For TGL, there is no need to keep DDI clock on till IO enabling
for mipi dsi.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/icl_dsi.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index c6cda529c5bb..eaf2779b89b8 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -607,7 +607,10 @@ static void gen11_dsi_map_pll(struct intel_encoder *encoder,
I915_WRITE(ICL_DPCLKA_CFGCR0, val);
for_each_dsi_phy(phy, intel_dsi->phys) {
- val &= ~ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
+ if (INTEL_GEN(dev_priv) >= 12)
+ val |= ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
+ else
+ val &= ~ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
}
I915_WRITE(ICL_DPCLKA_CFGCR0, val);
@@ -951,6 +954,8 @@ static void
gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
/* step 4a: power up all lanes of the DDI used by DSI */
gen11_dsi_power_up_lanes(encoder);
@@ -973,7 +978,8 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
gen11_dsi_configure_transcoder(encoder, pipe_config);
/* Step 4l: Gate DDI clocks */
- gen11_dsi_gate_clocks(encoder);
+ if (IS_GEN(dev_priv, 11))
+ gen11_dsi_gate_clocks(encoder);
}
static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
--
2.21.0.5.gaeb582a
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
