On Wed, Sep 18, 2019 at 09:57:29AM +0200, Maarten Lankhorst wrote:
> Op 18-09-2019 om 02:33 schreef Manasi Navare:
> > After the state is committed, we readout the HW registers and compare
> > the HW state with the SW state that we just committed.
> > For Transcdoer port sync, we add master_transcoder and the
> > salves bitmask to the crtc_state, hence we need to read those during
> > the HW state readout to avoid pipe state mismatch.
> >
> > v2:
> > * Add Transcoder_D and MISSING_CASE (Maarten)
> >
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 49 ++++++++++++++++++++
> > 1 file changed, 49 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index b0f76e47f5a6..bea3f631ad36 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -10439,6 +10439,52 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
> > }
> > }
> >
> > +static void icelake_get_trans_port_sync_config(struct intel_crtc *crtc,
> > + struct intel_crtc_state *pipe_config)
> > +{
> > + struct drm_device *dev = crtc->base.dev;
> > + struct drm_i915_private *dev_priv = to_i915(dev);
> > + u32 trans_port_sync, transcoders, master_select;
> > + enum transcoder cpu_transcoder;
> > +
> > + trans_port_sync = I915_READ(TRANS_DDI_FUNC_CTL2(pipe_config->cpu_transcoder));
> > + if (trans_port_sync & PORT_SYNC_MODE_ENABLE) {
> > + master_select = trans_port_sync &
> > + PORT_SYNC_MODE_MASTER_SELECT_MASK;
> > + switch (master_select) {
> > + case 1:
> > + pipe_config->master_transcoder = TRANSCODER_A;
> > + break;
> > + case 2:
> > + pipe_config->master_transcoder = TRANSCODER_B;
> > + break;
> > + case 3:
> > + pipe_config->master_transcoder = TRANSCODER_C;
> > + break;
> > + case 4:
> > + pipe_config->master_transcoder = TRANSCODER_D;
> > + break;
> > + default:
> > + MISSING_CASE(master_select);
> > + }
> > +
> > + pipe_config->sync_mode_slaves_mask = 0;
> > + } else {
> > + pipe_config->master_transcoder = INVALID_TRANSCODER;
> > +
> > + transcoders = BIT(TRANSCODER_EDP) |
> > + BIT(TRANSCODER_A) |
> > + BIT(TRANSCODER_B) |
> > + BIT(TRANSCODER_C);
> ^Missed one spot for transcoder D.. also EDP is still here?
No EDP should be out and TRANS D added, will make that change, sorry about that
Regards
Manasi
> > + for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) {
> > + trans_port_sync = I915_READ(TRANS_DDI_FUNC_CTL2(cpu_transcoder));
> > +
> > + if (trans_port_sync & PORT_SYNC_MODE_ENABLE)
> > + pipe_config->sync_mode_slaves_mask |= BIT(cpu_transcoder);
> > + }
> > + }
> > +}
> > +
> > static bool haswell_get_pipe_config(struct intel_crtc *crtc,
> > struct intel_crtc_state *pipe_config)
> > {
> > @@ -10535,6 +10581,9 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
> > pipe_config->pixel_multiplier = 1;
> > }
> >
> > + if (INTEL_GEN(dev_priv) >= 11)
> > + icelake_get_trans_port_sync_config(crtc, pipe_config);
> > +
> > out:
> > for_each_power_domain(power_domain, power_domain_mask)
> > intel_display_power_put(dev_priv,
>
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
