch_gmbus_clock_gating(dev_priv, false);
retry:
- I915_WRITE_FW(GMBUS0, gmbus0_source | bus->reg0);
+ intel_de_write_fw(dev_priv, GMBUS0, gmbus0_source | bus->reg0);
for (; i < num; i += inc) {
inc = 1;
@@ -629,7 +625,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
* a STOP on the very first cycle. To simplify the code we
* unconditionally generate the STOP condition with an additional gmbus
* cycle. */
- I915_WRITE_FW(GMBUS1, GMBUS_CYCLE_STOP | GMBUS_SW_RDY);
+ intel_de_write_fw(dev_priv, GMBUS1, GMBUS_CYCLE_STOP | GMBUS_SW_RDY);
/* Mark the GMBUS interface as disabled after waiting for idle.
* We will re-enable it at the start of the next xfer,
@@ -640,7 +636,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
adapter->name);
ret = -ETIMEDOUT;
}
- I915_WRITE_FW(GMBUS0, 0);
+ intel_de_write_fw(dev_priv, GMBUS0, 0);
ret = ret ?: i;
goto out;
@@ -669,9 +665,9 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
* of resetting the GMBUS controller and so clearing the
* BUS_ERROR raised by the slave's NAK.
*/
- I915_WRITE_FW(GMBUS1, GMBUS_SW_CLR_INT);
- I915_WRITE_FW(GMBUS1, 0);
- I915_WRITE_FW(GMBUS0, 0);
+ intel_de_write_fw(dev_priv, GMBUS1, GMBUS_SW_CLR_INT);
+ intel_de_write_fw(dev_priv, GMBUS1, 0);
+ intel_de_write_fw(dev_priv, GMBUS0, 0);
DRM_DEBUG_KMS("GMBUS [%s] NAK for addr: %04x %c(%d)\n",
adapter->name, msgs[i].addr,
@@ -694,7 +690,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num,
timeout:
DRM_DEBUG_KMS("GMBUS [%s] timed out, falling back to bit banging on pin %d\n",
bus->adapter.name, bus->reg0 & 0xff);
- I915_WRITE_FW(GMBUS0, 0);
+ intel_de_write_fw(dev_priv, GMBUS0, 0);
/*
* Hardware may not support GMBUS over these pins? Try GPIO bitbanging
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
