Move away from I915_READ_FW() and I915_WRITE_FW() in display code, and
switch to using intel_de_read_fw() and intel_de_write_fw(),
respectively.
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_irq.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8b338744eddf..7cd1f5ca7fce 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -624,9 +624,9 @@ u32 i915_get_vblank_counter(struct drm_crtc *crtc)
* register.
*/
do {
- high1 = I915_READ_FW(high_frame) & PIPE_FRAME_HIGH_MASK;
- low = I915_READ_FW(low_frame);
- high2 = I915_READ_FW(high_frame) & PIPE_FRAME_HIGH_MASK;
+ high1 = intel_de_read_fw(dev_priv, high_frame) & PIPE_FRAME_HIGH_MASK;
+ low = intel_de_read_fw(dev_priv, low_frame);
+ high2 = intel_de_read_fw(dev_priv, high_frame) & PIPE_FRAME_HIGH_MASK;
} while (high1 != high2);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
@@ -683,15 +683,17 @@ static u32 __intel_get_crtc_scanline_from_timestamp(struct intel_crtc *crtc)
* pipe frame time stamp. The time stamp value
* is sampled at every start of vertical blank.
*/
- scan_prev_time = I915_READ_FW(PIPE_FRMTMSTMP(crtc->pipe));
+ scan_prev_time = intel_de_read_fw(dev_priv,
+ PIPE_FRMTMSTMP(crtc->pipe));
/*
* The TIMESTAMP_CTR register has the current
* time stamp value.
*/
- scan_curr_time = I915_READ_FW(IVB_TIMESTAMP_CTR);
+ scan_curr_time = intel_de_read_fw(dev_priv, IVB_TIMESTAMP_CTR);
- scan_post_time = I915_READ_FW(PIPE_FRMTMSTMP(crtc->pipe));
+ scan_post_time = intel_de_read_fw(dev_priv,
+ PIPE_FRMTMSTMP(crtc->pipe));
} while (scan_post_time != scan_prev_time);
scanline = div_u64(mul_u32_u32(scan_curr_time - scan_prev_time,
@@ -726,9 +728,9 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
vtotal /= 2;
if (IS_GEN(dev_priv, 2))
- position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
+ position = intel_de_read_fw(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
else
- position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
+ position = intel_de_read_fw(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
/*
* On HSW, the DSL reg (0x70000) appears to return 0 if we
@@ -747,7 +749,7 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
for (i = 0; i < 100; i++) {
udelay(1);
- temp = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
+ temp = intel_de_read_fw(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
if (temp != position) {
position = temp;
break;
@@ -818,7 +820,7 @@ bool i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int index,
* We can split this into vertical and horizontal
* scanout position.
*/
- position = (I915_READ_FW(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
+ position = (intel_de_read_fw(dev_priv, PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
/* convert to pixel counts */
vbl_start *= htotal;
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
