Re: [PATCH 07/14] drm/i915/tgl: Add support for dkl pll write

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 13, 2019 at 3:33 PM José Roberto de Souza
<jose.souza@xxxxxxxxx> wrote:
>
> From: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>
> Add a new function to write to dkl phy pll registers. As per the
> bspec all the registers are read modify write.
>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 65 ++++++++++++++++++-
>  1 file changed, 64 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index 424f9213c80d..afc9b609b63d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -3293,7 +3293,70 @@ static void icl_mg_pll_write(struct drm_i915_private *dev_priv,
>  static void dkl_pll_write(struct drm_i915_private *dev_priv,
>                           struct intel_shared_dpll *pll)
>  {
> -       /* TODO */
> +       struct intel_dpll_hw_state *hw_state = &pll->state.hw_state;
> +       enum tc_port tc_port = icl_pll_id_to_tc_port(pll->info->id);
> +       u32 val;
> +
> +       /*
> +        * All registers programmed here have the same HIP_INDEX_REG even
> +        * though on different building block
> +        */
> +       I915_WRITE(HIP_INDEX_REG(tc_port), 0x2);
> +
> +       /* All the registers are RMW */

I wish we could use intel_uncore_rmw() here to make this comment go
away and make it simpler
in general. But I understand the conversion to use uncore should still
not be done in display. Should we add
I195_RMW() meanwhile or it's not worth it? +Jani.

Lucas De Marchi

> +       val = I915_READ(DKL_REFCLKIN_CTL(tc_port));
> +       val &= ~MG_REFCLKIN_CTL_OD_2_MUX_MASK;
> +       val |= hw_state->mg_refclkin_ctl;
> +       I915_WRITE(DKL_REFCLKIN_CTL(tc_port), val);
> +
> +       val = I915_READ(DKL_CLKTOP2_CORECLKCTL1(tc_port));
> +       val &= ~MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
> +       val |= hw_state->mg_clktop2_coreclkctl1;
> +       I915_WRITE(DKL_CLKTOP2_CORECLKCTL1(tc_port), val);
> +
> +       val = I915_READ(DKL_CLKTOP2_HSCLKCTL(tc_port));
> +       val &= ~(MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK |
> +              MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
> +              MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
> +              MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK);
> +       val |= hw_state->mg_clktop2_hsclkctl;
> +       I915_WRITE(DKL_CLKTOP2_HSCLKCTL(tc_port), val);
> +
> +       val = I915_READ(DKL_PLL_DIV0(tc_port));
> +       val &= ~(DKL_PLL_DIV0_INTEG_COEFF_MASK |
> +               DKL_PLL_DIV0_PROP_COEFF_MASK |
> +               DKL_PLL_DIV0_FBPREDIV_MASK |
> +               DKL_PLL_DIV0_FBDIV_INT_MASK);
> +       val |= hw_state->mg_pll_div0;
> +       I915_WRITE(DKL_PLL_DIV0(tc_port), val);
> +
> +       val = I915_READ(DKL_PLL_DIV1(tc_port));
> +       val &= ~(DKL_PLL_DIV1_IREF_TRIM_MASK |
> +                DKL_PLL_DIV1_TDC_TARGET_CNT_MASK);
> +       val |= hw_state->mg_pll_div1;
> +       I915_WRITE(DKL_PLL_DIV1(tc_port), val);
> +
> +       val = I915_READ(DKL_PLL_SSC(tc_port));
> +       val &= ~(DKL_PLL_SSC_IREF_NDIV_RATIO_MASK |
> +               DKL_PLL_SSC_STEP_LEN_MASK |
> +               DKL_PLL_SSC_STEP_NUM_MASK |
> +               DKL_PLL_SSC_EN);
> +       val |= hw_state->mg_pll_ssc;
> +       I915_WRITE(DKL_PLL_SSC(tc_port), val);
> +
> +       val = I915_READ(DKL_PLL_BIAS(tc_port));
> +       val &= ~(DKL_PLL_BIAS_FRAC_EN_H |
> +               DKL_PLL_BIAS_FBDIV_FRAC_MASK);
> +       val |= hw_state->mg_pll_bias;
> +       I915_WRITE(DKL_PLL_BIAS(tc_port), val);
> +
> +       val = I915_READ(DKL_PLL_TDC_COLDST_BIAS(tc_port));
> +       val &= ~(DKL_PLL_TDC_SSC_STEP_SIZE_MASK |
> +               DKL_PLL_TDC_FEED_FWD_GAIN_MASK);
> +       val |= hw_state->mg_pll_tdc_coldst_bias;
> +       I915_WRITE(DKL_PLL_TDC_COLDST_BIAS(tc_port), val);
> +
> +       POSTING_READ(DKL_PLL_TDC_COLDST_BIAS(tc_port));
>  }
>
>  static void icl_pll_power_enable(struct drm_i915_private *dev_priv,
> --
> 2.23.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Lucas De Marchi
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux